Design for rolling contact fatigue

International Journal of Powder Metallurgy (Princeton, New Jersey)

Volumn 39, Issue 1, 2003, Pages 33-46

  Lipp, Klaus ^a   Hoffmann, Gottfried ^b  

^a FRAUNHOFER INSTITUTE FOR STRUCTURAL DURABILITY AND SYSTEM RELIABILITY LBF   (Germany)

^b MARQUETTE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CAMSHAFTS; COMPOSITION; FAILURE (MECHANICAL); FATIGUE OF MATERIALS; GEARS; HARDENING; LUBRICATION; SERVICE LIFE; SINTERING; STEEL; STRESS CONCENTRATION; SURFACE TREATMENT;

FAILURE MODES; ROLLING CONTACT FATIGUE DESIGN; SINTER HARDENING; WARM COMPACTING;

POWDER METALLURGY;

EID: 0037278830     PISSN: 08887462     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (60)

1. H. Hertz, "Ueber die Beruehrung Fester Elastischer Koerper.", Gesammelte Werke, Bd.I, Leipzig 1895.
2. D. A. Hills, D. Nowell and A. Sackfield, Mechanics of Elastic Contacts, Butterworth-Heinemann Ltd, Oxford, UK, 1993.
3. P. Somprakit and R. L. Huston, "Contact Stress in Gear Teeth - A New Method of Analysis" NASA, Technical Memorandum 104397, 1991, Technical Report 91-C-001.
4. K. H. Kloos and E. Broszeit, "Grundsaetzliche Betrachtungen zur Oberflaechen-Ermuedung" Zeitschrift fuer Werkstofftechnik/Journal of Materials Technology, 1976, vol. 7, p. 85
5. E. Broszeit, O Zwirlein and J. Adelmann, "Werkstoffanstrengungen im Hertzschen Kontakt -Einfluss von Reibung und Eigenspannungen", Zeitschrift fuer Werkstofftechnik/J. of Mat Technology, 1982, vol. 13, p. 423.
6. D. W. Dudley, Handbook of Practical Gear Design, 1984, McGraw-Hill Book Company, New York, NY.
7. R. J. Drago, Fundamentals of Gear Design, 1988, Butterworth, Boston, MA.
8. G. Niemann and H. Winter, Maschinenelemente, Band II, Springer-Verlag, Heidelberg, 1989.
9. R. S. Zhou, H. S. Cheng and T.Mura "Micropitting in Rolling and Sliding Contact Under Mixed Lubrication", Journal of Tribology, 1989, vol. 111, no. 4, p. 605.
10. B. Rebbechi, F.B. Oswald and D.P. Townsend, "Dynamic Measurement of Gear Tooth Friction and Load", NASA, Technical Memorandum 103281, 1991, Technical Report TR-90-C-023.
11. D. Dawson and G.R. Higginson, Elastohydrodynamic Lubrication, 1966, Pergamon Press, Oxford, UK.
12. A. Ertel-Mohrenstein, "Die Berechnung der Hydrodynamischen Schmierung Gekruemmter Oberflaechen unter hoher Belastung und Relativbewegung", VDI-Fortschrittsberichte, Reihe 1, Nr, 115, 1984.
13. B.-R. Hoehn, K. Michaelis and F. Kopatsch, "Systematic Investigation on the Influence of Viscosity Index Improvers on EHL Film Thickness", Gear Technology, Nov./Dec. 2001, vol. 18, no. 6, p. 30.
14. C. A. Moyer, "Comparing Surface Failure Modes in Bearings and Gears: Appearance versus Mechanisms", American Gear Manufacturers Association, 1991, Technical Paper 91-FTM-6.
15. P. Pan and B. J. Hamrock, "Simple Formulas for Performance Parameters Used in Elastohydrodynamocally Lubricated Line Contacts", Journal of Tribology, 1989, vol. 111, April, p. 246.
16. L.D. Houpert, S. Ioannides, J. Kupers and J. H. Tripp, "The Effect of the EHD Pressure Spike on Rolling Bearing Fatigue", Journal of Tribology, 1987, vol. 111, July, p. 444.
17. D. Dowson, G. R. Higginson and A. V. Whitaker, "Stress Distribution in Lubricated Rolling Contact", Fatigue in Rolling Contact, Symposium Proceedings, Instn. Mechanical Engineers., London, UK, 1963.
18. I. Jubault, J. L. Mansot, P. Vergne and D. Mazuyer, "In-situ Pressure Measurements Using Raman Microspectroscopy in a Rolling Elastohydrodynamic Contact", Journal of Tribology, 2001, vol. 124, January, p. 115.
