Design and voltage supply of high-speed induction machines

Acta Polytechnica Scandinavica, Electrical Engineering

Volumn , Issue 108, 2002, Pages 1-128

  Lähteenmäki, Jussi ^a  

^a AALTO UNIVERSITY   (Finland)

Author keywords

Circulatory currents; High speed induction machine; Optimization; PAM; PWM; Rotor design; Voltage modulation

Indexed keywords

COMPUTER SOFTWARE; COPPER; ELECTRIC POWER SUPPLIES TO APPARATUS; ELECTROMAGNETIC FIELD THEORY; FINITE ELEMENT METHOD; INDUCTANCE; MACHINE DESIGN; OPTIMIZATION; PULSE AMPLITUDE MODULATION; PULSE WIDTH MODULATION; ROTORS (WINDINGS); STEEL;

CIRCULATORY CURRENTS; COPPER COATED SOLID STEEL ROTOR; HIGH-SPEED INDUCTION MACHINES; ROTOR DESIGN; SQUIRREL CAGE SOLID STEEL ROTOR; VOLTAGE MODULATION;

ASYNCHRONOUS MACHINERY;

EID: 0036921159     PISSN: 00016845     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (61)

1. Arkkio A. 1987. Analysis of Induction Motor Based on the Numerical Solution of the Magnetic Field and Circuit Equations. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 59. Helsinki, Finland. 97 p.
2. Bertotti G., Boglietti A., Chiampi M., Chiarabaglio D., Fiorillo F. and Lazzari M. 1991. An Improved Estimation of Iron Losses in Rotating Electrical Machines. IEEE Transaction on Magnetics. Vol. 27, No. 6, November. pp. 5007 - 5009
3. Bianchi N., Bolognani S. and Zigliotto M. 1996. Fuzzy Knowledge Based Design of PM Synchronous Motors. International Conference on Electrical Machines ICEM '96. Conference Proceedings, Vigo, Spain. Vol. 2, pp. 365 - 369
4. Bianchi N. and Bolognani, S. 1998. Design Optimisation of Electric Motors by Genetic Algorithms. IEE Proceedings of Electric Power Applications. Vol. 145. No. 5. September. pp. 475 - 483
5. Bianchi N. and Bolognani S. 1999. Design Optimisation of Electrical Motors by an Adaptive Model Based Optimisation Technique. Ninth International Conference on Electrical Machines and Drives. Conference Publication No. 468, IEE. pp. 291 - 296
6. Boglietti A., Ferraris P., Lazzari M. and Profumo F. 1988. Preliminary Considerations About the Adoption of Unconventional Magnetic Materials and Structures for Induction Motors. IEEE IAS meeting. Vol. 1, pp. 188 - 194
7. Boglietti A., Ferraris P., Lazzari M. and Profumo F. 1992. About the Design of Very High Speed Induction Motors for Spindle Applications. IEEE IAS-meeting. pp. 25 - 32
8. Boglietti A. 1999. A First Approach for the Iron Losses Building Factor Determination. IEEE IAS meeting. Vol. 1. pp. 489 - 493
9. Chalmers B. and Williamson A. 1991. A.C. Machines: Electromagnetics and Design. Research Studies Press LTD. Taunton, UK. 165 p.
10. Driesen J., Pahner U., Belmans R. and Hameyer K. 2000. Transient Coupled Magnetic Thermal Analysis of a Permanent Magnet Synchronous Electrical Vehicle Motor. International Conference on Electrical Machines ICEM 2000. Proceedings. August 28-30. Espoo, Finland, Vol 1. pp. 343 - 347
11. Flack T. J. and Knight R. E. 2000. Prediction of the Performance of Large Induction Motors Including the Effect of Radial Ventilation Ducts Using 2-D and 3-D finite-element Formulations. International Conference on Electrical Machines ICEM 2000. Proceedings. August 28-30. Espoo, Finland, Vol 1. pp. 372 - 376
12. Foelsch K. 1936. Magnetfeld und Induktivität einer zylindrischen Spule. Archiv für Elektrotechnik. Vol. 30. No. 3. pp. 139 - 157. (In German)
