A closed-form solution to finite bending of a compressible elastic-perfectly plastic rectangular block

Defence Science Journal

Volumn 53, Issue 1, 2003, Pages 25-39

  Xiao, H ^a   Bruhns, O T ^a   Meyer, A ^a  

^a RUHR UNIVERSITY BOCHUM   (Germany)

Author keywords

Closed form solution; Compressible deformation; Elastic plastic interface; Elasto plastic model; Finite bending; Finite deformation

Indexed keywords

BENDING MOMENTS; COMPRESSIBILITY; ELASTOPLASTICITY; MATHEMATICAL MODELS; SHEET METAL;

COMPRESSIBLE DEFORMATION; ELASTIC PLASTIC INTERFACES; ELASTOPLASTIC MODEL; FINITE BENDING; FINITE DEFORMATION; PLASTIC RECTANGULAR BLOCK;

BENDING (DEFORMATION);

EID: 0037225269     PISSN: 0011748X     EISSN: None     Source Type: Journal    
DOI: 10.14429/dsj.53.2126     Document Type: Article

References (48)

1. Hill, R. The mathematical theory of plasticity, Clarendon Press, Oxford, 1950.
2. Lubahn, J.D. & Sachs, G. Bending of an ideal plastic metal. Trans ASME, 1950, 72, 201-08.
3. Proksa, F. Zur Theorie des plastischen Blechbiegens bei großen Formänderungen. Technische Universität Hannover, 1958. PhD Thesis. (in German)
4. Green, A.P. The plastic yielding of notched bars due to bending. Q. J. Mech. Appl. Math., 1953, 6, 223-39.
5. Green, A.P. The plastic yielding of shallow notched bars due to bending. J. Mech. Phys. Solids, 1956, 6, 259.
6. Liannis, G. & Komoly, T.J. Plastic yielding of a single notched bars due to bending, J. Mech. Phys. Solids, 1958, 7, 1-21.
7. Alexander, J.M. & Komoly, T.J. On the yielding of a rigid/plastic bar with an izod notch. J. Mech. Phys. Solids, 1962, 10, 265-75.
8. Ewing, D.J.F. Calculations on the bending of rigid/plastic notched bars. J. Mech. Phys. Solids, 1968, 16, 205-13.
9. Alexander, D.J.; Lewandowski, J.J.; Sisak, W.J. & Thompson, A.W. Yielding and work-hardening effects in notched bend bars. J. Mech. Phys. Solids, 1986, 34, 433-54.
10. Boer, R.de. Die elastisch-plastische Biegung eines Plattenstreifens aus inkompressiblem Werkstoff bei endlichen Formänderungen. Ing.-Arch., 1967, 36, 145-54. (in German)
11. Boer, R. & Bruhns, O.T. Zur Berechnung der Eigenspannungen bei einem durch endliche Biegung verformten inkompressiblen Plattenstreifen. Acta Mechanica, 1969, 8, 146-59. (in German)
12. Bruhns, O.T. & Thermann, K. Elastisch-plastische Biegung eines Plattenstreifens bei endlichen Formänderungen. Ing.-Arch., 1969, 38, 141-52. (in German)
13. Bruhns, O.T. Die Berücksichtigung einer isotropen Werkstoffverfestigung bei der elastisch-plastischen Blechbiegung mit endlichen Formänderungen. Ing.-Arch., 1970, 39, 63-72.(in German)
14. Bruhns, O. T. Elastoplastische Scheibenbiegung bei endlichen Formanderungen. Z. Angew. Math. Mech., 1971, 51, T101-T103.(in German)
15. Hencky, H. Uber die Form des Elastizitätsgesetzes bei ideal elastischen Stoffen. Z. Techn. Phys., 1928, 9, 215-220
16. Hencky, H. ibidem 457.(in German)
17. Hill, R. Constitutive inequalities for simple materials-i. J. Mech. Phys. Solids, 1968, 16, 229-42.
18. Hill, R. Constitutive inequalities for isotropic elastic solids under finite strain. Proc. Roy. Soc. London, 1970, A 326, 131-47.
19. Hill, R. Aspect of invariance in solid mechanics, Adv. Appl. Mech., 1978, 18, 1-75.
20. Bruhns, O.T.; Xiao, H. & Meyers, A. Self-consistent Eulerian rate-type elastoplasticity models based upon the logarithmic stress rate. Int. J. Plasticity, 1999, 15, 479-420.
21. Xiao, H.; Bruhns, O.T. & Meyers, A. Logarithmic strain, logarithmic spin and logarithmic rate. Acta Mechanica, 1997, 124, 89-105.
22. Hill, R. A general theory of uniqueness and stability in elastic-plastic solids. J. Mech. Phys. Solids, 1958, 6, 336-49.
23. Lehmann, T. Zur Beschreibung großer plastischer Formänderungen unter Berücksichtigung der Werkstoffverfestigung. Rheologica Acta, 1962, 2, 247-54.(in German)
24. Neale, K. Phenomenological constitutive laws in finite plasticity. Solid Mech. Arch., 1981, 6, 79-128.
