Moisture absorption and wet-adhesion properties of resin transfer molded (RTM) composites containing elastomer-coated glass fibers

Journal of Adhesion Science and Technology

Volumn 17, Issue 2, 2003, Pages 217-242

  Barraza, Harry J ^a   Aktas, Levent ^a   Hamidi, Youssef K ^a   Long Jr , John ^a   O'Rear, Edgar A ^a   Altan, M C ^a  

^a UNIVERSITY OF OKLAHOMA   (United States)

Author keywords

Admicellar polymerization; Epoxy; Glass fiber; Moisture absorption; Polystyrene; Resin transfer molding; Styrene isoprene

Indexed keywords

DEBONDING; DIFFUSION; ELASTOMERS; FRACTOGRAPHY; GLASS FIBER REINFORCED PLASTICS; HYDROPHOBICITY; INTERFACIAL ENERGY; MOISTURE; POLYSTYRENES; RESIN TRANSFER MOLDING; SHEAR STRENGTH; STIFFNESS; TENSILE STRENGTH; WATER ABSORPTION; FIBERS; FRACTURE MECHANICS; GLASS FIBERS; INORGANIC COATINGS; RESINS; SORPTION; STYRENE; SURFACE CHEMISTRY;

ADMICELLAR POLYMERIZATION;

ADHESION;

ADMICELLAR POLYMERIZATION; CATASTROPHIC FAILURES; CONSTANT TEMPERATURE; DRY STATE; EFFECTIVE DIFFUSIVITIES; EPOXY; FAILURE PATHS; FIBER PULL OUT; FIBER SURFACE; FIBER-MATRIX ADHESION; HUMID CONDITIONS; HYDROLYTIC STABILITY; INERT MATERIALS; INTERFACIAL DEBONDING; INTERLAMINAR SHEAR STRENGTH; MATRIX; MECHANICAL PERFORMANCE; MOISTURE ABSORPTION; MOISTURE ATTACK; ORGANOSILANES; OVERALL FAILURE; PURE POLYMERS; STYRENE-ISOPRENE; SURFACE ENERGIES; ULTIMATE TENSILE STRENGTH; WATER SATURATIONS; WATER SORPTION;

EID: 0037281959     PISSN: 01694243     EISSN: None     Source Type: Journal    
DOI: 10.1163/156856103762302014     Document Type: Article

References (42)