19. F. Sadeghi and P.C. Sui, "Internal Stresses in Elastohydrodynamic Lubrication of Rolling/Sliding Contact", Journal of Tribology, 1989, vol. 111, January, p. 180.
20. K. Michaelis, "Gear Failures - Definitions, Influence Factors, Rating Methods, Examples" Gear Research Institute, Technical University Munich, Internal Report, 1990.
21. G. Hoffmann, K. Lipp, K. Michaelis, C. M. Sonsino and J. A. Rice, "Testing P/M Materials for High Loading Gear Applications", Int. J. Powder Metall., 1999, vol. 34, no. 6, p. 35.
22. G. Hoffmann and J. A. Rice, Marquette University Milwaukee, private communication, 2002.
23. D. Novell and D.A. Hills, "Hertzian Contact of Ground Surfaces", Journal of Tribology, 1989, vol. 111, January, p. 175.
24. D. M. Bailey, and R. S. Sayles, "Effect of Roughness and Sliding Friction on Contact Stresses" Journal of Tribology, 1991, vol. 113, October, p. 729.
25. J. H. Horng, J. F. Lin and K. Y. Lee, "The Effect of Surface Irregularities on the Tribological Behavior of Steel Rollers Under Rolling-Sliding Contact", Journal of Tribology, 1994, vol. 116, no. 2.
26. J. Kleff and D. Wiedmann, "Neue Wege bei der Waermebehandlung und Oberflaechenbehandlung hochbelasteter Luftfahrt-Getriebebauteile", Haerterei-Technische Mitteilungen, Jahrgang 55, No.1, 2000.
27. K. Lipp, "Oberflaechenzerruettung von Sinterstaehlen unter konstanter und veraenderlicher Hertzscher Pressung mit ueberlagerter Reibung (Schlupf)" 1997, Ph.D. Thesis, Universitaet des Saalandes, Saarbruecken, Germany.
28. P. Jones, K. Buckley-Golder, R. Lawcock and R. Shivanath, "Densification Strategies for High Endurance Powder Metallurgy Components", Int. J. Powder Metall., 1997, vol. 33, no. 3, p. 37.
29. F.J Esper and C.M. Sonsino, Fatigue Design for P/M Components, EPMA, Bellstone, UK, 1994
30. ISO 6336, "Calculation of Load Capacity of Spur and Helical Gears", Part 1 to Part 5, 1996.
31. "Information Sheet - Geometric Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical, and Herringbone Teeth" AGMA, 908-B89, 1995.
32. "Mechanische Pruefung von Schmierstoffen in der FZG-Zahnradverspannungspruefmaschine", DIN 51354, April 1990.
33. T. Hoesel and J. Goebbelet, "Empfehlungen zur Vereinheitlichung von Flankentragfaehigkeitsversuchen an Vergueteten und Gehaerteten Zylinderraedern", FVA-Merkblatt 05, 1979.
34. D. Glover, "A Ball-Rod Rolling Contact Fatigue Tester", Rolling Contact Fatigue Testing of Bearing Steels, ASTM STP 771, edited by J.J.C. Hoo, 1982, p. 107.
35. J.P. Sheehan and M.A.H. Howes, "The Effect of Case Carbon Content and Heat Treatment on the Pitting Fatigue of 8620 Steel", Paper No. 720268, SAE Automotive Engineering Congress, Detroit, Michigan, 1972.
36. M. Bujold, Program Manager Gears, Eaton Corporation, Detroit, Michigan, private communication, 2002.
37. H. Roesch, "Untersuchungen zur Waelzfestigkeit von Rollen - Einfluss von Werkstoff, Waermebehandlung und Schlupf", 1976, Ph.D. Thesis, Technische Universitaet Muenchen, Muenchen, Germany.
38. G. Hoffmann, C.M. Sonsino and K. Michaelis, "Rolling Contact Fatigue - Component Design and Testing for P/M Applications", SAE Technical Papers, SAE 1999-01-0332, 1999.
39. T. Cadle, GKN Germantown, Germantown, Wisconsin, private communication, 2002.
40. H. Winter and H. Roesch, "Einfluss des Schlupfes auf die Waelzfestigkeit von Rollen", Antriebstechnik, 1975, vol. 14, no. 9, p. 505.
41. W. Kaeser, "Beitrag zur Gruebchenbildung an gehaerteten Zahnraedern" 1977, Ph.D. Thesis, Technische Universitaet Muenchen, Muenchen, Germany.
42. K. Hornung, "Zahnraeder aus Bainitischem Gusseisen mit Kugelgraphit", 1983, Ph.D. Thesis, Technische Universitaet Muenchen, Muenchen, Germany.