25. Nemat-Nasser, S. On finite deformation elastoplasticity. Int. J. Solids Struct., 1982, 18, 857-72.
26. Simo, J. C. & Pister, K. S. Remarks on rate constitutive equations for finite deformation problem: computational implications. Compt. Meth. Appl. Mech. Engg., 1984, 46, 201-15.
27. Xiao, H.; Bruhns, O. T. & Meyers, A. Hypoelasticity model based upon the logarithmic stress rate. Journal Elasticity, 1997, 47, 51-68.
28. Xiao, H.; Bruhns, O.T. & Meyers, A. Existence and uniqueness of the integrable-exactly hypoelastic equation τ° = λ(trd)i + 2μd and its significance to finite inelasticity. Acta Mechanica, 1999, 138, 31-50.
29. Xiao, H.; Bruhns, O. T. & Meyers, A. The choice of objective rates in finite elastoplasticity: general results on the uniqueness of the logarithmic rate, Proc. Roy. Soc. London, 2000, A 456, 1865-882.
30. Green, A. & Zerna, E.W. Theoretical elasticity. (Ed 2). Clarendon Press, Oxford, 1960.
31. Ogden, R.W. Non-linear elasticity deformations. Ellis Horwood, Chichester, 1984.
32. Renton, J.D. Pure bending of a solid cone. J. Mech. Phys. Solids, 1997, 45, 753-61.
33. Rivlin, R.S. Large elastic deformations of isotropic materials v. the problem of flexure. Proc. Roy. Soc. London, 1949, A 195, 463-73.
34. Bruhns, O.T.; Xiao, H. & Meyers, A. The hencky model of elasticity: A study on poynting effect and stress response in torsion of tubes and rods. Arch. Mech., 2000, 52, 489-09.
35. Raniecki, B. & Nguyen, H.V. Isotropic elastoplastic solids at finite strain and arbitrary pressure. Arch. Mech., 1984, 36, 687-04.
36. Atluri, S.N. An endochronic approach and other topics in small and finite deformation computational elasto-plasticity. In Finite-element methods for nonlinear problems, edited by P. G. Bergan, K. J. Bathe and W. Wunderlich, Europe-US Symposium, Trondheim, Norway, 1985. pp. 61-74.
37. Bathe, K.; Slavkovic, R. & Kojic, M. On large strain elasto-plastic and creep analysis. In Finite-element methods for nonlinear problems, edited by P. G. Bergan, K. J. Bathe and W. Wunderlich, Europe-US Symposium, Trondheim, Norway, 1985. pp. 75-90.
38. Halleux, J.P. & Donea, J. A discussion of cauchy stress formulations for large strain analysis. In Finite-element methods for nonlinear problems, edited by P. G. Bergan, K. J. Bathe and W. Wunderlich, Europe-US Symposium, Trondheim, Norway, 1985. pp. 175-90.
39. Eterovic, A.L. & Bathe, K.J. A hyperelastic-based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using the logarithmic stress and strain measure. Int. J. Num. Meth. Engg, 1990, 30, 1099-115.
40. Weber, G. & Anand, L. Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids. Compt. Meths. Appl. Mech. Engg., 79.
41. Stumpf, H. & Schieck, B. Theory and analysis of shells undergoing finite elastio-plastic strains and rotations. Acta Mechanica, 1994, 106, 1-21.
42. Schieck, B. & Stumpf, H. The appropriate corotational rate, exact formula for the plastic spin and constitutive model for finite elastoplasticity. Int. J. Solids Struct., 1995, 32, 3643-667.
43. Bonet, J. & Wood, R.D. Nonlinear continuum mechanics for finite element analysis. Cambridge University Press, Cambridge, 1997.
44. Kollmann, F.G. & Sansour, C. Viscoplastic shells: Theory and numerical analysis. Arch. Mech., 1997, 49, 477-11.
45. Anand, L. On H. Hencky's approximate strain-energy function for moderate deformations. J. Appl. Mech., 1979, 46, 78-82.
46. Anand, L. Moderate deformations in extension-torsion of incompressible isotropic elastic materials. J. Mech. Phys. Solids, 1986 34, 293-04.
47. Bruhns, O.T.; Xiao, H. & Meyers, A. A self-consistent euleriall rate type model for finite deformation elastoplasticity with isotropic damage. Int. J. Solids Struct., 2001, 38, 657-83.
48. Bruhns, O.T.; Xiao, H. & Meyers, A. Constitutive inequalities for an isotropic elastic strain energy function based on Hencky's logarithmic strain tensor. Proc. Roy. Soc. London, 2001, A 457, 2207-226.