J-R curves from through-wall cracked elbow subjected to in-plane bending moment

Journal of Pressure Vessel Technology, Transactions of the ASME

Volumn 125, Issue 1, 2003, Pages 36-45

  Chattopadhyay, J ^a   Pavankumar, T V ^a   Dutta, B K ^a   Kushwaha, H S ^a  

^a BHABHA ATOMIC RESEARCH CENTRE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING MOMENTS; FINITE ELEMENT METHOD; FUNCTIONS; INTEGRAL EQUATIONS; WALLS (STRUCTURAL PARTITIONS);

CRACKED ELBOW;

CRACKS;

EID: 0037325584     PISSN: 00949930     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1511518     Document Type: Article

References (25)

1. Rice, J. R., Paris, P. C., and Merkle, J. G., 1973, "Some Further Results of J-integral Analysis and Estimates," Progress in Flaw Growth and Fracture Toughness Testing, ASTM STM 536, ASTM Spec. Tech. Publ., pp. 231-245.
2. Hutchinson, J. W., and Paris, P. C., 1979, "Stability Analysis of J-Controlled Crack Growth," Elastic-Plastic Fracture, ASTM STP 668, ASTM Spec. Tech. Publ., pp. 37-64.
3. Ernst, H. A., Paris, P. C., Rossow, M., and Hutchinson, J. W., 1979, "Analysis of Load Displacement Relation to Determine J-R Curve and Tearing Instability Material Properties," Fracture Mechanics, ASTM STP 677, C. W. Smith, ed., ASTM Spec. Tech. Publ., pp. 581-599
4. Ernst, H. A., and Paris, P. C., 1980, "Techniques of Analysis of Load-Displacement Records by J-integral Methods," NUREG/CR-1222, US Nuclear Regulatory Commission.
5. Zahoor, A., and Kanninen, M. F., 1981, "A Plastic Fracture Mechanics Prediction of Fracture Instability in a Circumferentially Cracked Pipe in Bending-Part I: J-Integral Analysis," ASME J. Pressure Vessel Technol., 103, pp. 352-358.
6. Wilkowski, G. M., Zahoor, A., and Kanninen, M. F., 1981, "A Plastic Fracture Mechanics Prediction of Fracture Instability in a Circumferentially Cracked Pipe in Bending-Part II: Experimental Verification on a Type 304 Stainless Steel Pipe," ASME J. Pressure Vessel Technol., 103, pp. 359-365.
7. Zahoor, A., and Norris, D. M., 1984, "Ductile Fracture of Circumferentially Cracked Type 304 Stainless Steel Pipes in Tension," ASME J. Pressure Vessel Technol., 106, pp. 399-404.
8. Zahoor, A., 1989, Ductile Fracture Handbook, Vol. 1, EPRI-NP-6301-D, N14-1, Research Project 1757-69, Electric Power Research Institute.
9. Zahoor, A., 1990, "Ductile Fracture Handbook," Vol. 2, EPRI-NP-6301-D, N14-1, Research Project 1757-69, Electric Power Research Institute.
10. Miura, N., and Wilkowski, G. M., 1998, "J-R Curves From Circumferentially Throughwall Cracked Pipe Tests Subjected to Combined Bending and Tension-Part I: Theory and Numerical Simulation," ASME J. Pressure Vessel Technol., 120, pp. 406-411.
11. Miura, N., and Wilkowski, G. M., 1998, "J-R Curves From Circumferentially Throughwall Cracked Pipe Tests Subjected to Combined Bending and Tension-Part II: Experimental and Analytical Validation," ASME J. Pressure Vessel Technol., 120, pp. 412-417.
12. Ernst, H. A., Paris, P. C., and Landes, J. D., 1981, "Estimations of J-integral and Tearing Modulus T from a Single Specimen Test Record," Fracture Mechanics: Thirteenth Conference, ASTM STP 743, R. Roberts, ed., ASTM Spec. Tech. Publ., pp. 476-502.
13. Roos, E., Eisele, U., and Silcher, H., 1986, "A Procedure for the Experimental Assessment of the J-integral by Means of Specimens of Different Geometries," Int. J. Pressure Vessels Piping, 23, pp. 81-93.
14. Chattopadhyay, J., Dutta, B. K., and Kushwaha, H. S., 2001, "Derivation of 'γ' Parameter from Limit Load Expressions of Cracked Component to Evaluate J-R Curve," Int. J. Pressure Vessels Piping, 78, pp. 401-427.
15. Zahoor, A., 1991, Ductile Fracture Handbook, Vol. 3, EPRI-NP-6301-D, N14-1, Research Project 1757-69, Electric Power Research Institute.
16. Chattopadhyay, J., Dutta, B. K., and Kushwaha, H. S., 2000, "Experimental and Analytical Study of Three Point Bend Specimen and Throughwall Circumferentially Cracked Straight Pipe," Int. J. Pressure Vessels Piping, 77, pp. 455-471.
17. th International Conference on Structural Mechanics in Reactor Technology, SMiRT, Vol. G, Brazil, pp. 187-198.
18. Tarafder, S., Sivaprasad, S., Tarafder, M., Prasad, P., Ranganath, V. R. and Das, Swapan, 2000, "Specimen Size and Constraint Effects on J-R curves of SA 333 Gu 6 Steel," Technical Report, National Metallurgical Laboratory, Jamshedpur, India.
19. Chattopadhyay, J., Nathani, D. K., Dutta, B. K., and Kushwaha, H. S., 2000, "Closed-Form Collapse Moment Equations of Elbows Under Combined Internal Pressure and In-plane Bending Moment," ASME J. Pressure Vessel Technol., 122, pp. 431-436.
20. Hilsenkpf, P. et al., 1988, "Experimental Study of Behavior and Functional Capability of Ferritic Steel Elbows and Austenitic Stainless Steel Thin-Walled Elbows," Int. J. Pressure Vessels Piping, 33(2), pp. 111-128.
21. Touboul, F. et al., 1989, "Design Criteria for Piping Components Against Plastic Collapse: Application to Pipe Bend Experiments," Pressure Vessel Technology, Proc. 6th International Conference, Beijing, September 11-15, 1988, eds., Liu, Cengdian, and R. W. Nichols, pp. 73-84.
22. Shalaby, M. A., and Younan, M. Y. A., 1998, "Limit Loads for Pipe Elbows with Internal Pressure Under In-plane Closing Bending Moment," ASME J. Pressure Vessel Technol., 120(1), pp. 35-42.
23. Shalaby, M. A., and Younan, M. Y. A., 1998, "Limit Loads for Pipe Elbows Subjected to In-plane Opening Moment and Internal Pressure," presented ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, CA, July 26-30, ASME PVP-Vol. 368, pp. 163-170.
24. Chattopadhyay, J., Dutta, B. K., Kushwaha, H. S., Mahajan, S. C., and Kakodkar, A., 1994, "A Database to Evaluate Stress Intensity Factors of Elbows with Throughwall Flaws under Combined Internal Pressure and Bending Moment," Int. J. Pressure Vessels Piping, 60, pp. 71-83.
25. Kopenhoefer, K., Gullerud, A. S., Ruggieri, C., Dodds, R. H., Jr., WARP3D-RELEASE 10.8, 1998, "Dynamic Nonlinear Analysis of Solids Using a Pre-conditioned Conjugate Gradient Software Architecture," User's Manual, University of Illinois, Urbana, IL.