The effect of heat treatment at 500-655 °C on the microstructure and properties of mechanically alloyed Al-Ti-O based material

Materials Science and Engineering: A

Volumn 351, Issue 1-2, 2003, Pages 344-357

  Barlow, I C ^a   Jones, H ^a   Rainforth, W M ^a  

^a UNIVERSITY OF SHEFFIELD   (United Kingdom)

Author keywords

Al based materials; Hardness and tensile properties; Mechanical alloying; Particle coarsening

Indexed keywords

GRAIN SIZE AND SHAPE; HEAT TREATMENT; MECHANICAL ALLOYING; METAL EXTRUSION; MICROSTRUCTURE; TENSILE PROPERTIES; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION ANALYSIS;

FRACTURE SURFACES;

ALUMINUM ALLOYS;

TENSILE STRENGTH;

EID: 0037466822     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0921-5093(02)00860-2     Document Type: Article

References (64)

1. Dix, E. H. (1956). Aero. Eng. Rev.. 15 40-48.
2. Immarigeon, J. -P, Holt, R. T., Koul, A. K., Zhao, L., Wallace, W., & Beddoes, J. C. (1995). Mater. Character.. 40 41-67.
3. Pickens, J. R., Heubaum, F. H., & Kramer, L. S. (1990). Scripta Mater.. 24 457-462.
4. Barlow, I. C., Rainforth, W. M., & Jones, H. (2000). J. Mater. Sci.. 35 1413-1418.
5. Shakesheff, A. J. (1998). Metal Powder Rep.. 53(5), 28-30.
6. I.C. Barlow, Ph.D. Thesis, University of Sheffield, 2001.
7. Barlow, I. C., Jones, H., & Rainforth, W. M. (2001). Scripta Mater.. 44 79-86.
8. I.C. Barlow, H. Jones, W.M. Rainforth, Scripta Mater., 44 (2001) 1089-1093.
9. I.C. Barlow, H. Jones, W.M. Rainforth, 'Evolution and Coarsening of Al2O3. Dispersoids at 500-600°C in Mechanically Alloyed Al-Ti-O', Met. Mater. Trans. A, (2002), in press.
10. Barlow, I. C., Jones, H., & Rainforth, W. M. (2001). Acta Mater.. 49 1209-1244.
11. Wu, J. M., Zheng, S. L., & Li, Z. Z. (2000). Mater. Sci. Eng. A. A289 246-254.
12. Mahidara, R. K. (1997). Mater. Eng. Perf.. 6 102-105.
13. Korb, G., Jangg, G., & Kutner, F. (1979). Wire. 28 258-262.
14. K. Hummert, V. Arnhold, G. Brockmann, in: P/M Aerospace Materials, MPR Publ. Services, Shrewsbury, 1988, pp. 22.1-22.9.
15. Ma, Z. Y., Ning, X. G., Lu, Y. X., Bi, J., & Wen, L. S. (1994). Scripta Mater.. 31 131-135.
16. Bloch, E. A. (1961). Metall. Rev.. 6 193-239.
17. Benjamin, J. S., & Bomford, M. J. (1977). Met. Mater. Trans. A. 8A 1301-1305.
18. Bufferd, A. S., & Grant, N. J. (1967). Trans. ASM. 60 305-309.
19. M.L. Van Meter, S.L. Kampe, A. Lawley, J.M. Campus, R.M. German (Eds.), Advances in Powder Metallurgy and Particulate Materials, vol. 7, 1992, pp. 285-301.
20. Nieh, T. G., McNally, C. M., Wadsworth, J., Yaney, D. L., & Gilman, P. S. (1988). Dispersion-Strengthened Aluminum Alloys. In Y. -W Kim, & W. M. Griffith (Eds.), 681-692. Warrendale, PA: TMS.
21. Gilman, P. S., Brooks, J. W., & Bridges, P. J. (1986). Al-Li Alloys III. In C. Baker, P. J. Grayson, S. I. Harris, & C. J. Peel (Eds.), 112-120. London: The Institute of Metals.
22. Hawk, J. A., Briggs, J. K., & Wilsdorf, H. G. (1989). Adv. Powd. Met.. 3 285-299.
23. Hawk, J. A., Mirchandani, P. K., Benn, R. C., & Wilsdorf, H. G. (1988). Dispersion-Strengthened Aluminium Alloys. In Y. -M Kim, & W. M. Griffiths (Eds.), 551-572. Warrendale, PA: TMS.
24. Kothari, N. C. (1981). Scripta Mater.. 19 251-254.
25. Mirchandani, P. K., Benn, R. C., & Heck, K. A. (1989). Lightweight Alloys for Aerospace Applications. In E. W. Lee, E. H. Chia, N. J. Kim (Eds.), 33-58. Warrendale, PA: The Minerals, Metals and Materials Society.
26. Hawk, J. A., Mirchandani, P. K., Benn, R. C., & Wilsdorf, H. G. (1988). Dispersion-Strengthened Aluminium Alloys. In Y. W. Kim, & W. M. Griffiths (Eds.), 517-537. Warrendale, PA: TMS.
