Hydrogen trapping in ferritic steel weld metal

International Materials Reviews

Volumn 47, Issue 4, 2002, Pages 191-223

  Maroef, I ^a   Olson, D L ^a   Eberhart, M ^a   Edwards, G R ^a  

^a Department of Metallurgical and Materials Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYING; COMPUTATIONAL METHODS; CRACK INITIATION; FERRITES; HEAT TREATMENT; HYDROGEN; MICROSTRUCTURE; THERMAL CYCLING; WELDS;

HYDROGEN TRAPPING;

STEEL;

EID: 0036934368     PISSN: 09506608     EISSN: None     Source Type: Journal    
DOI: 10.1179/095066002225006548     Document Type: Review

References (179)

1. J. L. DAVIDSON and S. P. LYNCH: in 'Hydrogen management for welding application', (ed. J. E. M. Braid et al.), 9-36; 1999, Ottawa, Ont., Materials Technology Laboratory/CANMET.
2. V. F. MUSIYACHENKO and S. B. KASATKIN: Automat. Weld. (USSR), 1985, (9), 3-8.
3. P. W. HOLSBERG and R. J. WONG: in 'Weldability of materials', (ed. R. A. Patterson and K. W. Mahin), 219-239; 1990, Materials Park, OH, ASM International.
4. G. M. PRESSOUYRE and I. M. BERNSTEIN: Metall. Trans. A, 1981, 12A, 835-844.
5. I. M. BERNSTEIN and G. M. PRESSOUYRE: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 641-685; 1985, Park Ridge, NJ, Noyes.
6. J. P. HIRTH: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 131-139; 1985, Park Ridge, NJ, Noyes.
7. P. KEDZIERZAWSKI: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 271-288; 1985, Park Ridge, NJ, Noyes.
8. R. GIBALA and A. J. KUMNICK: in 'Hydrogen embrittlement and stress corrosion cracking', (ed. R. Gibala and R. F. Hehemann), 61-77; 1984, Metals Park, OH, ASM.
9. R. B. MCLELLAN: Acta Metall., 1972, 20, 11-35.
10. R. GIBALA: in 'Stress corrosion cracking and hydrogen embrittlement of iron base alloys', NACE-5, (ed. R. W. Staehle et al.), 244-268; 1977, Houston, TX, NACE.
11. J. P. HIRTH: Metall. Trans. A, 1980, 11A, 861-890.
12. W. Y. CHOO and J. Y. LEE: Metall. Trans. A, 1982, 13A, 135-140.
13. A. J. KUMNICK and H. H. JOHNSON: Acta. Metall., 1980, 28, 33-40.
14. K. ONO and M. MESHI: Acta Metall., 1992, 40, 1357-1364.
15. T. ASAOKA, C. DAGBERT, M. AUCOUTURIER, and J. GALLAND: Scr. Metall., 1977, 11, 467-472.
16. E. CHORNET and R. W. COUGHLIN: J. Catal., 1972, 72, 246-265.
17. D. O. HAYWARD and B. M. W. TRAPNELL: in 'Chemisorption', (ed. B. M. W. Trapnell), 203; 1964, London, Butterworths.
18. J. R. SCULLY, J. A. VAN DEN AVYLE, M. J. CIESLAK, A. D. ROMIG, JR, and C. R. HILLS: Metall. Trans. A, 1991, 22A, 2429-2445.
19. K. Y. LEE, J. Y. LEE, and D. R. KIM: Mater. Sci. Eng., 1984, 67, 213-220.
20. H. H. PODGURSKI and R. A. ORIANI: Metall. Trans., 1972, 3, 2055-2063.
21. I. MAROEF and D. L. OLSON: Proc. Int. Conf. on Materials Solution '99: 'Joining of advanced and specialty materials II', 227-235; 1999, Materials Park, OH, ASM International.
22. J. L. LEE and J. Y. LEE: Met. Sci., 1983, 17, 426-432.
23. J. L. LEE and J. Y. LEE: Metall. Trans. A, 1986, 17A, 2183-2186.
24. P. LACOMBE, M. AUCOUTURIER, J. P. LAURENT, and G. LA PASSET: in 'Stress corrosion cracking and hydrogen embrittlement of iron base alloys', NACE-5, (ed. R. W. Staehle et al.), 423-430; 1977, Houston, TX, NACE.
