Cyclic generation of wall slip at the exit of plane Couette flow

Journal of Rheology

Volumn 47, Issue 3, 2003, Pages 737-757

  Mizunuma, Hiroshi ^a   Takagi, Hideyuki ^a  

^a TOKYO METROPOLITAN UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CAVITATION; MICROSCOPIC EXAMINATION; PARTICLE BEAM TRACKING; PRESSURE EFFECTS; SHEAR FLOW; SURFACE ROUGHNESS; VELOCITY MEASUREMENT;

COUETTE FLOW; DIFFERENTIAL INTERFERENCE CONTRAST MICROSCOPE; DOPPLER VELOCIMETRY; FLOW INSTABILITY; NEGATIVE PRESSURE GRADIENT; WALL SLIP;

WALL FLOW;

EID: 0037523274     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.1562154     Document Type: Article

References (33)

1. Acheson, D. J. Elementary Fluid Dynamics (Oxford University Press, New York, 1990), pp. 248-249.
2. Anastasiadis, S. H., and S. G. Hatzikiriakos, "The work of adhesion of polymer/wall interfaces and its association with the onset of wall slip," J. Rheol. 42, 795-812 (1998).
3. Barone, J. R., and S. Q. Wang, "Rheo-optical observations of sharkskin formation in slit-die extrusion," J. Rheol. 42, 813-832 (1998).
4. Bergem, N., "Visualization studies of polymer melt flow anomalies in extrusion," Proceedings of the VIIth International Congress of Rheology, edited by C. Klason and J. Kubat (Swedish Society of Rheology, Gothenberg, Sweden, 1976), pp. 51-54.
5. Brochard, F., and P. G. de Gennes, "Shear-dependent slippage at a polymer/solid interface," Langmuir 8, 3033-3037 (1992).
6. Cogswell, E. N., "Stretching flow instabilities at the exists of extrusion dies," J. Non-Newtonian Fluid Mech. 2, 37-47 (1977).
7. Denn, M. M. "Extrusion instabilities and wall slip," Annu. Rev. Fluid Mech. 33, 265-287 (2001).
8. Durst, F., A. Melling, and J. H. Whitelaw, Principles and Practice of Laser-Doppler Anemometry, 2nd ed. (Academic, New York, 1981).
9. Gavis, J., and M. Modan, "Expansion and contraction of jets of Newtonian liquids in air: Effect of tube length," Phys. Fluids 10, 487-497 (1967).
10. Ghanta, V. G., B. L. Riise, and M. M. Denn, "Disappearance of capillary instabilities in brass capillary dies," J. Rheol. 43, 435-442 (1999).
11. Hill, D. A., T. Hasegawa, and M. M. Denn, "On the apparent relation between adhesive failure and melt fracture," J. Rheol. 34, 891-918 (1990).
12. Hill, D. A., M. Q. Salmeron, and M. M. Denn, "Post-fracture analyses of polyethylene-metal interfaces," Chem. Eng. Sci. 49, 655 (1994).
13. Howells, E. R., and J. J. Benbow, "Flow defects in polymer melts," Trans. Plastics Inst. 30, 240-253 (1962).
14. Inn, Y. W., R. J. Fischer, and M. T. Shaw, "Visual observation of development of sharkskin melt fracture in polybutadiene extrusion," Rheol. Acta 37, 573-582 (1998).
15. Kanoh, Y., T. Shibata, H. Usui, and S. Yao, "Influence of contact surface wetting on wall slip in a flow of molten polymer (in Japanese)," Nihon Reoroji Gakkaishi 24, 177-181 (1996)
16. Kissi, N. El, and J. M. Piau, "The different capillary flow regimes of entangled polydimethylsiloxane polymer: macroscopic slip at the wall hysteresis and cork flow," J. Rheol. 37, 55-94 (1990).
17. Koran, F., and J. M. Daily, "Wall slip of polyisobutylene: Interfacial and pressure effects," J. Rheol. 43, 1291-1306 (1999).
18. Mhetar, V., and L. A. Archer, "Slip in entangled polymer melts. 1. General features," Macromolecules 31, 8607-8616 (1998a).
19. Mhetar, V., and L. A. Archer, "Slip in entangled polymer melts. 2. Effect of surface treatment," Macromolecules 31, 8617-8622, (1998b).
20. Migler, K., H. Hervet, and L. Leger, "Slip transition of a polymer melt under shear stress," Phys. Rev. Lett. 70, 287-190, (1993).
21. Migler, K. B., Y. Son, F. Qiau, and K. Flynn, "Extensional deformation, cohesive failure, and boundary conditions during sharkskin melt fracture," J. Rheol. 46, 383-400 (2002).
22. Münstedt, H., M. Schmidt, and W. Wassner, "Stick and slip phenomena during extrusion of polyethylene melts as investigated by laser-Doppler velocimetry," J. Rheol. 44, 413-427 (2000).
23. Pearson, J. R. A., Mechanics of Polymer Processing (Elsevier Science, New York, 1985).
24. Piau, J. M., N. El Kissi, and B. Tremblay, "Influence of upstream instabilities and wall slip on melt fracture and sharkskin phenomena during silicones extrusion through orifice dies," J. Non-Newtonian Fluid Mech. 34, 145-180 (1990).
25. Piau, J. M., N. El Kissi, F. Toussaint, and A. Mezghani, "Distortions of polymer melts and extrudates and their elimination using slippery surfaces," Rheol. Acta 34, 40-57 (1995a).
26. Piau, J. M., N. Kissi, and A. Mezghani, "Slip flow of polybutadiene through fluorinated dies," J. Non-Newtonian Fluid Mech. 59, 11-30 (1995b).
27. Ramamurthy, A. V., "Wall slip in viscous fluids and influence of materials of construction," J. Rheol. 30, 337-357 (1986).
28. Richardson, S., "A stick-slip problem related to the motion of a free jet at low Reynolds numbers," Proc. Cambridge Philos. Soc. 67, 477-489 (1970).
29. Silliman, W. J. and L. E. Scriven, "Separating flow near a static contact line: slip at a wall and shape of a free surface," J. Comput. Phys. 34, 287-313 (1980).
30. Tanner, R. I., "Die-swell reconsidered: some numerical solutions using a finite element program," Appl. Poly. Symp. 20, 201-208 (1973).
31. Wang, S. Q., P. A. Drda, and Y. W. Inn, "Exploring molecular origins of sharkskin, partial slip, and slope change in linear low density polyethylene," J. Rheol. 40, 875-898 (1996).
32. Wesson, R. D., and T. C. Papanastasiou, "Flow singularity and slip velocity in plane extrudate swell computations," J. Non-Newtonian Fluid Mech. 26, 277-295 (1988).
33. Wise, G. M., M. M. Denn, A. T. Bell, J. W. Mays, K. Hong, and H. Iatrou, "Surface mobility and slip of polybutadiene melts in shear flow," J. Rheol. 44, 549-567 (2000).