Inclusion formation and microstructure evolution in low alloy steel welds

ISIJ International

Volumn 42, Issue 12 SPEC., 2002, Pages 1344-1353

  Babu, S S ^a   David, S A ^a  

^a OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

Acicular ferrite; Bainite; Inclusion formation; Nonequilibrium phase transformations; Steel welds; Weld solidification

Indexed keywords

BAINITE; FERRITE; INCLUSIONS; NITRIDES; OXIDES; SOLIDIFICATION; STEEL; TITANIUM; X RAY DIFFRACTION ANALYSIS;

COMPUTATIONAL THERMODYNAMICS; INCLUSION FORMATION; LOW ALLOY STEEL WELDS; NONEQUILIBRIUM AUSTENITE PHASE SELECTION; SOLID-STATE TRANSFORMATIONS; WELD SOLIDIFICATION;

WELDS;

EID: 0036990660     PISSN: 09151559     EISSN: None     Source Type: Journal    
DOI: 10.2355/isijinternational.42.1344     Document Type: Review

References (73)

1. A. Belyakov, Y. Sakai, T. Hara, Y. Kimura, and K. Tsuzaki: Scr. Mater., 45 (2001), 1213.
2. S. Takaki, K. Kawasaki, and Y. Kimura: J. Mater. Process. Technol., 117 (2001), 359.
3. F. G. Caballero, H. K. D. H. Bhadeshia, K. J. A. Mawella, D. G. Jones and P. Brown: Mater. Sci. Technol., 18 (2002), 279.
4. C. Ouchi: ISIJ Int., 41 (2001), 542.
5. A. Ali and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 7 (1991), 895.
6. S. S. Babu: Ph. D. Thesis, University of Cambridge, UK, (1992).
7. R. E. Dolby: Proc. Int. Conf. on Advances in the Physical Metallurgy and Applications of Steel, The Metals Society, London, (1981), 111.
8. G. M. Evans and N. Bailey: Metallurgy of Basic Weld Metal, Avington Publishing, Cambridge, UK, (1997).
9. D. J. Abson and R. J. Pargeter: Int. Met. Rev., 31 (1986), 141.
10. O. Grong and D. K. Matlock: Int. Met. Rev., 31 (1986), 27.
11. Y. Ito and M. Nakanishi: Sumitomo Search, 15 (1976), 42.
12. S. Liu and D. Olson: Weld. J., 65 (1986), 139s.
13. Z. Zhang and R. A. Farrar: Mater. Sci. Technol., 12 (1996), 237.
14. G. Thewlis: Mater. Sci. Technol., 10 (1994), 110.
15. G. Thewlis, J. A. Whiteman and D. J. Senogles: Mater. Sci. Technol., 13 (1997), 257.
16. O. Grong, A. O. Kluken, H. K. Nylund, A. L. Dons and J. Hjelen: Metall. Mater. Trans. A, 26A (1995), 525.
17. Y. Hori, K. Ichikawa, S. Ohkita, S. Funaki, and N. Yurioka: Q. J. Jpn. Weld. Soc., 13 (1995), 500.
18. J. M. Gregg and H. K. D. H. Bhadeshia: Metall. Mater. Trans. A, 25A (1994), 1603.
19. J. M. Gregg and H. K. D. H. Bhadeshia: Acta Metall. Mater., 42 (1994), 3321.
20. S. Zhang, N. Hattori, M. Enomoto and T. Tarui: ISIJ Int., 36 (1996), 1301.
21. T. Lee, H. J. Kim, B. Y. Kang and S. K. Hwang: ISIJ Int., 40 (2000), 1260.
22. S. Chatterjee and N. S. Mishra: Steel Res., 65 (1994), 138.
23. F. Ishikawa, T. Takahashi and T. Ochi: Solid → Solid Phase Transformations, ed. by W. C. Johnson, J. M. Howe, D. E. Laughlin and W. A. Soffa, The Minerals, Metals and Materials Society, Warrendale, PA, (1994), 171.
24. J. Lee: Acta Metall. Mater., 42 (1994), 3291.
25. I. Madriaga and I. Gutierrez: Acta Mater., 47 (1999), 951.
26. I. Madriaga, J. L. Romero and I. Gutierrez: Metall. Mater. Trans. A, 29A (1998), 1003.
27. S. S. Babu, S. A. David, J. M. Vitek, K. Mundra and T. DebRoy: Mater. Sci. Technol., 11 (1995), 186.
28. S. S. Babu, S. A. David, J. M. Vitek, K. Mundra and T. DebRoy: Sci. Technol. Weld. Joining, 4 (1999), 276.
29. N. Bailey and R. J. Pargeter: The Influence of Flux Type on the Strength and Toughness of Submerged Arc Weld Metal, The Welding Institute, Abington, (1988), 33.
30. A. Kluken and O. Grong: Metall. Trans. A., 20 (1989), 1335.
31. H. K. D. H. Bhadeshia and L.-E. Svensson: Mathematical Modeling of Weld Phenomena, ed. by H. Cerjak and K. E. Easterling, The Institute of Materials, London, (1993), 109.