25. H. O. LEE and J. Y. LEE: Acta Metall., 1984, 32, 131-136.
26. G. M PRESSOUYRE and I. M. BERNSTEIN: Metall. Trans. A, 1978, 9A, 1571-1580.
27. G. M. PRESSOUYRE: Metall. Trans. A, 1979, 10A, 1571-1573.
28. A. R. TROIANO: Trans. ASM, 1960, 52, 151-177.
29. M. WEISTEIN and J. F. ELLIOT: Trans. AIME, 1963, 227, 382.
30. A. I. SHIRLEY and C. K. HALL: Scr. Metall., 1983, 17, 1003-1008.
31. G. M. PRESSOUYRE and I. M BERNSTEIN: Metall. Trans. A, 1978, 9A, 1571-1580.
32. W. SCHWARZ and H. ZITTER: Arch. Eisenhüttenwes., 1965, 36, 343-349.
33. F. E. FUJITA: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 1-15; 1985, Park Ridge, NJ, Noyes.
34. C. H. P. LUPIS and J. F. ELLIOT: Acta Metall., 1967, 15, 265-276.
35. G. K. SIGWORTH and J. F. ELLIOT: Met. Sci., 1974, 8, 298-310.
36. H. MABUCHI and H. NAKAO: Trans. Iron Steel Inst. Jpn, 1983, 23, 504-512.
37. M. GUTTMAN: Surf. Sci., 1975, 53, 213.
38. C. J. MCMAHON, JR and L. MARCHUT: J. Vac. Sci. Technol., 1978, 15, (2), 450-466.
39. Y. ITSUMI and D. E. ELLIS: J. Mater. Res., 1996, 11, (9), 2206-2213.
40. Y. ITSUMI and D. E. ELLIS: J. Mater. Res., 1996, 11, (9), 2214-2219.
41. D. L. OLSON, I. MAROEF, C. LENSING, D. SMITH, T. WILDEMAN, and M. EBERHART: in 'Hydrogen manangement in steel weldments', (ed, J. L. Davidson and D. L. Olson), 1-19; 1996, Melbourne, Defense Science and Technology Organization (DSTO)/Welding Technology Institute of Australia (WTIA).
42. M. P. PULS: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 114-130; 1985, Park Ridge, NJ, Noyes.
43. N. F. FIORE and C. L. BAUER: Prog. Mater. Sci., 1967, 13, 87-134.
44. J. P. HIRTH and B. CARNAHAN: Acta Metall., 1978, 26, 1795-1803.
45. W. G. WOLFER and M. I. BASKES: Acta Metall., 1985, 33, 2005-2011.
46. D. P. FAIRCHILD, D. G. HOWDEN, and w. A. T. CLARK: Metall. Trans. A, 2000, 31A, 653-667.
47. D. BROOKSBANK and K. W. ANDREWS: J. Iron Steel Inst., April 1972, 246-255.
48. J. GEGNER, G. HORZ, and R. KIRCHHEIM: in 'Hydrogen effects in materials', (ed. A. W. Thompson and N. R. Moody), 35-45; 1996, Warrendale PA, TMS.
49. I. TAKAHASHI, Y. MATSUMOTO, and T. TANADA: Proc. 'Japan Institute of Metals International Symposium: JIMIS-2', Minakami, Japan, 1979, 285-289.
50. S. M. LEE and J. Y. LEE: Acta Metall., 1987, 35, 2695-2700.
51. M. F. STEVENS and I. M. BERNSTEIN: Metall. Trans. A, 1989, 20A, 909-919.
52. R. VALENTINI, A. SOLINA, S. MATERA, and P. DE GREGORIO; Metall. Trans. A, 1996, 27A, 3773-3780.
53. H. H. JOHNSON: in 'Hydrogen embrittlement and stress corrosion cracking', (ed. R. Gibala and R. F. Hehemann), 3-27; 1984, Metals Park, OH, ASM.
54. H. H. JOHNSON, J. G. MORLET, and A. R. TROIANO: Trans. AIME, 1958, 212, 526-536.
55. H. G. NELSON: in 'Treatise on materials science and technology', Vol. 25, 'Embrittlement of engineering alloys', (ed. C. L. Briant and S. K. Banerji), 275-359; 1983, New York, Academic Press.
