Numerical determination of cutting parameters for the control of Klingelnberg spiral bevel gear geometry

Journal of Mechanical Design

Volumn 124, Issue 4, 2002, Pages 761-771

  Lelkes, Márk ^a   Márialigeti, János ^a   Play, Daniel ^b  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

^b NONE

Author keywords

[No Author keywords available]

Indexed keywords

EPICYCLIC GEARS; GEAR CUTTING; GEAR TEETH; GEOMETRY; NUMERICAL ANALYSIS; NUMERICAL METHODS;

CONTACT SIMULATION; KLINGELNBERG CYCLO-PALLOID SYSTEM;

BEVEL GEARS;

EID: 0036937138     PISSN: 10500472     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1518502     Document Type: Article

References (17)

1. Gosselin, C. J., and Cloutier, L., 1993, "The Generating Space for Parabolic Motion Error Spiral Bevel Gears Cut by the Gleason Method," ASME J. Mech. Des., 115, pp. 483-489.
2. Fong, Z. H., 2000, "Mathematical Model of Universal Hypoid Generator with Supplemental Kinematic Flank Correction Motions," ASME J. Mech. Des., 122, pp. 136-142.
3. Handschuch, R. F., Bibel, G. B., 1999, "Experimental and Analytical Study of Aerospace Spiral Bevel Gear Tooth Fillet Stresses," ASME J. Mech. Des., 121, pp. 565-572.
4. Litvin, F. L., Wang, J. C., Handschuh, R. F., 1996, "Computerized Design and Analysis of Face-Milled. Uniform Tooth Height Spiral Bevel Gears Drives," ASME J. Mech. Des., 118, pp. 573-579.
5. Márialigeti, J., Cseke, J., and Lelkes, M., 2000, "Connection of Some Cutting Parameters with Tooth Surface Modification in case of Epicycloidal Spiral Bevel Gears," Proceedings of Second Conference on Mechanical Engineering, Budapest, Vol. 2, pp. 587-591.
6. Schriefer, H., 1983, "Verhzahnundsgeometrie und Laufverhalten bogenverzahnter Kegelradgetriebe," RWTH Aachen Dissertation.
7. Zhang, Y., Litvin, F. L., Maruyama, N., Takeda, R., and Sugimoto, M., 1994, "Computerized Analysis of Meshing and Contact of Real Tooth Surfaces," ASME J. Mech. Des., 116, pp. 677-682.
8. Gosselin, C. J., Guertin, T., Remond, D., and Jean, Y., 2000, "Simulation and Experimental Measurement of the Transmission Error of Real Hypoid Gears Under Load," ASME J. Mech. Des., 122, pp. 109-122.
9. Guingand, M., De Vaujany, J. P., Cheval, C., and Play, D., 2000, "Influence of Design Parameters and Tooth Profile Modification for Reducing Gear Transmission Error," ASME IDECT/CIE 8th International Power Transmission and Gearing Conference, Baltimore. DETC 2000/PTG-14424.
10. Hurtado, O. G., 1978, "Kegelradgetriebe Berechunung und Messung der Zahnflankengeometrie-Bestimmung der Eingriffsverhaltnisse," RWTH Aachen Dissertation.
11. Kavasaki, K., Tamura, H., and Nakano, Y., 1994, "A Method for Inspection of Spiral Bevel Gears in Klingelnberg Cyklo-Palloid System," Proceedings of the 1994 International Gearing Conference, Newcastle upon Tyne. pp. 305-310.
12. Mueller, H., and Eder, H., 2001, "Closed Loop Technology for Dry Cutting of Spiral Bevel and Hypoid Gears." Proceedings of The JSME International Conference on Motion and Power Transmissions MPT2001-Fukuoka, Vol. 1 pp. 393-397.
13. Remond, D., and Play, D., 1999, "Advantages and Perspectives of Gear Transmission Error Measurements with Optical Encoders," 4th CMET Conference, Paris, pp. 199-210.
14. Litvin, F. L., 1989, Theory of Gearing, NASA Reference Publication 1212.
15. Fong, Z. H., and Tsay, C. B., 1992, "Kinematical Optimization of Spiral Bevel Gears," ASME J. Mech. Des., 114, pp. 498-506.
16. Zhang, Y., Litvin, F. L., and Handschuh, R. F., 1995, "Computerized Design of Low-Noise Face-Milled Spiral Bevel Gears," Mechanism and Machine Theory, 30(8), pp. 1171-1178.
17. Lelkes, M., Play, D., and Márialigeti, J., 2001, "Cutting Parameters Definition for Klingelnberg Spiral Bevel Gears Optimization," Proceedings of The JSME International Conference on Motion and Power Transmissions MPT2001-Fukuoka, Vol. 1, pp. 375-380.