Co-vulcanization of acrylonitrile-butadiene rubber and ethylene-propylene-diene rubber blends

KGK-Kautschuk und Gummi Kunststoffe

Volumn 56, Issue 3, 2003, Pages 101-109

  Ghosh, A K ^b   Basu, D K ^a  

^a DEPARTMENT OF MATERIALS SCIENCE   (India)

^b NONE

Author keywords

Bis(diisopropyl) thiophosphoryl disulfide (DIPDIS); Curative diffusion; Filler transfer; NBR EPDM blends; Two stage vulcanization

Indexed keywords

BUTADIENE; ETHYLENE; POLYMER BLENDS; PROPYLENE; VULCANIZATION;

CO-VULCANIZATION;

SYNTHETIC RUBBER;

EID: 0037208011     PISSN: 09483276     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (55)

1. E.T. MoDonel, K.C. Baranwal and J.C. Andies, in "Polymer Blends, Vol. II", D. R. Paul and S. Newman, Eds., Academic Press, New York, 1978, ch. 19.
2. M.H. Walters and D.N. Keyte, Trans. Inst. Rubber Ind., 38 (1962) 40.
3. O. Olabisi, L.M. Robesen and M.T. Shaw, "Polymer-Polymer Miscibility", Academic Press, Inc., New York, 1979.
4. CM Roland, in "Handbook of Elastomers", A. K. Bhowmick and H. L. Stephens, Eds., Marcel Dekker, New York, 1988, ch. 6.
5. P.J. Corish, in "Science and Technology of Rubber", J. E. Mark, B. Erman and F. R. Eirich, Eds., Academic Press, New York, 1994 (2nd Edn.), ch. 12.
6. P.J. Corish, Rubber Chem. Technol., 40 (1967) 324.
7. J. Rehner and P.E. Wei, Rubber Chem. Technol., 42 (1969) 985.
8. G. Kerrutt, H. Blumel and H. Weber, Kautsch. Gummi Kunsts., 22 (1969) 413.
9. J.B. Gardiner, Rubber Chem. Technol., 41 (1968) 1312.
10. J.B. Gardiner, Rubber Chem. Technol., 43 (1970) 370.
11. F.X. Guillaumond, Rubber Chem. Technol., 49 (1976) 105.
12. G.J. van Amerongen, Rubber Chem. Technol., 37 (1964) 1065.
13. W.M. Hess, C.E. Scott and J.E. Callan, Rubber Chem. Technol., 40 (1967) 371.
14. J.E. Callan, W.M. Hess and C.E. Scott, Rubber Chem. Technol., 44 (1971) 814.
15. A.K. Sircar and T.G. Lamond, Rubber Chem. Technol., 46 (1973) 178.
16. W.M. Hess, C.R. Herd and P.C. Vegvari, Rubber Chem. Technol., 66 (1993) 329.
17. C.M. Roland, Rubber Chem. Technol., 62 (1989) 456.
18. R.L. Zapp, Rubber Chem. Technol., 46 (1973) 251.
19. K.C. Baranwal and P.N. Son, Rubber Chem. Technol., 47 (1974) 88.
20. A.J. Tinker, Rubber Chem. Technol., 68 (1995) 461.
21. M.S. Sutton, Rub. World, 62 (1964) 149.
22. E.H. Andrews, J. Appl. Polym. Sci., 10 (1966) 47.
23. F.P. Baldwin and G. Ver Strate, Rubber Chem. Technol., 45 (1972) 709.
24. H. Blumel and G. Kerrutt, Kautsch. Gummi Kunsts., 24 (1971) 517.
25. G. Kerrutt, H. Blumel and H. Weber, Kautsch. Gummi Kunsts., 22 (1969) 413.
26. A.Y. Coran, Rubber Chem. Technol., 61 (1988) 281.
27. V.A. Shershnev, Rubber Chem. Technol., 55 (1982) 537.
28. A.K. Ghosh, S.C. Debnath, N. Naskar and D.K. Basu, J. Appl. Polym. Sci., 81 (4) (2001) 800.
29. A.K. Ghosh and D.K. Basu, J. Appl. Polym. Sci. (in press).
30. A.K. Ghosh and D.K. Basu, (unpublished work).
31. J.R. Payne, RAPRA Mater. Eval. Rep. No. 5, Sheets 9 (1968) 10.
32. R.P. Mastromatteo, J.M. Mitchell and T.J. Brett, Jr., Rubber Chem. echnol., 44 (1971) 1065.
33. W.H. Whittington, J. Inst. Rubber Ind., 9 (1975) 151.
34. M.E. Woods and J.A. Davidson, Rubber Chem. Technol., 49 (1976) 112.
35. J.M. Mitchell, Rubber Chem. Technol., 50 (1977) 430 (abstract).
36. J. Lohmar, Kautsch. Gummi Kunsts., 39 (1986) 1065.
37. D.K. Setua and J.L. White, Kautsch. Gummi Kunsts., 44 (1991) 542.
38. H.-J. Radusch and coworkers, Kautsch. Gummi Kunsts., 46 (1993) 703.
39. M.G. Oliveira, E.G. Soares, C.M.F. Santos, M.F. Diniz and R.C.L. Dutra, Macromol. Rapid Commun., 20(10) (1999) 526.
40. K.P. Sau, T.K. Chaki and D. Khastgir, J. Appl. Polym. Sci., 71(6) (1999) 887.
41. K.P. Sau, T.K. Chaki and D. Khastgir, Rubber Chem. Technol., 73 (2000) 310.
42. M.G. Oliveira and B.G. Scares, J. Appl. Polym. Sci., 82(1) (2001) 38.
43. J.G. Pimblott, G. Scott and J.E. Stuckey, J. Appl. Polym. Sci., 19 (1975) 865.
44. C.R. Parks and R.J. Brown, Rubber Chem. Technol., 49 (1976) 233.
45. J.G. Pimblott, G. Scott and J.E. Stuckey, J. Appl. Polym. Sci., 23 (1979) 3621.
46. N. Naskar, T. Biswas and O.K. Basu, J. Appl. Polym Sci., 52 (1994) 1007.
47. T. Biswas, N. Naskar and D.K. Basu, J. Appl. Polym. Sci., 68 (1995) 981.
48. N. Naskar, S.C. Debnath and D.K. Basu, Rubber Chem. Technol., (in press).
49. S. Kaucharik and M. Pospisil, Sb. Vys. Sk. Chem Technol., S5 (1981) 293.
50. S.K. Mandal, R.N. Datta, P.K. Das and D.K. Basu, J. Appl. Polym. Sci., 36 (1988) 987.
51. S.K. Mandal and D.K. Basu, Rubber Chem. Technol., 67 (1994) 672.
52. W.W. Barbin and M.B. Rodgers, in "Science and Technology of Rubber", J. E. Mark, B. Erman and F. R. Eirich Eds., Academic Press, New York, 1994 (2nd Ed.), ch. 9, p. 438.
53. M.P. Wagner, Rubber Chem. Technol., 49 (1976) 703.
54. K. Hashimoto, T. Harada, I. Ando and N. Okubo, J. Soc. Rubber Ind. Japan 43 (1970) 652.
55. L. Bateman, J.I. Cunneen, C.G. Moore, L. Mullins and A.G. Thomas, in "The Chemistry and Physics of Rubber - Like Substances", L. Bateman Ed., Maclaren and Sons Ltd., London, 1963, Chap. 19, p. 715.