56. C. D. BEACHEM: Metall. Trans. A, 1972, 3A, 437-451.
57. S. A. GEDEON and T. EAGAR: Weld. J., 1990, 69, 213-220s.
58. N. J. PETCH: Philos. Mag., 1956, 1, 331-337.
59. R. P. FROHMBERG, W. J. BARNETT, and A. R. TROIANO: Trans. ASM, 1955, 47, 892-925.
60. R. A. ORIANI: Corrosion, 1987, 43, (7), 390-397.
61. H. K. BIRNBAUM and P. SOFRONIS: in 'Hydrogen effects in materials', (ed. A. W. Thomson and N. R. Moody), 15-32; 1996, Warrendale PA, TMS.
62. M. E. EBERHART, M. M. DONOVAN, J. M. MACLAREN, and D. P. CLOUGHERTY: Prog. Surf. Sci., 1991, 36, (1), 1-34.
63. G. M. PRESSOUYRE: Acta. Metall., 1980, 28, 895-911.
64. M. I. LUPPO and J. OVEJERO-GARCIA: Corros. Sci., 1991, 32, 1125-1136.
65. H. Y. YU and J. C. M. LI: in 'Computer simulation for materials application: Nuclear metallurgy', Vol. 20, (ed. R. J. Arsenault et al.), 872-881; 1976, New York, AIME (Washington DC, Library of Congress Cat. Card #76-13801).
66. M. Iino: Metall. Trans. A, 1978, 9A, 1581-1590.
67. J. C. M. LI: Metall. Trans. A, 1978, 9A, 1353-1380.
68. G. M. PRESSOUYRE and F. M. FAURE: in 'Hydrogen embrittlement: prevention and control', STP963, (ed. L. Raymond), 353-371; 1988, Philadelphia, PA, ASTM.
69. G. M. PRESSOUYRE: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 27-38; 1985, Park Ridge, NJ, Noyes.
70. R. VALENTINI and A. SOLINA: Mater. Sci. Technol., 1994, 10, 908-914.
71. B. G. POUND: Acta Metall. Mater., 1990, 38, (12), 2372-2381.
72. H. LUKITO and Z. S. SMIALOWSKA: Corros. Sci., 1997, 39, (12), 2151-2169.
73. R. B. MCLELLAN: Acta Metall., 1979, 27, 1655-1663.
74. R. KIRCHHEIM: Acta Metall., 1982, 30, 1069-1078.
75. E. FROMM and G. HORZ: Int. Met. Rev., 1980, 25, 269-311.
76. K. KIUCHI and R. B. MCLELLAN: Acta Metall., 1983, 31, 961-984.
77. N. R. QUICK and H. H. JOHNSON: Acta Metall., 1978, 26, 903-907.
78. R. B. MCLELLAN: in 'Phase stability in metals and alloys', (ed. P. S. Rudman et al.), 1-43; 1969, New York, MCGraw-Hill.
79. W. J. ARNOULT and R. B. MCLELLAN: Acta Metall., 1973, 21, 1397-1403.
80. R. G. DA SILVA, S. W. STAFFORD, and R. B. MCLELLAN: J. Less-Common Met., 1976, 49, 407-420.
81. R. A. ORIANI: Trans. Fusion Technol., 1994, 26, 235-262.
82. D. N. BESHERS: Acta Metall., 1958, 6, 521-523.
83. Y. FUKAI: 'The metal-hydrogen system'; 1993, Berlin, Springer-Verlag.
84. R. A. ORIANI: Acta Metall, 1970, 18, 147-157.
85. H. G. NELSON and J. E. STEIN: Gas phase hydrogen permeation through alpha iron, 4130 steel, and 304 stainless steel from < 100°C to near 600°C, TN-D-7265, NASA Ames Research Center, Moffett Field, CA, 1973.