27. Hawk, J. A., Ruch, W., & Wilsdorf, H. G. (1988). Dispersion-Strengthened Aluminum Alloys. In Y. W. Kim, & W. M. Griffiths (Eds.), 603-618. Warrendale, PA: TMS.
28. R, J., Joos, R., & Arzt, E. (1992). Met. Mater. Trans. A. 23A 1521-1539.
29. Hambleton, R., Jones, H., & Rainforth, W. M. (1996). Mater. Sci. Forum. 217-222 925-930.
30. Bane, S. J., Bradfield, J., & Edwards, M. R. (1986). Mater. Sci. Tech.. 2 1025-1030.
31. Hansen, N. (1969). Trans. Met. Soc. AIME. 245 1305-1312.
32. D. Gualandi, P. Jehenson, Proceedings of the Third International Conference on Peaceful Uses of Atomic Energy/Reactor Materials, 1965, pp. 157-172.
33. Kang, S. K., Erich, D. L., & Merrick, H. F. (1982). High Strength P/M Al Alloys. In M. J. Koczak, & G. J. Hildeman (Eds.), 317-328. New York: Met. Soc. AIME.
34. C.J. Tweed, N. Hansen, B. Ralph, Met. Mater. Trans. A, 14A (1983) 2235-2243.
35. Arnhold, V., & Baumgarten, J. (1985). P/M Aerospace Materials. 31.1-31.8. Shrewsbury: MPR Publ. Services.
36. Cheng, Y. C., Wang, S. H., Kao, P. W., & Chang, C. P. (1996). Mater. Sci. Forum. 217-222 1891-1896.
37. Kim, B. J., Moon, K. I., & Lee, K. S. (1999). J. Alloys Compounds. 292 174-180.
38. Y.-W. Kim, in: P/M Aerospace Materials, MPR Publ. Services, Shrewsbury, 1985, pp. 35.1-35.6.
39. Higashi, K., Okada, T., Mukai, T., & Tanimura, S. (1992). Scripta Mater.. 26 761-766.
40. Hasegawa, T., & Miura, T. (1990). Structural Applications of Mechanical Alloying. In F. H. Froes, & J. J. de Barbadillo (Eds.), 213-219. Metals Park, OH: ASM International.
41. Lee, K. -M, & Moon, I. -H (1991). Proc. PM Aerospace Materials. In B. Williams (Ed.), 19.1-19.11. Shrewsbury: MPR Publ. Services.
42. Frazier, W. E., & Koczak, M. J. (1987). Scripta Mater.. 21 129-134.
43. H.C. Angus, G.R.D. Shrimpton, in: P/M Aerospace Materials, MPR Publ. Services, Shrewsbury, 1987, pp. 24.1-24.11.
44. Dravid, V. P., Lyman, C. E., Notis, M. R., & Revcolevschi, A. (1989). Ultramicroscopy. 29 60-70.
45. Ryum, N. (1969). Acta Mater.. 17 269-278.
46. Izumi, O., & Oelschlagel, D. (1969). Scripta Mater.. 3 619-622.
47. Zedalis, M. S., & Fine, M. E. (1986). Met. Mater. Trans. A. 17A 2187.
48. Mitra, R., Chiou, W. A., Fine, M. E., & Weertman, J. R. (1993). J. Mater. Res.. 8 2380-2392.
49. L.M. Rylands, Ph.D. thesis, University of Sheffield, 1995.
50. Voorhees, P. W. (1992). Ann. Rev. Mater. Sci.. 22 197-215.
51. Lifshitz, I. M., & Slyozov, V. V. (1961). J. Phys. Chem. Solids. 19 35-50.
52. Wagner, C. (1961). Z. Electrochem.. 65 27-30.
53. Rylands, L. M., Wilkes, D. M., Rainforth, W. M., & Jones, H. (1994). J. Mater. Sci.. 29 1895-1900.
54. Pontikakos, I., & Jones, H. (1982). Met. Sci.. 16 27-30.
55. Jia, D., Zhou, Y., & Lei, T. (1997). Rare Metal Mater. Eng.. 26 26-29.
56. Otsuka, M., Ishihara, T., Sugamata, M., & Kaneko, J. (1990). Structural Applications of Mechanical Alloying. In F. H. Froes, J. J. de Barbadillo (Eds.), 221-228.
57. Kaneko, J., Sugamata, M., Narashino, C., & Horiuchi, R. (1989). Aluminium. 65 505-507.
58. Vine, W. J., Pitcher, P. D., & Tarrant, A. D. (2001). Mater. Sci. Tech.. 17 645-650.
59. Schiller, P., & Schneiders, A. (1968). J. Nucl. Mater.. 27 115-117.
60. E.A. Starke, Jr., Proceedings of the Sixth International Conference on Strength of Metals and Alloys (1982) 1025-1044.
61. Whitehouse, A. F., & Clyne, T. W. (1994). Mater. Sci. Tech.. 10 468-474.
62. Davidson, D. L. (1991). Met. Mater. Trans. A. 22A 113-123.
63. Van Stone, R. H., Cox, T. B., Low, J. R., & Psioda, J. A. (1985). Int. Met. Rev.. 30 157-179.
64. Mirchandani, P. K., & Benn, R. C. (1988). Space Age Metals Technology. In F. H. Froes, & R. A. Cull (Eds.), 188-201.