Exploring total media wear

Minerals Engineering

Volumn 15, Issue 12, 2002, Pages 1073-1087

  Radziszewski, P ^a  

^a MCGILL UNIVERSITY   (Canada)

Author keywords

Comminution; Grinding; Mineral processing; Modelling; Simulation

Indexed keywords

ABRASION; CALIBRATION; COMPUTER SIMULATION; CORROSION; FINITE DIFFERENCE METHOD; MATHEMATICAL MODELS; MECHANICAL TESTING;

BOND ABRASION TEST; DISCRETE ELEMENT CHARGE MOTION MODEL; TOTAL MEDIA WEAR;

GRINDING (COMMINUTION);

EID: 0036970171     PISSN: 08926875     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0892-6875(02)00228-5     Document Type: Article

References (98)

1. Adam, Wasaki, 1984. Pyrrhotite-grinding media interaction and its effects on flotability at different applied potentials. Miner. Metall. Process. 1, 81-87.
2. Adam, Natarajan, Wasaki, 1984. Grinding media wear and its effect on the flotation of sulphide mineral. Int. J. Miner. Process. 12, 39-54.
3. Austin, Klimpel, 1985. Ball wear and ball distributions in tumbling ball mills. Powder Technol. 41, 279-286.
4. Baker, Malicsi, Iwasaki, 1990. Effect of coal on the corrosive wear of grinding media. Miner. Metall. Process. 7, 110-113.
5. Blickensderfer, Tylczak, 1989. Evaluation of commercial US grinding balls by laboratory impact and abrasion tests. Miner. Metall. Process 6, 60-66.
6. Briceno, Chander, 1988. An electrochemical characterization of pyrites from coal and ore studies. Int. J. Miner. Process. 24, 73-80.
7. Burton, 1966. Changes in the state of solids due to milling processes. Trans. Inst. Chem. Eng. 44, 37-41.
8. Chander, Briceno, 1987. Kinetics of pyrite oxidation. Miner. Metall. Process. 4, 171-176.
9. Cleary, P.W., 1998. Predicting charge motion, power draft, segregation, wear and particle breakage in tumbling mills using discrete element methods. Miner. Eng. 11 (11), 1061-1080.
10. Dean, France, Ketcham, 1971. Electrochemical methods, Handbook of corrosion testing and evaluation. Wiley, New York, p. 170, Chapter 8.
11. Dorlot, Baïlon, Masounave, Des Matériaux, Éd. l'École Polytechnique, Montréal, 1986.
12. Durman, 1988. Progress in abrasion-resistant materials for use in comminution processes. Int. J. Min. Process. 22, 381-400.
13. Eyre, 1976. Wear characteristics of metals. Tribolo. Int. 10, 203-212.
14. Forssberg, Subrahmanyan, 1993. Grinding, pulp chemistry and particle flotability. In: XVIII International Mineral Proceeding Congress, AIMM vol. 1, pp. 1-6.
15. Fuerstenau, Venkataraman, Velamakanni, 1985. Effect of chemical additives on the dynamics of grinding media in wet ball mill grinding. Int. J. Miner. Process. 15, 251-268.
16. Gangopadhyay, Moore, 1985. The role of abrasion and corrosion in grinding media wear. Wear 104, 49-64.
17. Gangopadhyay, Moore, 1987. Effect of impact on the grinding media and mill liner in a large semiautogenous mill. Wear 114, 249-260.
18. Garrison, 1987. Abrasive wear resistance: the effects of ploughing and the removal of ploughed material. Wear 114, 239-247.
19. Greef, Peat, Peter, Pletcher, Robinson, 1985. Instrumental methods in electrocheministry. Wiley, New York, pp. 251-282.
20. Gundewar, Natarajan, Nayak, Satyanarayana, 1990. Laboratory studies on ball wear in the grinding of a hematiti-magnetite ore. Int. J. Miner. Process. 29, 121-139.
21. Guy, Trahar, 1984. The influence of grinding and flotation environments on the laboratory batch flotation of galena. Int. J. Miner. Process. 12, 15-38.