86. O. ODEGARD, G. M. EVANS, and N. CHRISTENSEN: Met. Constr, 1971, 3, 47-49.
87. G. M. EVANS and E. C. ROLLASON: J. Iron Steel Inst., 1969, 207, 1484-1490.
88. F. R. COE and J. MORETON: Trans. AIME, 1969, 218, 1104-1112.
89. L. S. DARKEN and R. P. SMITH: Corrosion, 1949, 5, 1.
90. R. A. ORIANI: Acta Metall., 1970, 18, 147-157.
91. B. CHEW: Met. Sci. J., 1971, 5, 195-200.
92. M. Iino: Acta Metall., 1982, 30, 367-375.
93. A. MCNABB and P. K. FOSTER: Trans. AIME, 1963, 227, 618-627.
94. H. H. JOHNSON: Metall. Trans. B, 1988, 19B, 691-707.
95. G. R. CASKEY and W. L. PILLINGER: Metall. Trans. A, 1975, 6A, 467-476.
96. R. A. ORIANI: Proc. Conf. 'Fundamental aspects of stress corrosion cracking', 32-50; 1967, Houston, TX, NACE.
97. M. Iino: Acta Metall., 1982, 30, 367-375.
98. C. ZENER: in 'Imperfections in nearly perfect crystals', (ed. W. Shockely et al.), 289-314; 1952, New York, Wiley.
99. T. R. WAITE: Phys. Rev., 1957, 107, 463-470.
100. G. M. PRESSOUYRE and I. M. BERNSTEIN: Acta. Metall., 1979, 27, 89-100.
101. C. SYKES, H. H. BURTON, and C. C. GEGG: J. Iron Steel Inst., 1947, 156, 155-180.
102. J. A. DONOVAN: Metall. Trans. A, 1976, 7A, 145-149.
103. M. R. LOUTHAN, JR, G. R. CASKEY, JR, J. A. DONOVAN, and D. E. RAWL, JR: Mater. Sci. Eng., 1972, 10, 357-368.
104. M. KURKELA and R. M. LATANISION: Scr. Metall., 1979, 13, 927-932.
105. J. K. TIEN, S. V. NAIR, and R. R. JENSEN: in 'Hydrogen effects in metals', (ed. I. M Bernstein and A. W. Thompson), 37-56; 1981, Warrendale, PA, TMS.
106. S. V. NAIR, R. R. JENSEN, and J. K. TIEN: Metall. Trans. A, 1983, 14A, 385-393.
107. J. K. TIEN, A. W. THOMPSON, I. M. BERNSTEIN, and R. J. RICHARDS: Metall. Trans. A, 1976, 7A, 821-829.
108. H. H. JOHNSON and J. P. HIRTH: Metall. Trans. A, 1976, 7A, 1543-1548.
109. J. K. TIEN: in 'Effect of hydrogen on behavior of materials', (ed. A. W. Thompson and I. M. Bernstein), 309-326; 1976, Warrendale, PA, TMS.
110. M. HASHIMOTO and R. M. LATANISION: Metall. Trans. A, 1988, 19A, 2789-2798.
111. E. LUNARSKA and A. ZIELINSKI: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 289-320; 1985, Park Ridge, NJ, Noyes.
112. P. KEDZIERZAWSKI: in 'Hydrogen degradation of ferrous alloys', (ed. R. A. Oriani et al.), 251-270; 1985, Park Ridge, NJ, Noyes.
113. R. LIN and H. H. JOHNSON: Acta Metall., 1982, 30, 1819-1828.
114. I. M. BERNSTEIN and A. W. THOMPSON: in 'Advanced techniques for characterizing hydrogen in metals', (ed. N. F. Fiore and B. J. Berkowitz), 89-104; 1981, Warrendale, PA, TMS.
115. R. KIRCHHEIM and R. B. MCLELLAN; J. Electrochem. Soc., Solid State Sci. Technol., 1980, 127, (11), 2419-2425.
116. M. A. DEVANATHAN and Z. O. J. STACHURSKI: Proc. R. Soc., 1962, A270, 90-102.
117. R. W. LIN and H. H. JOHNSON: in 'Advanced techniques for characterizing hydrogen in metals', (ed. N. F. Fiore and B. J. Berkowitz), 105-118; 1981, Warrendale, PA, TMS.
118. P. L. CHANG and W. D. G. BENNETT: J. Iron Steel Inst., 1952, 205-213.
119. E. W. JOHNSON and M. L. HILL: Trans. AIME, 1960, 218, 1104-1112.
120. C. WERT and C. ZENER: Phys. Rev., 1949, 76, 1169-1175.
121. M. SURKEIN and R. HEIDERSBACH: in 'Advanced techniques for characterizing hydrogen in metals', (ed. N. F. Fiore and B. J. Berkowitz), 119-132; 1981, Warrendale, PA, TMS.
