Modeling of deformation induced anisotropy in free-end torsion

International Journal of Plasticity

Volumn 19, Issue 11 SPEC., 2003, Pages 1867-1884

  Böhlke, Thomas ^a   Bertram, Albrecht ^a   Krempl, Erhard ^b  

^a OTTO VON GUERICKE UNIVERSITY   (Germany)

^b RENSSELAER POLYTECHNIC INSTITUTE   (United States)

Author keywords

Anisotropic material; Constitutive behaviour; Finite strain; Inhomogeneous material; Polycrystalline material

Indexed keywords

ANISOTROPY; DEFORMATION; ELASTICITY; POLYCRYSTALS; TENSORS; VISCOPLASTICITY;

ANISOTROPIC MATERIALS;

TORSIONAL STRESS;

EID: 0037675965     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(03)00043-3     Document Type: Conference Paper

References (51)

1. Armstrong, P., Frederick, C, 1966. A Mathematical Representation of the Multiaxial Bauschinger effect. Report RD/B/N 731.
2. Barlat, F., J.M., F. D., Gracio, J., Lopes, A., Rauch, E. Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample. Int. J. Plasticity (in press).
3. Bertram, A., 1992. Description of finite inelastic deformations. In: Benallal, A., Billardon, R., Marquis, D. (Eds.), Proceedings of MECAMAT'92, International Seminar on Multiaxial Plasticity.
4. Bertram A. An alternative approach to finite plasticity based on material isomorphisms. Int. J. Plast. 15(3):1999;353-374.
5. Billington E. Non-linear mechanical response of various metals. II permanent length changes in twisted tubes J. Phys. D10:1976;533-552.
6. Böhlke, T., 2001. Crystallographic Texture Evolution and Elastic Anisotropy: Simulation, Modeling, and Applications. Shaker Verlag, Dissertation, Otto-von-Guericke-Universität Magdeburg.
7. Böhlke, T., Bertram, A., 1998. Simulation of texture development and induced anisotropy of polycrystals. In: Atluri, S., O'Donoghue, P. (Eds.), Proceedings of ICES'98, Modelling and Simulation Based Engineering.
8. Böhlke T., Bertram A. A minimum problem defining effective isotropic elastic properties. Z. Angew. Math. Mech. 80(S2):2000;S419-S420.
9. Böhlke T., Bertram A. The evolution of Hooke's law due to texture development in polycrystals. Int. J. Sol. Struct. 38(52):2001;9437-9459.
10. Böhlke, T., Bertram, A., 2002. Crystallographic texture induced anisotropy in copper: an approach based on a tensorial fourier expansion of the codf. In: Proceedings of the 6th European Mechanics of Materials Conference (EMMC6), pp. 273-280 (to appear in Journal de Physique IV).
11. Bunge H.-J., Roberts W. Orientation distribution, elastic and plastic anisotropy in stabilized steel sheet. J. Appl. Cryst. 2:1969;116-128.
12. Cho H., Dafalias Y. Distortional and orientational hardening at large viscoplastic deformations. Int. J. Plast. 12(7):1996;903-925.
13. Davies G., Goodwill D., Kallend J. Elastic and plastic anisotropy in sheets of cubic metals. Met. Trans. 3:1972;1627-1631.
14. Gil-Sevillano J., Van Houtte P., Aernoudt E. Deutung der Schertexturen mit Hilfe der Taylor-Analyse. Z. Metallkunde. 66:1975;367.
15. Grewe H., Kappler E. Über die Ermittlung der Verfestigungskurve durch den Torsionsversuch and zylindrischen Vollstäben and das Verhalten von vielkristallinem Kupfer bei sehr hoher plastischer Schubverformung. Phys. Stat. Sol. 6:1964;339-354.
16. Hahne, M., 1993. Beschreibung der plastischen Längsdehnung bei Torsion mit einem makroskopischen Stoffgesetz. In: Braunschweiger Schriften zur Mechanik Nr. 12-1993. Institut für Allgemeine Mechanik und Festigkeitslehre, TU Braunschweig.
17. Harren S., Lowe T., Asaro R., Needleman A. Analysis of large-strain shear in rate-dependent face-centered cubic polycrystals. correlation of micro- and macro-mechanics Phil. Trans. R. Soc. Lond. A. A328:1989;443-500.
18. Hill R. A theory of yielding and plastic flow of anisotropic materials. Proc. Phys. Soc. Lond. A. 193:1948;281-297.
19. Ishikawa H. Constitutive model of plasticity in finite deformation. Int. J. Plasticity. 15:1999;299-317.
20. Kallend J., Davies G. The elastic and plastic anisotropy of cold-rolled sheets of copper, gilding metal, and α-brass. J. Inst. Met. 5:1971;257-260.
21. Krempl, E., 1994. Deformation Induced Anisotropy. RPI-Report MML 94-93.
22. Krempl E. The overstress dependence of inelastic rate of deformation inferred from transition tests. Mat. Sci. Res. Int. 1(1):1995;3-10.