22. Hinde, A.L., 1998. Future considerations for the comminution of Witswaterrand gold ores. Comminution '98, Brisbane.
23. Hoey, Dingley, Freeman, 1977. Corrosion behaviour of various steels in ore grinding, CIM Bull., Feb., 105-109
24. Ayyala, Subrahmanyam, Pughm Forssberg (1993) Effect of corrosion inhibitors on grinding and flotation of a lead-zinc ore. Miner. Eng. 6, 929-935.
25. Huard, Masounave, Fiset, Coté, Noël, 1987. The effects of size and shape of abrasive particles on the measurement of wear rate using a dry sand rubber wheel test. In: Wear of Materials, ASME, New York, 689-699.
26. Inoue, T., Okaya, K., 1996. Grinding mechanism of centrifugal mills - A batch ball mill simulator. Int. J. Miner. Process. (44-45), 425-435.
27. Iwasaki, Pozzo, Natarajan, Adam, Orlich, 1988. Nature of corrosion and abrasive wear in ball mill grinding. Int. J. Miner. Process. 22, 345-360.
28. Iwasaki, Reid, Lex, Smith, 1973. The effect of autogenous and ball mill grinding on sulphide flotation. Miner. Eng. 35, 1184.
29. Iwasaki, Riemer, Orlich, 1985a. Effect of percent solids and mill loading on ball wear in laboratory taconite grinding. Miner. Metall. Process. 2, 185-192.
30. Iwasaki, Riemer, Orlich, Natarajan, 1985b. Corrosive and abrasive wear in ore grinding. Wear 103, 253-267.
31. Jacobson, Wallen, Hogmark, 1987. Correlation between groove size, wear rate and topography of abraded surfaces. Wear 115, 83-93.
32. Jang, Iwasaki, 1992. Size and morphology of grinding media wear debris. Miner. Metall. Process. 9, 158-160.
33. Katzer, Klimpel, Sewell, 1981. Example of the laboratory characterization of grinding aids in the wet grinding of ores. Miner. Eng. 33, 1471-1476.
34. Khruschov, 1974. Principles of abrasive wear. Wear 28, 69-88.
35. Klimpel, 1982. Chemical additives for wett grinding of minerals. Powder Technol. 31, 239-253.
36. Klimpel, Manfroy, 1978. Chemical grinding aids for increasing throughput in the wet grinding of ores. Ind. Eng. Chem. Prcess. Des. Dev. 17, 518-523.
37. Learmont, Iwasaki, 1984. Effect of grinding media on galena flotation. Miner. Metall. Proc. 1, 136-143.
38. Malghan, 1982. Methods to reduce steel wear in grinding mills. Miner. Eng. 32, 684-690.
39. Martin, McIvor, Finch, Rao, 1991. Review of the effect of grinding media on flotation of sulphide mineral. Miner. Eng. 4, 121-132.
40. Meulendyke, Purdue, 1989. Wear of grinding media in the mineral processing industry: an overview. Miner. Metall. Process. 6, 167-171.
41. Mishra, B.K., Rajamani, R.K., 1994a. Simulation of charge motion in ball mills, Part 1: experimental verifications. Int. J. Miner. Process. 40, 171-186.
42. Mishra, B.K., Rajamani, R.K., 1994b. Simulation of charge motion in ball mills, Part 2: numerical simulations. Int. J. Miner. Process. 40, 187-197.
43. Misra, Finnie, 1980. A classification of three-body abrasive wear and design of a new tester. Wear 60, 111-121.
44. Misra, Finnie, 1981a. A review of the abrasive wear of metals. Wear 68, 41-56.
45. Misra, Finnie, 1981b. On the size effect in abrasive and erosive wear. Wear 65, 359-373.
46. Misra, Finnie, 1983. An experimental study of three-body abrasive wear. Wear 85, 57-68.
47. Moore, 1974. A review of two-body abrasive wear. Wear 27, 1-17.
48. Moore, Perez, Gangopadhyay, Eggert, 1988. Factors affecting wear in tumbling mills: influence of composition and microstructure. Int. J. Miner. Process. 22, 361-380.