122. R. KIRCHHEIM and R. B. MCLELLAN: J. Electrochem. Soc., Solid State Sci. Technol., 1980, 127, (11), 2419-2425.
123. R. MCKIBBEN, R. M. SHARP, D. A. HARRINGTON, B. G. POUND, and G. A. WRIGHT: Acta Metall., 1987, 35, (1), 253-262.
124. B. G. POUND, G. A. WRIGHT, and R. M. SHARP: Acta Metall., 1987, 35, (1), 263-270.
125. M. Iino: Acta Metall., 1982, 30, 377-383.
126. M. Iino: Metall. Trans. A, 1985, 16A, 401-409.
127. J. O'M. BOCKRIS and P. K. SUBRAMANYAN: J. Electrochem. Soc., 1971, 118, (7), 1114-1119.
128. A. TURNBULL, M. W. CARROL, and D. H. FERRISS: Acta Metall., 1989, 37, (7), 2039-2046.
129. W. M. ROBERTSON: in 'Environmental degradation of engineering materials in hydrogen', (ed. M. R. Louthan et al.), 69-81, 1981, Blackburg, VA, VPI.
130. S. TRUBE and V. PAVLIK: 'Hydrogen effusion under isothermal and non-isothermal conditions from mild steel welds', IIW Document II-A-964-95, American Council, AWS, Miami, FA, 1995.
131. E. ABRAMOV and D. ELIEZER: in 'Hydrogen effects in materials', (ed. A. W. Thompson and N. R. Moody), 293-299; 1996, Warrendale, PA, TMS.
132. S. TRUBE and V. PAVLIK: 'Hydrogen effusion under isothermal and non-isothermal conditions from mild steel welds', IIW Document II-A-964-95, American Council, AWS, Miami, FA, 1995.
133. C. P. FLYNN: Phys. Rev., 1964, 113A, A587-A595.
134. C. P. FLYNN, J. BASS, and D. LAZARUS: Philos. Mag., 1965, 11, 521-538.
135. G. W. HONG and J. Y. LEE: Acta Metall., 1984, 10, 1581-1589.
136. J. Y. LEE and J. L. LEE: Philos. Mag., 1987, 56A, (3), 293-309.
137. J. L. LEE and J. Y. LEE: Metall. Trans. A, 1989, 20A, 1793-1802.
138. H. E. KISSINGER: Anal. Chem., 1957, 29, (11), 1702-1706.
139. I. MAROEF and D. L. OLSON: Proc. Int. Conf. Materials Solution '99, 'Joining of advanced and specialty materials II', 227-235; 1999, Materials Park, OH, ASM International.
140. Y. ITO and K. BESHO: J. Jpn. Weld. Soc., 1968, 37, (9), 983-991.
141. N. YURIOKA: 'Weldability of modern high strength steels', IIW Document II-A-914-94, American Council, AWS, Miami, Florida, 1994.
142. Standard methods for determination of diffusible hydrogen content of martensitic, bainitic, and ferritic weld metal produced by arc welding, ANSI/AWS A4, 3-93, AWS, Miami, FA, 1993.
143. The determination of the hydrogen content of ferritic arc weld metal (draft version of ISO 3690), IIW Document II-1055-91, Commission II of the IIW, Paris, France (revised 1995).
144. B. R. SOMERS: in 'ASM handbook', Vol. 6, 'Welding, brazing, and soldering', 405-407; 1993, Materials Park, OH, ASM International.
145. J. T. HICKEY, D. G. HOWDEN, and M. D. RANDALL: 'The metallurgy, welding, and qualification of microalloyed (HSLA) steel weldments'; 1990, Miami, FA, AWS/Microalloying Int.
146. N. YURIOKA and K. KOHIRA: 'A numerical analysis of the diffusion and trapping of hydrogen in steel welds', IIW Document IX 951-76, American Council, AWS, Miami, FA, 1976.
147. Y. KIKUTA: in 'Hydrogen effects in metals', (ed. I. M. Bernstein and A. W. Thompson), 755-765; 1981, Warrendale, PA, TMS.
148. R. A. J. KARPPI, J. RUUSILA, M. TOYODA, K. SATOH, and K. VARTIAINEN: Stand. J. Metall., 1984, 13, 66-74.
149. TH. BOELLINGHAU, H. HOFFMEISTER, and A. SCHWAGER: in 'Mathematical modelling of weld phenomena 3', 624-651; 1997, London, The Institute of Materials.
150. I. K. POKHODNYA: in 'Hydrogen management in steel weldments', (ed. J. L. Davidson and D. L. Olson), 145-181; 1996, Melbourne, Defense Science and Technology Organization (DSTO)/Welding Technology Institute of Australia (WTIA).