23. Krempl E. A small-strain viscoplasticity theory based on overstress. Unified Constitutive laws of plastic deformation. 1996;Academic Press Inc.
24. Kuroda M. Interpretation of the behavior of metals under large plastic shear deformations. a macroscopic approach Int. J. Plasticity. 13(4):1997;359-383.
25. Kuroda M. Interpretation of the behavior of metals under large plastic shear deformations. comparison of macroscopic predictions to physically based predictions Int. J. Plast. 15(4):1999;1217-1236.
26. Lin T. Analysis of elastic and plastic strains of a face-centered cubic crystal. J. Mech. Phys. Solids. 5:1957;143-149.
27. Majors P., Krempl E. Comments on induced anisotropy, the Swift effect, and finite deformation inelasticity. Mech. Res. Comm. 21:1994;465-472.
28. Man C.-S. On the correlation of elastic and plastic anisotropy in sheet metals. J. Elast. 39:1995;165-173.
29. Man C.-S. On the constitutive equations of some weakly-textured materials. Arch. Rat. Mech. Anal. 143:1998;77-103.
30. Man C.-S. On the r-value of textured sheet metals. Int. J. Plasticity. 18(12):2002;1683-1706.
31. Méric, L. and Cailletaud, G., 1992. Finite element implementation of a model for single crystals at finite strain. In: Ladevèze, P. and Zienkiewicz, O.(Eds.), New Advances in Computational Structural Mechanics.
32. Méric L., Cailletaud G., Gaspérini M. Calculations of copper bicrystal specimens submitted to tension-compression tests. Acta Metall. Mater. 42(3):1994;921-935.
33. Miller M., McDowell D. Modeling large strain multiaxial effects in fcc polycrystals. Int. J. Plast. 12(7):1996;875-902.
34. Montheillet F., Cohen M., Jonas J. Axial stresses and and texture development during the torsion testing of Al, Cu and α-Fe. Acta Metall. 32(11):1984;2077-2089.
35. Montheillet F., Gilormini P., Jonas J. Relation between axial stresses and exture development during torsion testing. a simplified theory Acta Metall. 33(4):1985;705-717.
36. Pan W.-F. Endochronic analysis for finite elasto-plastic deformation and application to metal tube under torsion and metal rectangular block under biaxial compression. Int. J. Plasticity. 12(10):1996;1287-1316.
37. Pan W.-F. Endochronic simulation for finite visco-plastic deformation. Int. J. Plasticity. 13(6-7):1997;571-586.
38. Portier L., ad Calloch S., Marquis D., Geyer P. Ratchetting under tension-torsion loadings. experiments and modelling Int. J. Plasticity. 16:2000;303-335.
39. Stickels C., Mould P. The use of Young's modulus for predicting the plastic-strain ratio of low-carbon steel sheets. Met. Trans. 1:1970;1303-1312.
40. Stüwe H., Turck H. Zur Messung von Flie¡ortkurven im Torsionsversuch. Z. Metallk. 55:1964;699-703.
41. Swift H. Length changes in metals under torsional overstrain. Engineering. 163:1947;253-257.
42. Taylor G. Plastic strain in metals. J. Inst. Metals. 62:1938;307-324.
43. Toth L., Jonas J., Daniel D., Bailey J. Texture development and length changes in copper bars subjected to free end torsion. Textures Microstruct. 10:1992;245-262.
44. Van der Giessen E., Wu P., Neale K. On the effect of plastic spin on large strain elastic-plastic torsion of solid bars. Int. J. Plast. 8:1992;773-801.
45. von Mises R. Mechanik der plastischen Formänderung bei Kristallen. Z. Angew. Math. Mech. 8(3):1928;161-185.
46. Witzel W. Längenänderungen und Längskräfte bei Torsionsbeanspruchung. Stüwe H.-P. Verformung und Bruch, Verlag der Östereichischen Akademie der Wissenschaften. 1981.
47. Wu H.-C. On finite plastic deformation of anisotropic metallic materials. Int. J. Plasticity. 19(1):2003;91-119.
48. Wu H.-C., Xu Z., Wang P. Torsion test of aluminum in the large strain range. Int. J. Plasticity. 13(10):1997;873-892.
49. Xiao H., Bruhns O., Meyers A. Large strain responses of elastic-perfect plasticity and kinematic hardening plasticity with the logarithmic rate. Swift effect in torsion Int. J. Plasticity. 17:2001;211-235.
50. Zbib H. On the mechanics of large deformations. noncoaxiality, axial effects in torsion and localization Acta Mech. 87:1991;179.
51. Zbib H., Aifantis E. On the concept of relative and plastic spin and its implications to large deformation theories. Part I. hypoelasticity andvertex-type plasticity Acta Mech. 75:1998;15.