Experimental and numerical study of heat transfer in a gas turbine combustor liner

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI

Volumn 3 A, Issue , 2002, Pages 187-197

  Bailey, Jeremy C ^a   Tolpadi, Anil K ^b   Intile, John ^b   Fric, Thomas F ^b   Nirmalan, Nirm V ^a   Bunker, Ronald S ^a  

^a GE GLOBAL RESEARCH   (United States)

^b GE ENERGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

GAS TURBINE COMBUSTOR LINER; IMPINGEMENT JET;

CALCULATIONS; COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; GAS TURBINES; HEAT TRANSFER COEFFICIENTS; JETS; MATHEMATICAL MODELS; REYNOLDS NUMBER; TURBULENCE; VELOCITY;

HEAT TRANSFER;

EID: 0037003677     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2002-30183     Document Type: Conference Paper

References (29)

1. Chin, J., Skirvin, S., Hayes, L., and Burggraf, F., 1961, "Film Cooling with Multiple Slots and Louvers - Part 1: Multiple Continuous Slots", Journal of Heat Transfer, Vol. 83, pp. 281-286.
2. Crawford, M., Kays, W., and Moffat, R., 1980, "Full-Coverage Film Cooling Part 1: Comparison of Heat Transfer Data for Three Injection Angles", Journal of Engineering for Power, Vol. 102, pp. 1000-1005.
3. Metzger, D.E., Takeuchi, D., and Kuenstler, P., 1973, "Effectiveness and Heat Transfer with Full-Coverage Film Cooling", Journal of Engineering for Power, Vol. 95, pp. 180-184.
4. Andrews, G.E., Al Dabagh, A.M., Asere, A.A., Bazdidi-Tehrani, F., Mkpadi, M.C., and Nazari, A., 1992, "Impingement/Effusion Cooling", AGARD CP-527, Heat Transfer and Cooling in Gas Turbines, Paper Number 30.
5. Andrews, G.E., Khalifa, I.M., Asere, A.A., Bazdidi-Tehrani, F., 1995, "Full Coverage Effusion Film Cooling with Inclined Holes", Paper 95-GT-274, IGTI Turbo Expo, Houston.
6. Al Dabagh, A.M., Andrews, G.E., Abdul Husain, R.A.A., Husain, C.I., Nazari, A., and Wu, J., 1990, "Impingement/Effusion Cooling: The influence of the Number of Impingement Holes and Pressure Loss on the Heat Transfer Coefficient", Journal of Turbomachinery, Vol. 112, pp. 467-476.
7. Martiny, M., Schulz, A., and Wittig, S., 1995, "Full-Coverage Film Cooling Investigations: Adiabatic Wall Temperatures and Flow Visualization", Paper 95-WA/HT-4, ASME Int. Mech. Engr. Congress, San Francisco.
8. Martiny, M., Schulz, A., and Wittig, S., 1997, "Mathematical Model Describing the Coupled Heat Transfer in Effusion Cooled Combustor Walls", Paper 97-GT-329, IGTI Turbo Expo, Orlando.
9. Fric, T.F., Campbell, R.P., and Rettig, M.G., 1997, "Quantitative Visualization of Full-Coverage Discrete-Hole Film Cooling", Paper 97-GT-328, IGTI Turbo Expo, Orlando.
10. Schulz, A., 2001, "Combustor Liner Cooling Technology in Scope of Reduced Pollutant Formation and Rising Thermal Efficiencies", in Heat Transfer in Gas Turbine Systems, Annals of the New York Academy of Sciences, Vol. 934, pp. 135-146.
11. Martin, H., 1977, "Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces", in Advances in Heat Transfer, Academic Press, Vol. 13, pp. 1-60.
12. Metzger, D. and Korstad, R., 1972, "Effects of Crossflow on Impingement Heat Transfer", Journal of Engineering for Power, Vol. 94, pp. 35-41.
13. Kercher, D. and Tabakoff, W., 1970, "Heat Transfer by a Square Array of Round Air Jets Impinging Perpendicular to a Flat Surface Including the Effect of Spent Air", Journal of Engineering for Power, Vol. 92, pp. 73-82.
14. Florschuetz, L., Truman, C., and Metzger, D., 1981, "Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement with Crossflow", Journal of Heat Transfer, Vol. 103, pp. 337-342.
15. Florschuetz, L., Berry, R., and Metzger, D., 1980, "Periodic Streamwise Variations of Heat Transfer Coefficients for Inline and Staggered Arrays of Circular Jets with Crossflow of Spent Air", Journal of Heat Transfer, Vol. 102, pp. 132-137.
16. Florschuetz, L., Metzger, D., and Su, C., 1984, "Heat Transfer Characteristics for Jet Array Impingement with Initial Crossflow", Journal of Heat Transfer, Vol. 106, pp. 34-41.
17. Webb, R.L., Eckert, E.R.G., and Goldstein, R.J., 1971, "Heat Transfer and Friction in Tubes with Repeated-Rib Roughness", Int. Journal of Heat and Mass Transfer, Vol. 14, pp. 601-617.
18. Burggraf, F., 1970, "Experimental Heat Transfer and Pressure Drop with Two-Dimensional Turbulence Promoter Applied to Two opposite Walls of a Square Tube", in Augmentation of Convective Heat and Mass Transfer, Eds. Bergles and Webb, ASME, pp. 70-79.
19. Han, J.C., Glicksman, L.R., and Rohsenow, W.M., 1978, "An Investigation of Heat Transfer and Friction for Rib-Roughened Surfaces", Int. Journal of Heat and Mass Transfer, Vol. 21, pp. 1143-1156.
20. Han, J.C., Park, J.S., and Lei, C.K., 1984, "Heat Transfer Enhancement in Channels with Turbulence Promoters", Paper No. 84-WA/HT-72, ASME.
21. Ferrara, G., Innocenti, L., Migliorini, G., Facchini, B., and Dean, A.J., 2000, "Heat Transfer Analysis in a Modern DLN Combustor", Paper 2000-GT-254, IGTI Turbo Expo, Munich.
22. Smith, K. and Fahme, A., 1999, "Backside Cooled Combustor Liner for Lean-Premixed Combustion", Paper No. 99-GT-239, IGTI Turbo Expo, Indianapolis.
23. x/CO Combustion System for "F" Class Industrial Gas Turbines", Journal of Engineering for Gas Turbines and Power, Vol. 123, pp. 317-323.
24. Farina, D.J., Hacker, J.M., Moffat, R.J., and Eaton, J.K., 1994, "Illuminant Invariant Calibration of Thermochromic Liquid Crystals", Experimental Thermal and Fluid Science, Vol. 9, pp. 1-9.
25. Kline and McClintock, 1953, "Describing Uncertainties in Single-Sample Experiments", Mechanical Engineering, January 1953.
26. Launder, B.E. and Spalding, D.B., 1974, "The Numerical Computation of Turbulent Flows", Computational Methods in Applied Mechanics and Engineering, Vol. 3, pp. 269-289.
27. Norris, L.H. and Reynolds, W.C., 1975, "Turbulent Channel Flow with a Moving Wavy Boundary", Report No. FM-10, Dept. of Mechanical Engineering, Stanford University, USA
28. STARCD, version 3.1B manual, 2001.
29. Perry, K.P., 1954, "Heat Transfer by Convection from a Hot Gas Jet to a Plane Surface", Proc. Inst. of Mech. Eng., London, Vol. 168.