Annealing of cold-worked austenitic stainless steels

ISIJ International

Volumn 43, Issue 2, 2003, Pages 135-143

  Padilha, Angelo Fernando ^a   Plaut, Ronald Lesley ^a   Rios, Paulo Rangel ^a,b  

^a UNIVERSITY OF SÃO PAULO   (Brazil)

^b Esc Engenharia Indust/MVR   (Brazil)

Author keywords

Austenitic stainless steels; Grain growth; Recovery; Recrystallization; Texture; Work hardening

Indexed keywords

ANNEALING; AUSTENITIC TRANSFORMATIONS; COLD WORKING; DEFORMATION; GRAIN GROWTH; MARTENSITIC TRANSFORMATIONS; METALLOGRAPHIC MICROSTRUCTURE; PRECIPITATION (CHEMICAL); RECRYSTALLIZATION (METALLURGY); STACKING FAULTS; STRAIN RATE; TEXTURES; THERMOMECHANICAL TREATMENT;

AUSTENITIC STAINLESS STEELS (ASS); INDUCED MARTENSITES;

STAINLESS STEEL;

EID: 0037258323     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.43.135     Document Type: Review

References (82)

1. P. L. Mangonon, Jr. and G. Thomas: Metall. Trans., 1 (1970), 1587.
2. J. E. Spruiell, J. A. Scott, C. S. Ary and R. L. Hardin: Metall. Trans., 4 (1973), 1533.
3. A. S. Grot and J. E. Spruiell: Metall. Trans., 6A (1975), 2023.
4. A. F. Padilha, G. Schanz and K. Anderko: J. Nucl. Mater., 105 (1982), 77.
5. W. Kesternich and D. Meertens: Acta Metall., 34 (1986), 1071.
6. M. Vasudevan, S. Venkadesan and P. V. Sivaprasad: Mater. Sci. Technol., 12 (1996), 338.
7. P. L. Mangonon, Jr. and G. Thomas: Metall. Trans., 1 (1970), 1577.
8. G. B. Olson and M. Cohen: Metall. Trans., 6A (1975), 791.
9. V. Seetharaman and R. Krishnan: J. Mater. Sci., 16 (1981), 523.
10. S. S. Hecker, M. G. Stout, K. P. Staudhamer and J. L. Smith: Metall. Trans., 13A (1982), 619.
11. L. E. Murr, K. P. Staudhamer and S. S. Hecker: Metall. Trans., 13A (1982), 627.
12. M. W. Bowkett, S. R. Keown and D. R. Harries: Met. Sci., 16 (1982), 499.
13. K. P. Staudhamer, L. E. Murr and S. S. Hecker: Acta Metall., 31 (1983), 267.
14. K. Takashima, Y. Higo and S. Numomura: Philos. Mag. A, 49 (1984), 231.
15. Y. Kaieda and A. Oguchi: J. Mater. Sci., 20 (1985), 1847.
16. J. Singh: J. Mater. Sci., 20 (1985), 3157.
17. D. C. Cook: Metall. Trans., 18A (1987), 201.
18. G. L. Huang, D. K. Matlock and G. Krauss: Metall. Trans., 20A (1989), 1239.
19. A. Kumar and L. K. Singhal: Metall. Trans., 19A (1988), 1021.
20. S. K. Varma, J. Kalyanam, L. E. Murr and V. Srinivas: J. Mater. Sci. Lett., 13 (1994), 107.
21. S. G. S. Raman and K. A. Padmanabhan: J. Mater. Sci. Lett., 13 (1994), 389.
22. A. Weiß, X. Fang, H.-J. Eckstein, C. Eckstein and W. Dahl: Steel Res., 66 (1995), 495.
23. J.-Y.Choi and W. Jin: Scr. Mater., 36 (1997), 99.
24. W-S.Lee and C-F. Lin: Scr. Mater., 43 (2000), 777.
25. B. Weiss and R. Stickler: Metall. Trans., 3 (1972), 851.
26. J. K. L. Lai: Mater. Sci. Eng., 58 (1983), 195.
27. R. Ayer, C. F. Klein and C. N. Marzinsky: Metall. Trans., 23A (1992), 2455.
28. R. F. A. Jargelius-Pettersson: Z. Metallkd., 89 (1998), 177.
29. T. Sourmail: Mater. Sci. Technol., 17 (2001 ), 1.
30. A. F. Padilha and P. R. Rios: ISIJ Int., 42 (2002), 325.
31. R. Montanari: Mater. Lett., 10 (1990), 57.
32. C. K. Mukhopadhyay, T. Jayakumar, K. V. Kasiviswanathan and B. Raj: J. Mater. Sci., 30 (1995), 4556.
33. H. Smith and D. R. F. West: J. Materi. Sci., 8 (1973), 1413.
34. K. B. Guy, E. P. Butler and D. R. F. West: Met. Sci., 17 (1983), 167.
35. L. F. M. Martins, R. L. Plaut and A. F. Padilha: ISIJ Int., 38 (1998), 572.
36. S. S. M. Tavares, D. Fruchart and S. Miraglia: J. Alloys Compounds, 307 (2000), 311.
37. V. Randle and A. Brown: Philos. Mag. A, 59 (1989), 1075.
38. A. F. Padilha, J. C. Dutra and V. Randle: Mater. Sci. Technol., 15 (1999), 1009.
39. R. P. Reed: Austenitic Steels at Low Temperatures, ed. by R. P. Reed and T. Horiuchi, Plenum Press, New York, (1983), 41.
