SCOPUS 정보 검색 플랫폼 - 논문 보기

메뉴 건너뛰기

Engineering Fracture Mechanics

Volumn 69, Issue 7, 2002, Pages 793-811

Experimental J estimation equations for single-edge-cracked bars in four-point bend: Homogeneous and bi-material specimens

(1) Kim, Yun Jae a,b

a BRITISH ENERGY GENERATION LTD (United Kingdom)

b Sungkyunkwan University (South Korea)

Author keywords

Finite element analysis; J integral; Plastic factor; Single edge cracked bars in four point bend; Strength mismatch; Toughness testing

Indexed keywords

CRACK INITIATION; ESTIMATION; FINITE ELEMENT METHOD; INTERFACES (MATERIALS); PLASTICS;

INTERFACE CRACKS;

BARS (METAL);

FRACTURE MECHANICS;

EID: 0037192663 PISSN: 00137944 EISSN: None Source Type: Journal
DOI: 10.1016/S0013-7944(01)00125-4 Document Type: Article

Times cited : (26)

References (27)

1
- 2042425024
- ASTM Standard, E 1739-96 Annual Book of ASTM Standards, section 3
- Standard Test Method for J Integral Characterisation of Fracture Toughness , vol.3 , Issue.1 , pp. 957-980

2
- 2042420997
- ASTM Standard, E 1820-96. Annual Book of ASTM Standards, section 3
- Standard Test Method for Measurement of Fracture Toughness , vol.3 , Issue.1 , pp. 981-1013

3
- 2042531274
- tC of metallic materials: British Standard BS 7448-1991
- British Standard BS 5447-1977. British Standards Institution, London
- Fracture Mechanics Toughness Tests

4
- 2042490774
- ISO CD 12135: (Draft-rev 3)
- (1997) Unified Method of Test for the Determination of Quasistatic Fracture Toughness

5
- 0003677155
- ESIS P1-92. ESIS P2-92. ESIS recommendations for determining the fracture behaviour of materials. 1992
- (1992) ESIS Recommendations for Determining the Fracture Resistance of Ductile Materials

6
- 0027627221
- J and CTOD estimation equations for shallow cracks in single edge notch bend specimens
- (1993) J Testing Evaluation , vol.21 , pp. 228-238
- Kirk, M.T.¹ Dodds, R.H.²

7
- 0003338663
- The limits of applicability of J and CTOD estimation procedures for shallow-cracked SENB specimens
- Dawes MG. editor. The welding Institute, Abington, Cambridge
- (1992) Shallow Crack Fracture Mechanics, Toughness Test and Applications
- Wang, Y.-Y.¹ Gordon, J.R.²

8
- 0002877821
- On the sensitivity of J estimation to materials' stress strain curves in fracture toughness testing using the finite element method
- (2001) J Testing Evaluation , vol.29 , Issue.1 , pp. 18-30
- Kim, Y.-J.¹ Schwalbe, K.-H.²

9
- 0008846108
- On experimental J estimation equations based on CMOD for SE(B) specimens
- (2001) J Testing Evaluation , vol.29 , Issue.1 , pp. 67-71
- Kim Y.-J¹ Schwalbe, K.-H.²

10
- 0027188271
- Constraint and toughness parameterised by T
- Hackett EM, Schwalbe K-H, Dodds R-H, editors. ASTM STP 1171, American Society for Testing and Materials, Philadelphia
- (1993) Constraint Effect in Fracture , pp. 21-40
- Hancock, J.W.¹ Reuter, W.G.² Parks, D.M.³

11
- 0027306315
- Effects of crack depth and mode of loading on the J-R curve behaviour of a high-strength steel
- Hackett EM, Schwalbe K-H, Dodds R-H, editors. ASTM STP 1171, American Society for Testing and Materials, Philadelphia
- (1993) Constraint Effect in Fracture , pp. 239-263
- Joyce, J.A.¹ Hackett, E.M.² Roe, C.³

12
- 0027539341
- pl development in precracked specimen test results
- (1993) Int J Fract , vol.59 , pp. 213-226
- Sharobeam, M.H.¹ Landes, J.D.²

13
- 0024016036
- Slip line field solutions for three-point notch bend specimens
- (1988) Int J Fract , vol.37 , pp. 13-29
- Wu, S.-X.¹ Cotterell, B.² Mai, Y.-W.³

14
- 0025480391
- p) of fracture specimens with deep and shallow cracks
- (1990) Int J Fract , vol.45 , pp. 1-18
- Wu, S.-X.¹ Mai, Y.-W.² Contterell, B.³

15
- 85040265963
- An engineering approach for elastic-plastic fracture analysis
- (1981) EPRI, Final Report to NP 1931
- Kumar, V.¹ German, M.D.² Shih, C.F.³

16
- 0023565052
- c determination for shallow notch welded bend specimens
- (1987) Fatigue Fract Eng Mater Struct , vol.10 , pp. 479-493
- Sumpter, J.D.G.¹

17
- 0003494025
- version 5.8. Hibbit. Karlsson & Sorensen. Pawtucket RI
- (1998) Abaqus Standard/User's Manual

18
- 0003131579
- Fully plastic crack tip fields in plane strain shallow-cracked specimens under pure bending
- (1996) Int J Fract , vol.78 , pp. 21-34
- Kim, Y.-J.¹ Lin, G.² Cornec, A.³ Schwalbe, K.-H.⁴

19
- 2042522181
- Analyses of Bi-material specimens at full yielding: Part I-plane strain single edge cracked specimens under pure bending
- GKSS Research Centre, Germany
- (1994) Technical Note GKSS/WAW/94/11
- Kim, Y.-J.¹ Lin, G.² Cornec, A.³ Schwalbe, K.-H.⁴

20
- 0023855906
- Review of limit loads of structures containing defects
- (1988) Int J Pressure Vessels Piping , vol.32 , pp. 191-327
- Miller, A.G.¹

21
- 0027672527
- Fully plastic analyses for plane strain single edge cracked specimens subject to combined bending and tension
- (1995) Int J Fract , vol.63 , pp. 329-349
- Lee, H.¹ Parks, D.M.²

22
- 0000132428
- Initial plastic yielding in notch bend tests
- (1956) J Mech Phys Solids , vol.4 , pp. 128-144
- Green, A.P.¹ Hundy, B.B.²

23
- 0004067658
- Amsterdam: North-Holland
- (1971) Foundation of the Theory of Plasticity
- Kachanov, L.M.¹

24
- 0023979063
- Elastic fracture mechanics concepts for interfacial cracks
- (1988) J Appl Mech , vol.55 , pp. 98-103
- Rice, J.R.¹

25
- 0004019913
- St. Louis, Missouri: Paris Production
- (1985) The Stress Analysis of Cracks Handbook
- Tada, H.¹ Paris, P.² Irwin, G.³

26
- 0035241975
- Mismatch effects on plastic yields loads in idealised weldments: Part II-HAZ cracks
- (2001) Eng Fract Mech , vol.68 , Issue.2 , pp. 183-200
- Kim, Y.-J.¹ Schwalbe, K.-H.²

27
- 2042500779
- in preparation
- Plastic η Factor Solutions for Strength Mismatched Specimens with HAZ Cracks
- Kim, Y.-J.¹

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.