49. Marayanan, Raghunathan, Nayak, Kahiri, 1983. Environmental effects on grinding. Int. J. Miner. Process. 10, 309-317.
50. Naarajan, 1992. Ball wear and its control in the grinding of a lead-zinc sulphide ore. Int. J. Miner. Process. 34, 161-176.
51. Natarajan, 1996. Laboratory studies on ball wear in the grinding of a chalcopyrite ore. Int. J. Miner. Process. 46, 205-214.
52. Natarajan, Iwasaki, 1984. Electrochemical aspects of grinding media-mineral interactions in magnetite ore grinding. Int. J. Miner. Process. 13, 53-71.
53. Natarajan, Reimer, Iwasaki, 1984a. Influence of pyrrhotite on the corrosive wear of grinding balls in magnetite ore grinding. Int. J. Miner. Process. 13, 73-81.
54. Natarajan, Riemer, Iwasaki, 1984b. Corrosive and erosive wear in magnetic taconite grinding. Miner. Metall. Process. 1, 10-14.
55. Nesbit, P.Q., Moys, H.M., 1998. Load behaviour in the HiCom nutating mill. Miner. Eng. 11 (10), 979-988.
56. Norman, 1980. Wear in ore processing machinery, Wear Control Handbook, ASME, New York, p. 1015.
57. Norman, Loeb, 1948. Wear tests on grinding balls. Trans. AIME 176, 490-526.
58. Pazhianur, Richardson, Adel, Yaon, 1996. Cathodic protection to minimise corrosive wear in ball mills. Soc. Miner. Eng. AIME, 96-165.
59. Perez, 1982. The role of wear in grinding media. M.Sc. Thesis, Univ. Minnesota.
60. Pitt, Chang, Wadsworth, Kotlvar, 1988. Laboratory abrasion and electrochemical test methods as a means of determining mechanisms and rates of corrosion and wear in ball mill. Int. J. Miner. Process. 22, 313-343.
61. Powell, M., Nurick, G.N., 1996a. A study of charge motion in rotary mills. Part 1-extension of the theory. Miner. Eng. 9 (2), 259-268.
62. Powell, M., Nurick, G.N., 1996b. A study of charge motion in rotary mills. Part 2 - experimental work. Miner. Eng. 9 (3), 343-350.
63. Powell, M., Nurick, G.N., 1996c. A study of charge motion in rotary mills. Part 3 - analysis of results. Miner. Eng. 9 (4), 399-418.
64. Pozzo, Malicsi, Iwasaki, 1990. Pyrite-pyrrhotite-griding media contact and its effect on flotation. Miner. Metall. Process. 7, 16-21.
65. Prasad, Kosel, 1984. A study of carbide removal mechanisms during quartz abrasion II: effect of abrasive particle shape. Wear 95, 87-102.
66. Rabinowicz, 1996. Friction and Wear of Materials, second ed. John Wiley and Sons, Toronto.
67. Radziszewski, P., 1986. Modeling comminution as a function of crushing, tumbling and grinding in a ball mill, (in french), Masters' Thesis, U. Laval.
68. Radziszewski, 1997. Chapter 4, Ball mill media wear and prediction. JKMRC/AMIRA P9L Project report, December, 35-51.
69. Radziszewski, 1998. Chapter 5, Preliminary results from media wear tests. JKMRC/AMIRA P9L Project report, June, 75-86.
70. Radziszewski, 1999a. Exploring total media wear. JKMRC/AMIRA P9L Project report, December.
71. Radziszewski, 1999b. Comparing Three DEM Charge Motion Models. Miner. Eng. 12 (12), 809-826.
72. Radziszewski, Morrell, 1998. Fundamental Discrete Element Charge Motion Model Validation. Miner. Eng. 11 (12), 1161-1178.
73. Radziszewski, P., Tarasiewicz, S., 1989. Ballmill simulation: part II-numerical solution to ballcharge model. Trans. Soc. Comput. Simul. 6 (2), 75-88.
74. Radziszewski, Tarasiewicz, 1993. Modelling and simulation of ball mill wear. Wear 160, 309-316.