1. J. L. Thomason and L. J. Adzima, Composites: Part A 32, 313-321 (2001).
2. K. Bezarti, L. Cangemi and F. Dal Maso, Composites: Part A 32, 197-206 (2001).
3. B. K. Larson and L. Drzal, Composites 25, 711-721 (1994).
4. M. Tanoglu, PhD Dissertation, University of Delaware (2000).
5. J. K. Kim, M. L. Sham and J. Wu, Composites Part A 32, 607-618 (2001).
6. A. Nakai, T. Osada, H. Hamada and N. Takeda, Composites Part A 32, 487-498 (2001).
7. R. J. Gorowara, W. E. Kosik, S. H. McKnight and R. L. McCullough, Composites Part A 32 323-329 (2001).
8. J.-P. Pascault, H. Sauterau, J. Verdu and R. J. J. Williams, Thermosetting Polymers. Marcel Dekker, New York (2002).
9. I. Merdas, F. Thominette, A. Tcharkhtchi and J. Verdu, Composites Sci. Technol. 62, 487-492 (2002).
10. M. R. Piggott, A. Sanadi, P. S. Chua and D. Adison, in: Composite Interfaces, H. Ishida and J. L. Koenig (Eds). Elsevier, New York (1986).
11. M. K. Chaudhury, T. M. Gentle and E. P. Plueddemann, J. Adhesion Sci. Technol. 1, 29-38 (1987).
12. M. E. Schrader and A. Block, J. Polym. Sci. C34, 281-291 (1971).
13. R. T. Graf, J. L. Koenig and H. Ishida, J. Adhesion 16, 97 (1983).
14. H. Ishida and T. Chaisuwan, Polym. Mater Sci. Eng. 85, 534-535 (2001).
15. A. T. DiBenedetto, Mater. Sci. Eng. A302, 74-82 (2001).
16. A. T. DiBenedetto, S. J. Huang, D. Birch, J. Gomez and W. C. Lee, Composite Structures 27, 73-82 (1994).
17. R. Lin, R. P. Quirk, J. Kuang and L. S. Penn, J. Adhesion Sci. Technol. 10, 341-349 (1996).
18. H. J. Barraza, M. J. Hwa, K. Blakely, E. A. O'Rear and B. P. Grady, Langmuir 17, 5288-5296 (2001).
19. H. J. Barraza, K. Olivero, Y. Hamidi, E. A. O'Rear and M. C. Altan, Composite Interfaces (in press).
20. A.-C. Lassas, L. Fagerholm, B. Stenlund and J. Näsman, Polym. Composites 14, 1-6 (1993).
21. H. Fagerholm, C. Lindsjö, J. Rosenholm and K. Rökman, Colloids Surfaces 69, 79-86 (1992).
22. S. Shalaby, D. Clupper and T. Taylor, Patent US No. 5,874,509 (1999).
23. H. Fagerholm, C. Lindsjö and J. Rosenholm, J. Mater. Sci. 30, 2420-2424 (1995).
24. H. Fagerhoim, J. Rosenholm, T. Horr and R. Smart, Colloids Surfaces A 110, 11-22 (1996).
25. G. Funkhouser, M. Arevalo, D. Glatzhofer and E. O'Rear, Langmuir 11, 1443-1447 (1995).
26. D. Glatzhofer, G. Cho, C. Lai, E. O'Rear and B. Fung, Langmuir 9, 2949-2954 (1993).
27. C. Lai, E. O'Rear, J. Harwell and M. Hwa, Langmuir 13, 4267-4272 (1997).
28. B. Kitiyanan, J. O'Haver, J. Harweli and S. Osuwan, Langmuir 12, 2162-2168 (1996).
29. J. O'Haver, J. Reynolds, J. Harwell, B. Grady, L. Evans and W. Waddell, Paper presented at the 219th American Chemical Society Meeting, San Francisco (2000).
30. B. Grady, E. O'Rear, L. Penn and A. Pedicini, Polym. Composites 19, 579-587 (1998).
31. S. Sakhalkar and D. Hirt, Langmuir 11, 3369-3373 (1995).
32. J. Crank, The Mathematics of Diffusion. Oxford University Press, London (1956).
33. A. Avena and A. R. Bunsell, Composites 19, 355-357 (1988).
34. J. L. Thomason, Composites 26, 477-485 (1995).
35. C. Hoppel, T. Bogetti and J. F. Newill, in: Proceedings of the American Society for Composites 15th Technical Conference, O. Ochoa, O'Brien, D. Lagoudas and H. J. Sue (Eds), pp. 1094-1102. Technomics, Lancaster, PA (2000).
36. T. A. Bullions, J. M. Jungk and A. C. Loos, J. Thermoplast. Composite Mater 13, 460-480 (2000).
37. F. U. Buehler and J. C. Seferis, Composites Part A 31, 741-748 (2000).
38. Z. A. Mohd Ishak, A. Ariffin and R. Senawi, Eur Polym. J. 37, 1635-1647 (2001).
39. X. S. Bian, L., Ambrosio, J. M. Kenn, L. Nicolais and A. T. DiBenedetto, Polym. Composites 12, 333-337 (1991).
40. L. Drzal, M. J. Rich and M. F. Koenig, in: Proc. 38th Annual Conf. Reinf Plast. Composites Inst., SPI, 4-F (1983).
41. Department of Defense (DOD) Handbook, Polymer Matrix Composites, MIL-HDBK-17-3E, Vol. 3, pp. 2-25 (1997).
42. L. E. Doxsee, W. Janssens, I. Verpoest and P. de Meester, J. Reinf Plast. Composites. 10, 645-655 (1991).