40. E. El-Danaf, S. R. Kalidindi and R. D. Doherty: Metall. Mater. Trans., 30A (1999), 1223.
41. L. Rémy, A. Pineau and B. Thomas: Mater. Sci. Eng., 36 (1978), 47.
42. J. M. Silcock, R. W. Rookes and J. Barford: J. Iron Steel Inst., 204 (1966), 623.
43. R. Fawley, M. A. Quader and R. A. Dodd: Trans. Metall. Soc. AIME, 242 (1968), 771.
44. R. E. Schramm and R. P. Reed: Metall. Trans., 6A (1975), 1345.
45. F-E. Teng, B. Yang and Y. Wang: Metall. Trans., 23A (1992), 2859.
46. L. G. Martinez, K. Imakuma and A. F. Padilha: Steel Res., 63 (1992), 221.
47. W. Reick, M. Pohl and A. F. Padilha: Steel Res., 67 (1996), 253.
48. R. P. Reed and R. E. Schramm: J. Appl. Phys., 45 (1974), 4705.
49. S. N. Monteiro and H.-J. Kestenbach: Metall. Trans., 6A (1975), 938.
50. D. J. Dyson and B. Holmes: J. Iron Steel Inst., 208 (1970), 469.
51. G. H. Eichelmann and F. C. Hull: Trans. Am. Soc. Met., 45 (1953), 77.
52. E. P. Butler and M. G. Burke: Acta Metall., 34 (1986), 557.
53. T. Angel: J. Iron Steel Inst., 177 (1954), 165.
54. R. A. Lula: Stainless Steel, American Society for Metals, Ohio, (1989), 23.
55. W. Küpers: Nichtrostende Stähle, 2nd Ed., ed. by H. Ordenbach, Verlag Stahleisen mbH, Düsseldorf, (1989), 139.
56. S. W. Yang and J. E. Spruiell: J. Mater. Sci., 17 (1982), 677.
57. H.-J. Kestenbach: Metall. Trans. A, 8A (1977), 213.
58. F. J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 1st Ed. (reprinted with corrections), Pergamon/Elsevier Science, Oxford, (1996), 235.
59. E. J. Herrera, V. Ramaswamy and D. R. F. West: J. Iron Steel Inst., 211 (1973), 229.
60. M. Vasudevan, S. Venkadesan and P. V. Sivaprasad: J. Nucl. Mater., 231 (1996), 231.
61. T. M. Williams: Recovery and Recrystallisation in type 316 and FV548 austenitic stainless steels, 1st RISØ Int. Symp. on Metallurgy and Materials Science, ed. by N. Hansen, A. R. Jones and T. Leffers, RISØ, Roskilde, Denmark, (1980), 263.
62. A. F. Padilha: Dr.-Ing. thesis, Universität Karlsruhe (TH), Germany, (1981).
63. P. R. Rios: Acta Metall., 35 (1987), 2805.
64. A. J. Lena and W. E. Curry: Irons. Am. Soc. Met., 47 (1955), 193.
65. P. Duhaj, J. Ivan and E. Makovicḱy: J. Iron Steel Inst., 206 (1968), 1245.
66. R. W. Cahn: Physical Metallurgy, 4th Ed., Vol. 3, ed. by R. W. Cahn and P. Haasen, North-Holland, Amsterdam, (1996), 2399.
67. F. Siciliano, Jr., J. C. Dutra, F. C. Pimenta, Jr. and A. F. Padilha: Proc. of the 1st Joint Int. Conf. on Recrystallization and Grain Growth, Vol. 1, Springer-Verlag, Aachen,Germany, (2001), 471.
68. J. K. Stanley and A. J. Perrotta: Metallography, 2 (1969), 349.
69. L. Gavard, F. Montheillet and J. Le Coze: Scr. Mater., 39 (1998), 1095.
70. V. Randle and A. Brown: Philos. Mag. A, 58 (1988), 717.
71. V. Randle: Mater. Sci. Forum, 113-115 (1993), 189.
72. T. Sakai, Y. Saito and K. Kato: Trans. Iron Steel Inst. Jpn., 27 (1987), 520.
73. D. Raabe: J. Mater. Sci., 30 (1995), 47.
74. S. R. Goodman and H. Hu: Trans. Metall. Soc. AIME, 230 (1964), 1413.
75. S. R. Goodman and H. Hu: Trans. Metall. Soc. AIME, 233 (1965), 103.
76. V. I. Yushkov, R. A. Adamescu, Y. S. Machnev, T. M. Gapeka and P. V. Geld: Mater. Sci. Eng., 64 (1984), 157.
77. C. Donadille, R. Valle, P. Dervin and R. Penelle: Acta Metall., 37 (1989), 1547.
78. M. J. Dickson and D. Green: Mater. Sci. Eng., 4 (1969), 304.
79. V. Randle: Mater. Sci. Technol., 6 (1990), 1231.
80. G. Y. Chin: Metals Handbook, Vol. 8: Metallography, Structures and Phase Diagrams, 8th Ed., ed. by M. B. Bever, American Society for Metals, Metals Park, OH, (1973), 229.
81. V. Randle: Acta Mater., 47 (1999), 4187.
82. M. Shimada, H. Kokava, Z. J. Wang, Y. S. Sato and I. Karibe: Acta Mater., 50 (2002), 2331.