Hull girder strength

Marine Structures

Volumn 16, Issue 1, 2003, Pages 1-13

  Yao, Tetsuya ^a  

^a OSAKA UNIVERSITY   (Japan)

Author keywords

Buckling plastic collapse; Future research direction; Historical review; Longitudinal bending; Progressive collapse analysis; State of the art; Strength assessment; Structural design; Ultimate hull girder strength

Indexed keywords

BEAMS AND GIRDERS;

HULL GIRDER STRENGTH;

HULLS (SHIP);

HULL; SHIP DESIGN; STRENGTH ASSESSMENT;

HULL; SHIP DESIGN; STRENGTH;

EID: 0037224724     PISSN: 09518339     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0951-8339(02)00052-7     Document Type: Short Survey

References (40)

1. Timoshenko SP. History of strength of materials. New York: McGraw-Hill Book Co, 1953.
2. Rutherford SE, Caldwell JB. Ultimate longitudinal strength of ships: A case study. SNAME Trans 1990;98:441-71.
3. John WG. On the strength of iron ship. Trans Inst Naval Arch 1874;15:74-93.
4. Yao T, et al. Ultimate hull girder strength. Proceedings of the 14th International Ship and Offshore Structures Congress (ISSC). Nagasaki, Japan, 2000. p. 321-91.
5. Hoffmann GH. Analysis of Sir John Biles's experiment on H.M.S. wolf, in the light of Piazker's theory. Trans Inst Naval Arch 1925;67:41-65.
6. Kell CO. Investigation of structural characteristics of destroyers "Preston" and "Bruce". Part 1-Description. SNAME Trans 1931;39:35-64.
7. Kell CO. Investigation of structural characteristics of destroyers "Preston" and "Bruce". Part II-Analysis of data and results. SNAME Trans 1940;48:125-72.
8. Vasta J. Lessons learnt from full-scale ship structural test. SNAME Trans 1958;66:165-243.
9. Lang DW, Warren WG. Structural strength investigation of destroyer Albuera. Trans Inst Naval Arch 1952;94:243-86.
10. Yao T. Analysis of hull girder failure. In: On safety of aged ships. Report of DA-Working Group. Soc Naval Arch Jpn, Ohtsubo, H. (Ed.), 1995. p. 140-6 (in Japanese).
11. Japan Ministry of Transport. Report on the investigation of causes of the casualty of Nakhodka. The committee for the Investigation on causes of the casualty of Nakhodka. 1997.
12. Sugimura T, Nozaki M, Suzuki T. Destructive experiment of ship hull model under longitudinal bending. J Soc Naval Arch Jpn 1966;119:209-20 (in Japanese).
13. Dow RS. Testing and analysis of 1/3-scale welded steel frigate model. Proceedings of the International Conference on Advances in Marine Structures, ARE. Dunfermline. Scotland, 1991. p. 749-73.
14. Endo H, Tanaka Y, Aoki G, Inoue H, Yamamoto Y. Longitudinal strength of the fore body of ships suffering from slamming. J Soc Naval Arch Jpn 1988;163:322-33 (in Japanese).
15. Yao T, Fujikubo M, Yanagihara D, Fujii I, Matrui R, Furui N, Kuwamura Y. Buckling collapse strength of chip carrier under longitudinal bending (1st Report)-collapse test on 1/10-scale hull girder model under pure bending. J Soc Naval Arch Jpn 2002;191:265-74 (in Japanese).
16. Reckling KA. Behaviour of box girders under bending and shear. Proceedings of the ISSC, Paris, France, 1979. p. 11.2.46-9.
17. Ostapenko A. Strength of ship hull girders under moment, shear and torque. Proceedings of the SSC-SNAME Symposium on Extreme Loads Response. Arlington. USA, 1981. p. 149-66.
18. Nishihara S. Analysis of ultimate strength of stiffened rectangular plate (4th Report)-on the ultimate bending moment of ship hull girder. J Soc Naval Arch Jpn 1983;154:367-75 (in Japanese).
