ICAS-GT: A European collaborative research programme on internal cooling air systems for gas turbines

American Society of Mechanical Engineers, International Gas Turbine Institute, Turbo Expo (Publication) IGTI

Volumn 3 B, Issue , 2002, Pages 907-914

  Smout, Peter D ^a   Chew, John W ^b   Childs, Peter R N ^c  

^a ROLLS ROYCE PLC   (United Kingdom)

^b UNIVERSITY OF SURREY   (United Kingdom)

^c UNIVERSITY OF SUSSEX   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

INTERNAL COOLING AIR SYSTEMS; ROTATING CAVITY FLOW;

COMPUTATIONAL FLUID DYNAMICS; COOLING SYSTEMS; FINITE ELEMENT METHOD; HEAT TRANSFER; PRESSURE; TEMPERATURE;

GAS TURBINES;

EID: 0036991574     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/GT2002-30479     Document Type: Conference Paper

References (28)

1. Alexiou, A., Long, C.A., Turner, A.B. and Barnes, C.J., 2001, "Thermal Modeling of a Rotating Cavity Rig to Simulate the Internal Air System of a Gas Turbine HP Compressor," 5th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics.
2. Bayley, F.J., Long, C.A. and Turner, A.B., 1993, "Discs and Drums; The Thermo-Fluid Dynamics of Rotating Surfaces," I.Mech.E., J.Mech. Eng. Sci., Vol. 207, pp 73-81.
3. Bayley, F.J. and Childs, P.R.N., 1994, "Air Temperature Rises in Compressor and Turbine Stator Wells," ASME 94-GT-0185.
4. Bohn, D.E., Ma, H., Rudzinski, B. and Bonhoff, B., 2002, "Experimental Investigation of the Influence of Rim Seal Geometry on Hot Gas Ingestion in to the Downstream Cavity of an Axial Turbine Stage," ASME 2002.
5. Burkhardt, C., Mayer, A. and Reile, E., 1993, "Transient Thermal Behaviour of a Compressor Rotor with Axial Cooling Air Flow and Co-rotating or Contra-rotating Shaft," AGARD CP527, pp 21.1-21.9.
6. Chew J., 1990, "Prediction of Rotating Disc Flow and Heat Transfer in Gas Turbine Engines," Proc.3rd Int. Symp. Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, April 1990.
7. Chew J.W., Dadkah S. and Turner A.B., 1991, "Rim Sealing of Rotor-Stator Wheelspaces in the Absence of External Flow," ASME Paper 91-GT-0033, (also ASME J. Turbomachinery, vol. 114, pp 433-438).
8. Chew, J.W., Green, T. and Turner, A.B., 1994, "Rim Sealing in the Presence of External Flow," ASME 94-GT-0126.
9. Demargne, A.A.J. and Longley, J.P., 2000, "The Aerodynamic Interaction of Stator Shroud Leakage and Mainstream Flows in Compressors," ASME 2000-GT-0570.
10. Dittmann, M., Geis, T., Schramm, V., Kim, S. and Wittig, S., 2001, "Discharge Coefficients of a Pre-Swirl System in Secondary Air Systems," ASME 2001-GT-0122.
11. Farthing, P.R., Long, C.A., Owen, J.M. and Pincombe, J.R., 1992a, "Rotating Cavity with Axial Throughflow of Cooling Air: Flow Structure," ASME J. Turbomachinery vol. 114, pp 237-246.
12. Farthing, P.R., Long, C.A., Owen, J.M. and Pincombe, J.R., 1992b, "Rotating Cavity with Axial Throughflow of Cooling Air: Heat Transfer," ASME J. Turbomachinery vol. 114, pp 229-236.
13. Hamabe, K. and Ishida, K., 1992, "Rim Seal Experiments and Analysis of a Rotor-Stator System with Non-Axisymmetric Main Flow," ASME 92-GT-0160.
14. Heidegger, N.J., Hall, E.J. and Delaney, R.A., 1996, "Parameterized Study of High-Speed Compressor Seal Cavity Flow," AIAA 96-2807.
15. Hills, N.J., Chew, J.W. and Turner, A.B., 2001, "Computational and Mathematical Modelling of Turbine Rim Seal Ingestion," ASME 2001-GT-0204.
16. Johnson, B.V., Mack, G.J., Paolillo, R.E. and Daniels, W.A., 1994, "Turbine Rim Seal Gas Path Flow Ingestion Mechanisms," AIAA 940-2703. Presented at the 30th Joint Propulsion Conference.
17. Kais, G., 1998, "Heat Transfer and Fluid Flow in the High Pressure Compressor Drive Cone Cavity of an Aero-engine," DPhil Thesis, University of Sussex.
18. Long, C.A., Turner, A.B., Kais, G., Tham, K.M. and Verdicchio, J.A., 2002, "Measurement and CFD Prediction of the Flow within an H.P. Compressor Drive Cone," ASME 2002.
19. May, N.E, Chew, J.W. and James, P.W., 1994, "Calculation of Turbulent Flow for an Enclosed Rotating Cone," ASME J. Turbomachinery, 116, pp 548-554.
20. Monico, R.D. and Chew, J.W., 1992, "Modelling Thermal Behaviour of Turbomachinery Discs and Casings," AGARD-CP-527.
21. Owen, J.M. and Rogers, R.H., 1989, "Flow and Heat Transfer in Rotating Disc Systems," Research Studies Press, Taunton, (John Wiley, New York).
22. Owen, J.M. and Rogers, R.H., 1995, "Flow and Heat Transfer in Rotating Disc Systems, Vol.2: Rotating Cavities," Research Studies Press, Taunton, (John Wiley, New York).
23. Scott, R.M, Childs, P.R.N, Hills, N.J. and Millward, J.A., 2000, "Radial Inflow into the Downstream Cavity of a Compressor Stator Well," ASME 2000-GT-0507
24. Verdicchio, J.A., 2001, "The Validation and Coupling of Computational Fluid Dynamics and Finite Element Codes for Solving Industrial Problems," Thesis submitted for examination. University of Sussex, Brighton, U.K.
25. Verdicchio, J.A., Chew, J.W. and Hills, N.J., 2001, "Coupled Fluid / Solid Heat Transfer Computation for Turbine Discs," ASME 2001-GT-0205.
26. Virr G.P., Chew J.W. and Coupland J., 1993, "Application of Computational Fluid Dynamics to Turbine Disc Cavities," ASME J. of Turbomachinery, Vol. 116, pp 701 - 708.
27. Wellborn, S.R. and Okiishi, T.H., (1996), "Effects of Shrouded Stator Cavity Flows on Multi-stage Axial Compressor Aerodynamic Performance," NASA Contractor Report 198536.
28. Yamada, Y. and Ito, M., 1979, "Frictional Resistance of Enclosed Rotating Cones with Superposed Throughflow," J. Fluids Engineering, 101, 259.