Backward traveling rotating stall waves in centrifugal compressors

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI

Volumn 5 A, Issue , 2002, Pages 529-543

  Spakovszky, Z S ^a  

^a Massachusetts Institute of Technology   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CENTRIFUGAL COMPRESSORS; ROTATING STALL WAVES;

DIFFUSERS (FLUID); ROTATION; ROTORS; SPEED CONTROL;

COMPRESSORS;

EID: 0036998269     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2002-30379     Document Type: Conference Paper

References (30)

1. Abdelhamid, A., 1980. "Analysis of Rotating Stall in Vaneless Diffusers of Centrifugal Compressors." In ASME Turbo Expo, New Orleans, LA, Paper 80-GT-184.
2. Berndt, R.G., 1995. Actuation for Rotating Stall Control of High Speed Compressors. Master's thesis, Department of Aeronautics and Astronautics, MIT.
3. Dawes W., 1995. "A Simulation of the Unsteady Interaction of a Centrifugal Impeller With Its Vaned Diffuser: Flow Analysis." ASME J. of Turbomachinary, vol. 117 pp. 213-222.
4. Felsing G. and Moller P., 1969. "Coanda Flow over a Circular Cylinder with Injection Normal to the Surface." AIAA Journal, vol. 7, 5 pp. 842-846.
5. Ffowcs Williams J., Harper M., and D.J. A., 1993. "Active Stabilization of Compressor Instability and Surge in a Working Engine." ASME J. of Turbomachinary, vol. 115 pp. 68-75.
6. Frigne P. and Van Den Braembussche R., 1980. "A Theoretical Model For Rotating Stall in the Vaneless Diffuser of a Centrifugal Compressor." In ASME Turbo Expo, Amsterdam, The Netherlands. Paper 84-GT-204.
7. Frigne P. and Van Den Braembussche R., 1984. "Distinction Between Different Types of Impeller and Diffuser Rotating Stall in a Centrifugal Compressor With Vaneless Diffuser." ASME J. of Engineering for Gas Turbines and Power, vol. 106 pp. 468-474.
8. Greitzer E., 1976. "Surge and Rotating Stall in Axial Compressors; Part I: Theoretical Compression System Model." ASME J. of Engineering for Power, vol. 98 pp. 190-198.
9. Gysling D., Dugundji J., Greitzer E., and Epstein A., 1991. "Dynamic Control of Centrifugal Compressor Surge Using Tailored Structures." ASME J. of Turbomachinary, vol. 113, 4 pp. 710-722.
10. Hunziker R. and Gyarmathy G., 1994. "The Operational Stability of a Centrifugal Compressor and Its Dependence on the Characteristics of the Subcomponents." ASME J. of Turbomachinary, vol. 116 pp. 250-259.
11. Larosiliere L., Skoch G., and Prahst P., 1997. "Aerodynamic Synthesis of a Centrifugal Impeller Using CFD and Measurements." In AIAA, ASME, SAE and ASEE Joint Propulsion Conference, Seattle, WA.
12. Lawless P. and Fleeter S., 1991. "Active Unsteady Aerodynamic Suppression of Rotating Stall in an Incompressible Flow Centrifugal Compressor With Vaned Diffuser." In AIAA/SAE/ASME/ASEE 27th Joint Propulsion Conference, Paper AIAA-91-1898.
13. Lawless P. and Fleeter S., 1993. "Rotating Stall Acoustic Signature in a Low-Speed Centrifugal Compressor: Part II - Vaned Diffuser." In ASME Turbo Expo, Cincinnati, Ohio. Paper 93-GT-254, vol. 1993.
14. Lawless P. and Fleeter S., 1995. "Rotating Stall Acoustic Signature in a Low-Speed Centrifugal Compressor: Part I - Vaneless Diffuser." ASME J. of Turbomachinary, vol. 1995 pp. 87-96.
15. Longley J., 1994. "A Review of Nonsteady Flow Models for Compressor Stability." ASME J. of Turbomachinary pp. 202-215.
16. McKain T. and Holbrook G., 1997. "Coordinates for a High Performance 4:1 Pressure Ratio Centrifugal Compressor." Tech. Rep. CR-204134, NASA.
17. Moore F. and Greitzer E., 1986. "A Theory of Post-Stall Transients in Axial Compressors: Part I - Development of the Equations." ASME J. of Engineering for Gas Turbines and Power, vol. 108 pp. 68-76.
18. Nelson E., Paduano J., and Epstein A., 2000. "Active Stabilization of Surge in an Axicentrifugal Turboshaft Engine." ASME J. of Turbomachinary, vol. 122 pp. 485-493.
19. Oakes W., Lawless P., and Fleeter S., 1999. "Instability Pathology of a High Speed Centrifugal Compressor." In ASME Turbo Expo, Indianapolis, Indiana. Paper 99-GT-415, vol. 1999.
20. Pinsley J., Guenette G., Epstein A., and Greitzer E., 1991. "Active Stabilization of Centrifugal Compressor Surge." ASME J. of Turbomachinary, vol. 113 pp. 723-732.
21. Rodgers C., 1982. "The Performance of Centrifugal Compressor Channel Diffusers." In ASME Turbo Expo, Paper 82-GT-10.
22. Senoo Y., Kinoshita Y., and Ishida M., 1977. "Asymmetric Flow in Vaneless Diffusers of Centrifugal Blowers." ASME J. of Fluids Engineering, vol. 99 pp. 104-114.
23. Skoch G., Prahst P., Wernet M., Wood J., and Strazisar A., 1997. "Laser Anemometer Measurements of the Flow Field in a 4:1 Pressure Ratio Centrifugal Impeller." In ASME Turbo Expo, Orlando, FL.
24. Spakovszky Z., 2000. Applications of Axial and Radial Compressor Dynamic System Modeling. Ph.D. thesis, Department of Aeronautics and Astronautics, MIT.
25. Stein A., Niazi S., and Sankar L., 2000. "Computational Analysis of Centrifugal Compressor Surge Control Using Air Injection." In AIAA, Paper 2000-3501.
26. Stenning A., 1980. "Rotating Stall and Surge." ASME J. of Fluids Engineering, vol. 102 pp. 14-20.
27. Strazisar A., 2000. Personal communication, NASA Glenn Research Center.
28. Suder K., Hathaway M., Thorp S., Strazisar A., and Bright M., 2000. "Compressor Stability Enhancement Using Discrete Tip Injection." In ASME Turbo Expo, Munich, Germany.
29. Wernet M., Bright M., and Skoch G., 2001. "An Investigation of Surge in a High-Speed Centrifugal Compressor Using Digital PIV." ASME J. of Turbomachinary, vol. 123 pp. 418-428.
30. Wood J., 2000. Personal communication, NASA Glenn Research Center.