19. Mansour AE, Lin YH, Paik JK. Ultimate strength of ships under combined vertical and horizontal moments. Proceedings of the Sixth International Symposium on PRADS. Seoul. Korea, 1995. p. 2.844-51.
20. Caldwell JB. Ultimate longitudinal strength. Trans RINA 1965;107:411-30.
21. Smith CS. Influence of local compressive failure on ultimate longitudinal strength of a ship's hull. Proceedings of the International Symposium on PRADS, Tokyo, Japan, 1977. p. 73-9.
22. Chen KY, Kutt LM, Piaszczyk CM, Bieniek MP. Ultimate strength of ship structures. SNAME Trans 1983;91:149-68.
23. Valsgaard S, Jorgensen L, Boe AA, Thorkildsen H. Ultimate hull girder strength margins and present class requirements. Proceedings of the SNAME Symposium on Marine Structural Inspection. Maintenance and Monitoring, Arlington, USA, 1991. p. B.1-19.
24. Japan Shipbuilding Research Association (JSRA). Investigation into structural safety of aged ships. Report of No. 74 Rule and Regulation Panel, 1999:35-50 (in Japanese).
25. Ueda Y, Rashed SMH. The idealized structural unit method and its application to deep girder structures. Comput Struct 1984;18(2):227-93.
26. Paik JK, Thayamballi AK, Che JS. Ultimate strength of ship hulls under combined vertical bending, horizontal bending and shearing forces. SNAME Trans 1996;104:31-59.
27. Yao T. Ultimate longitudinal strength of ship hull girder; Historical review and state of the art. Int J Offshore Polar Eng 1999;9(1):1-9.
28. Nitta A, Arai H, Magaino A. Basis of IACS unified longitudinal strength standard. Mar Struct 1985;5(1):1-21.
29. Fujikubo M, Kaeding P, Yao T. ISUM rectangular plate element with new lateral shape function (1st Report)-longitudinal and transverse thŕust. J Soc Naval Arch Jpn 2000;187:209-19.
30. Fujikubo M, Kaeding P. ISUM rectangular plate element with new lateral shape function (2nd Report)-stiffened plates under biaxial thrust. J Soc Naval Arch Jpn 2000;188:479-87.
31. Rigo P, Toderan C, Yao T. Sensitivity analysis on ultimate hull bending moment. Proceedings of the Eighth PRADS, Shanghai. China. 2001:987-95.
32. Yao T, Fujikubo M, Khedmati MR. Progressive collapse analysis of a ship's hull girder under longitudinal bending considering local pressure loads. J Soc Naval Arch Jpn 2000;188:507-15.
33. Hu Y, Zhang A, Sun J. Analysis on the ultimate longitudinal strength of a bulk carrier by using a simplified method. Mar Struct 2001;14(3):311-30.
34. Paradillon JY, Quesnel T, Toderan C, Rigo P. Ultimate strength of longitudinally stiffened panels: Multi-criteria comparative analysis. Proceedings of the Eighth PRADS, Shanghai, China, 2001: 1029-35.
35. Ikeda A, Yao T, Kitamura O, Yamamoto M, Yoneda M, Ohtsubo H. Assessment of ultimate longitudinal strength of aged tankers. Proceedings of the Eighth PRADS, Shanghai, China, 2001: 997-1003.
36. Masaoka K, Talavera AL, Tsukamoto Y, Okad H. Ultimate strength and its reliability analysis of ship longitudinal bending using numerical database. J Kansai Soc Naval Arch 2000;233:115-21 (in Japanese).
37. Das PK, Dow RS. Reliability analysis of a naval hull girder under extreme load. Ship Technol Res 2000;47(4):186-96.
38. Sun HH, Bai Y. Ultimate strength and reliability assessment for the ship hull girders used in ISSC-2000 benchmark study. Proceedings of the Eighth PRADS, Shanghai, China, 2001:1005-12.
39. Egorov GV, Kozlyakov VV. An assessment of the ultimate plastic strength of the ship's aged hull. Proceedings of the Eighth PRADS, Shanghai, China, 2001:1013-19.
40. Hu Y, Chen B. Limit state of torsion of ship hulls with large hatch openings. J Ship Res 2001; 45(2):95-102.