75. Radziszewski, Valery, 1999. Cadia SAG mill simulated charge behaviour. CMP, Ottawa, January, 267-283.
76. Rajagopal, Iwasaki, 1992. The properties and performance of cast iron grinding media. Miner. Process. Extr. Metall. Rev. 11, 75-106.
77. Sailors, 1989. Cast high chromium media in wet grinding. Miner. Metall. Process. 6, 172-178.
78. Senior, Poling, Frost, 1989. Surface contaminants on cassiterite recovered from a industrial concentrator. Int. J. Min. Process. 27, 221-242.
79. Scieszka, 1989. A technique to study abrasive wear in contacts with particulate materials. Wear 119, 237-249.
80. Scieszka, Dutkiewicz, 1991. Testing abrasive wear in mineral comminution. Int. J. Miner. Process. 32, 81-110.
81. Shinozaki, Semma, 1981. Effects of number and size of milling balls on the mechanochemical activation of fine crystalline solids. Ind. Eng. Chem. Fundam. 20, 15-38.
82. Tarasiewicz, S., Radziszewski, P., 1989. Ballmill simulation: part I-a kinetic model of ballmill charge motion. Trans. Soc. Comput. Simul. 6 (2), 61-73.
83. Thorton, 1973. The effect of grinding media on flotation selectivity. In: 5th Ann. CMP, Ottawa, p. 224.
84. Vang, Iwasaki, Moore, 1989. Wear behaviour of martensite and ferrite in high chromium steel balls in wet grinding and implication to flotation. Miner. Metall. Process. 6, 161-166.
85. Vathsala, Natarajan, 1989. Some electrochemical aspects of grinding media corrosion and sphalerite flotation. Int. J. Miner. Process. 26, 193-203.
86. Wang, Xie, 1992. The effect of grinding media and environment of the surface properties and flotation behaviour of sulphide minerals. Miner. Proc. Extrac. Metall. Rev. 7, 49-79.
87. Weiss, N.L., 1985, In: SME Mineral Processing Handbook, vol. 1, Society of Mining Engineers, 3A-25-3A-27.
88. Xu, Tan, Zhou, 1991. Impact wear mechanisms of medium carbon steel under various dry and wet conditions. Wear of Materials, ASME, 33-40.
89. Yelloji Rao, Natarajan, 1988a. Electrochemical aspects of grinding media-mineral interaction on sulphide flotation. Bull. Mater. Sci. 10, 411-422.
90. Yelloji Rao, Natarajan, 1988b. Influence of galvanic interaction between chalcopyrite and some metallic material on flotation. Miner. Eng. 1, 281-294.
91. Yelloji Rao, Natarajan, 1988c. Effect of grinding media-mineral galvanic interaction on chalcopyrite flotation, Proc. Asian Mining '88. Institute of Mineral Metallurgy, London, pp. 147-157.
92. Yelloji Rao, Natarajan, 1989a. Effect of galvanic interaction between grinding media and mineral on sphalerite flotation. Int. J. Miner. Process. 27, 95-110.
93. Yelloji Rao, Natarajan, 1989b. Electrochemincal effects of mineral-mineral interactions on the flotation of chalcopyrite and sphalerite. Int. J. Miner. Process. 27, 279-294.
94. Yelloji Rao, Natarajan, 1990. Studies on chalcopyrite ore grinding with respect to ball wear and effect on flotation. Miner. Metall. Process. 7, 75-106.
95. Yelloji Rao, Natarajan, 1991. Factors influencing ball wear and flotation with respect to ore grinding. Miner. Process. Extrac. Metall. Rev. 7, 137-173.
96. Zhang, D., Whiten, B., 1998. An efficient calculation method for particle motion in discrete element simulations. Powder Technol. 98 (3), 223-230.
97. Zum Gahr, 1979. Abrasive wear on metallic materials. Wear, 73-104.
98. Zum Gahr, Eldis, 1980. Abrasive wear of white cast irons. Wear 64, 175-194.