151. M. MATSUSHITA and S. LIU: Weld. J., 2000, 79, (10), 295s-303s.
152. S. TRUBE: Weld. Cut., 1996, 7, 8-14.
153. V. D. TRALINSKI, N. P. SBARSKAYA, and R. L. LAUFER: Avtom. Svarka, 1974, 6, 16-18.
154. O. I. SLEPTSOV, V. E. MIKHAILOV, and O. V. SMIJAN: IIW-Document IX-B-179-89, American Council, AWS, Miami, FA, 1989.
155. R. O. SMITH II, D. L. OLSON, T. R. WILDEMAN, D. K. BENSON, and G. P. LANDIS: Proc. Int. Conf. Materials Solution '99: 'Joining of advanced and specialty materials II', 275-283; 1999, Materials Park, OH, ASM International.
156. B. A. B. ANDERSSON: J. Eng. Mater. Technol., 1980, 102, 64-72.
157. M. CLARK, G. R. EDWARDS, and A. LANDAU: Proc. 5th Int. Conf. on 'Trends in welding research', 173-178; 1998, Materials Park, OH, ASM International.
158. Y. SAKUMA, D. K. MATLOCK, and G. KRAUSS: in 'Development in the annealing of sheet steels', (ed. R. Pradhan and I. Gupta), 321-337; 1992, Warrendale, PA, TMS.
159. I. MAROEF, C. LENSING, Y. D. PARK, A. LANDAU, and D. L. OLSON: Proc. Int Conf. Materials Solution '99: 'Joining of advanced and specialty materials II', 284-291; 1999, Materials Park, OH, ASM International.
160. Y. D. PARK, A. LANDAU, D. L. OLSON, I. MAROEF, and G. R. EDWARDS: Proc. 5th Int. Conf. on 'Trends in welding research', 31-36; 1998, Materials Park, OH, ASM International.
161. J. SHIMOMURA, Y. NAKANO, S. NAKANO, and s. UEDA: ISIJ Int., 1991, 31, (4), 379-386.
162. G. L. SPENCER and D. J. DUQUETTE: PhD thesis, 'The role of vanadium carbide traps in reducing the susceptibility to hydrogen embrittlement of high strength alloy steels', Troy, NY, Rensselaer Polytechnic Institute, May 1997.
163. J. F. LANCASTER: 'Metallurgy of welding', 5th edn; 1993, London, Chapman and Hall.
164. D. W. OH, D. L. OLSON, and R. H. FROST: Trans. ASME, 1994, 116, 26-31.
165. K. Y. LEE, J. Y. LEE, and D. R. KIM: Mater. Sci. Eng., 1984, 67, 213-220.
166. J. L. LEE and J. Y. LEE: Metall. Trans. A, 1986, 17A, 2183-2186.
167. F. MATSUDA, H. NAKAGAWA, K. SHINOZAKI, and H. KITANA: Trans. JWRI, 1977, 6, (2), 59-73.
168. F. MATSUDA, H. NAKAGAWA, K. SHINOZAKI, and T. MATSUMOTO: Trans. JWRI, 1985, 14, (2), 135-142.
169. K. SHINOZAKI, X. WANG, and T. H. NORTH: Metall. Trans. A, 1990, 21A, 1287-1298.
170. D. J. ABSON and R. J. PARGETER: Int. Mater. Rev., 1986, 31, 141-194.
171. E. SCHIAPPARELLI, S. PRADO, J. J. TIEBAS, and J. GARIBALDI: J. Mater. Sci., 1992, 27, 2053-2060.
172. E. PICKERING: J. Iron Steel Inst., 1958, 189, 148-159.
173. S. RUDNIK: J. Iron Steel Inst., 1966, 204, 374-376.
174. T. V. VENKATASUBRAMANIAN and T. J. BAKER: Met. Sci., 1982, 16, 543-554.
175. Y. KIKUTA, T. ARAKI, and A. HIROSE: Trans. Jpn Weld. Soc., 1988, 19, (1), 60-65.
176. S. M. LEE and J. Y. LEE: Acta Metall., 1987, 35, 2695-2700.
177. M. Iino: Metall. Trans., 1987, 18A, 1559-1564.
178. T. WATANABE: Trans. Jpn Weld. Soc., 1988, 19, (1), 34-39.
179. T. J. BAKER: J. Iron Steel Inst., 1973, 211, (11), 783-791.