43. "Tragfaehigkeitsberechnung von Stirnraedern - Dauerfestigkeitswerte und Werkstoffqualitaten", DIN 3990, Teil 5, 1987.
44. K. Lipp, C. M. Sonsino, D. Pohl and W. Brandt, "Rolling Contact Fatigue of Sintered Steels under Hertzian Pressure and Sliding", Powder Metallurgy World Congress, Paris, France, Société Francaise de Métallurgie et de Mat'riaux and European Powder Metallurgy Association, Les Ulis Cedex A, France, 1994, vol. II, p. 831.
45. K. Lipp, C.M. Sonsino, D. Pohl and S. Hock, "Rolling Contact Fatigue Behavior of Sintered Steels - Endurable Hertzian Pressure and Damage Mechanisms", European Powder Metallurgy Conference, Granada, Spain, European Powder Metallurgy Association, Shrewsbury, UK, 1998, vol. 3, p. 143.
46. C.M. Sonsino and K. Lipp, "Rolling Contact Fatigue Properties of Selected P/M-Materials for Gear Box Applications", SAE Technical Papers, SAE 1999-01-0333, 1999.
47. K. Lipp and C.M. Sonsino, "Hochfeste Sinterstaehle", Forschungskoratorium Maschinenbau, Forschungsheft No. 252, Frankfurt/Main, Germany, 2000.
48. BRITE-EuRam-Project, "New Applications and Performance Extensions of Mass Produced Heavy Duty Powder Metallurgy Transmission Components by Warm Compaction", Project-No. BE 96 3052, 1997-2001.
49. C.M. Sonsino, "Concepts and Required Material Data for Fatigue Design of PM Components", European Congress on Powder Metallurgy, Nice, France, edited by European Powder Metallographie Association, Bellstone, UK, 2001, vol. 2, p. 80.
50. H. Steindorf, "Schwing- und Waelzfestigkeitseigenschaften von Sinterstaehlen unter optimierten Festwalzbedingungen", 1991, Ph.D. Thesis, Technical University Darmstadt, Darmstadt, Germany.
51. S. Bengttson and L. Forden, "Rolling Contact Fatigue of Selectively Densified Materials", Advances in Powder Metallurgy & Particulate Materials-2001, compiled by W.B Elsen and S.Kassam, Metal Powder Industries Federation, Princeton, NJ, 2001, part 10, p. 51.
52. H. Winter and M. Simon, "Einfluss von elastohydrodamischen Parametern auf die Gruebchentragfaehigkeit vergueteter Scheiben und Zahnraeder", Konstruktion, 1985, vol. 37, no. 3 and no. 4, p. 93 and 161.
53. K. Lipp, Design of a New and Flexible Gear Test Rig, Fraunhofer Institute for Structural Duarability (LBF), Darmstadt, Germany, private communication, 2002.
54. H. Winter, K. Michaelis and K.V. Schaller, "Betriebsfestigkeitsuntersuchungen zur Gruebchenbildung an einsatzgehaerteten Stirnraedern", Antriebstechnik, 1996, vol. 35, no. 1 and no. 2, p. 37 and 57.
55. B.-R. Hoehn, K. Michaelis and C. Eberspaecher, "Untersuchungen zur nichtlinearen Schaedigung bei der Gruebchenbildung an Zahnflanken", Antriebstechnik, 2001, vol. 40, no. 5 and no. 6, p. 47 and 53.
56. A. Palmgreen, "Die Lebensdauer von Kugellagern", VDI-Z, 1924, vol. 68, no. 4, p. 339.
57. M.A. Miner, "Cumulative Damage in Fatigue", Journal Appl. Mechanics, 1945, vol. 12, no. 3, p. A159.
58. E. Haibach, "Modifizierte lineare Schadensakkumulationshypothese zur Beruecksichtigung des Dauerfestigkeitsabfalls mit fortschreitender Schaedigung" Technical Notes Nr. 50/70, Fraunhofer Institute for Structural Durability (LBF), Darmstadt, Germany.
59. D. Schuetz and H. Lowack, "Zur Verwendung von Bemessungsunterlagen aus Versuchen mit betriebsaehnlichen Lastfolgen zur Lebensdauerabschaetzung", Fraunhofer Institute for Structural Durability (LBF), Darmstadt, Germany, LBF-Bericht No. FB-109, 1976.
60. E. Gassner, "Betriebsfestigkeit - Eine Bemessungsgrundlage fuer Konstruktionsteile mit statistisch wechselnden Beanspruchungen" Konstruktion, 1954, vol. 9, no. 3, p. 97.