32. T. Koseki, S. Ohkita and N. Yurioka: Sci. Technol. Weld. Joining, 2 (1997), 65.
33. J. W. Christian: The Theory of Transformations in Metal and Alloys-Part I Equilibrium and General Kinetic Theory, 2nd Ed., Pergamon Press, Oxford, (1981), 525.
34. S. S. Babu, F. Reidenbach, S. A. David, Th. Bollinghaus and H. Hoffmeister: Sci. Technol. Weld. Joining, 4 (1999) 63.
35. T. Hong, T. DebRoy, S. S. Babu and S. A. David: Metall. Trans. B., 31B (2000) 161.
36. M. A. Quintana, J. McLane, S. S. Babu and S. A. David: Weld. J., 80, (2001), 98s.
37. D. J. Kotecki and R. A. Moll: Weld. J., 49 (1970), 157s.
38. D. J. Kotecki and R. A. Moll: Weld. J., 51 (1972), 138s.
39. B. Sundman, B. Jansson and J. O. Andersson: Calphad, 9 (1985), 1.
40. S. A. David and J. M. Vitek: Int. Met. Rev., 34 (1989), 213.
41. J.-O. Andersson, L. Hoglund, B. Jonsson and J. Ågren. Fundamentals and Applications of Ternary Diffusion, ed. by G. R. Purdy, Pergamon Press, New York, (1990), 153.
42. A. Engstrom, L. Hoglund and J. Agren: Metall. Mater. Trans. A, 25A (1994), 1127.
43. S. S. Babu, S. A. David and M. A. Quintana: Weld. J., 80 (2001), 91s.
44. M. J. Aziz: J. Appl. Phys., 53 (1982), 1158.
45. W. Kurz, B. Giovanola and R. Trivedi: Acta Metall., 34 (1986), 823.
46. N. Suutala: Metall. Trans. A, 14A (1983), 191.
47. R. Trivedi and W. Kurz: Int. Matter. Rev., 39 (1994), 49.
48. O. Hunziker, M. Vandyoussefi and W. Kurz: Acta Mater., 46 (1998), 6325.
49. S. A. David, J. M. Vitek and T. L. Hebble: Weld. J., 66 (1987), 289s.
50. S. S. Babu, J. W. Elmer, S. A. David and M. A. Quintana: Proc. R. Soc. (London) A., 458 (2002), 811.
51. V. Karpenko, J. H. Kinney, S. Kulkarni, K. Neufel, C. Pope, K. G. Tirsell, J. Wong, J. Cernio, T. Troxel and J. Yang: Rev. Sci. Instrum., 60 (1989), 1451.
52. S. Fukumoto and W. Kurz: ISIJ Int., 37 (1997), 677.
53. S. Fukumoto and W. Kurz: ISIJ Int., 38 (1998), 71.
54. S. Fukumoto and W. Kurz: ISIJ Int., 39 (1999), 1270.
55. W. Zhang and T. DebRoy: unpublished research, The Pennsylvania State University, PA, (2002).
56. H. K. D. H. Bhadeshia: Bainite in Steels: Transformations, Microstructure, and Properties, 2nd Ed., The Institute of Materials, London, (2001).
57. H. K. D. H. Bhadeshia, L.-E. Svensson and B. Gretoft: Acta Metall., 33 (1985), 1271.
58. G. I. Rees and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 10 (1994), 353.
59. S. S. Babu and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 6 (1990), 1005.
60. R. A. Ricks, G. S. Barrite and P. R. Howell: Proc. Conf. on Solid State Phase Transformations 87, The Institute of Metals, London, (1979), 463.
61. R. A. Ricks and G. S. Barrite: J. Mater. Sci., 17 (1982), 732.
62. S. J. Jones and H. K. D. H. Bhadeshia: Metall. Mater. Trans. A, 28A (1997), 2005.
63. G. T. Eldis: Hardenability Concepts with Applications to Steel, ed. D. V. Doane and J. S. Kirkaldy, American Institute of Mining, Metallurgical and Petroleum Engineer, Inc., Warrendale, PA, (1978), 126.
64. H. K. D. H. Bhadeshia: J. de. Physique, 43 (1982), C4-443.
65. G. I. Rees and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 8 (1992), 985.
66. G. I. Rees and H. K. D. H. Bhadeshia: Mater. Sci. Technol., 8 (1992), 994.
67. N. A. Chester and H. K. D. H. Bhadeshia: J. Phys. IV France, 7, (1997), C5-41.
68. S. S. Babu and H. K. D. H. Bhadeshia: Mater. Sci. Eng. A, A142 (1991), 209.
69. H. K. D. H. Bhadeshia: Met. Sci., 15 (1981), 175.
70. S. S. Babu and H. K. D. H. Bhadeshia: Mater. Trans. JIM, 32 (1991), 679.
71. T. C. Tszeng: Mater. Sci. Eng. A, A293 (2000), 185.
72. S. J. Jones and H. K. D. H. Bhadeshia: Acta Mater., 45 (1997), 2911.
73. J. M. Vitek, S. A. David, M. W. Richey, J. Biffin, N. Blundell and C. J. Page: Sci. Technol. Weld. Joining, 6 (2001), 305.