13. Fuchs E. F. and Frank U. V. 1983a. High-Speed Motors with Reduced Windage and Eddy Current Losses, Part I: Mechanical Design. ETZ Archiv. Bd. 5, H. 1. pp. 17 - 23
14. Fuchs E. F. and Frank U. V. 1983b. High-Speed Motors with Reduced Windage and Eddy Current Losses, Part II: Magnetic Design. ETZ Archiv. Bd. 5, H. 2. pp. 55 - 62
15. Gilon D. C. 1994. Cooling Solutions for High-Speed High-Power Induction Motors. International Conference on Electrical Machines ICEM '94. Conference Proceedings. Paris, France. Vol. 3. pp. 516 - 521
16. Holtz J. 1994. Pulsewidth Modulation for Electronic Power Conversion. Proceedings of IEEE. Vol. 82, No. 8, August. pp. 1194 - 1214.
17. Huppunen J. and Pyrhönen J. 2000. Filtered PWM-inverter Drive for High-Speed Solid-Rotor Induction Motors. Conference Record of the 2000 IEEE Industry Applications Conference, Vol. 3. pp. 1942 - 1949
18. IEC Standard 34-1. 1994. Rotating Electrical Machines - Part 1: Rating and performance. Ninth edition. International Electrotechnical Commission. Geneva, Switzerland. 129 p.
19. Ikeda M., Sakabe S. and Higashi K. 1990. Experimental Study of High Speed Induction Motor Varying Rotor Core Construction. IEEE Transactions on Energy Conversion. Vol. 5, No. 1, March. pp. 98 - 103
20. Ito M., Arai K., Takahashi N., Kiwaki H. and Seya T. 1988. Magnetically Anisotropic Solid Rotor of an Induction Motor. IEEE Transactions on Energy Conversion. Vol. 3, No. 2, June. pp. 427 - 432
21. Jokinen T. 1982. Pyörivän sähkökoneen suunnitteleminen. TKK Offset. Espoo, Finland. 72 p. (in Finnish)
22. Jokinen T. and Arkkio A. 1996. High-Speed AC Motors. Symposium on Power Electronics, Industrial Drives, Power Quality, Traction System, (Speedam '96). Proceedings. Capri, Italy. June 5th-7th. pp. B5-9-B5-14
23. Jokinen T. and Saari J. 1997. Modelling of the Coolant Flow with Heat Flow Controlled Temperature Sources in Thermal Networks. IEE proceedings on Electric Power Applications. Vol. 144, No. 5, September. pp. 338 - 342
24. Kaga A., Anazawa Y., Akagami H., Watabe S. and Motohiko M. 1982. A Research of Efficiency Improvement by Means of Soft Ferrite in Small Induction Motors. IEEE Transactions on Magnetics. vol. Mag-18, No 6, November, pp. 1547 - 1549
25. Kytömäki R., Arkkio A., Niemenmaa A. and Suontausta A. 1997. Validity of Conventional and Modern Methods of No-Load Loss Calculation in Asynchronous Machines-Statistic approach. IEE Conference on Electrical Machines and Drives EMD '97. Proceedings, August 12 - 16, Cambridge, UK. pp. 185 - 189
26. Lähteenmäki J. 1997. Optimisation of High-Speed Motors Using a Genetic Algorithm. IEE Conference on Electrical Machines and Drives EMD '97. Proceedings, August 12 - 16, Cambridge, UK. pp. 26 - 30
27. Lähteenmäki J., Arkkio A., Soitu V. and Saari J. 1999. Comparison of a Partly Laminated Squirrel Cage Rotor and a Copper-Coated Solid Steel Rotor for a 50 kW High-Speed Compressor. The Third Chinese International Conference on Electrical Machines. Proceedings., August 29 - 31, Xi'an, P. R. China. Vol 1. pp. 25 - 28
28. Lähteenmäki J. K. and Soitu V. 2000. Comparison of Solid Steel Rotors with a Copper Coating or with a Copper Cage for a 60 kW 60.000 RPM Compressor. International Conference on Electrical Machines ICEM 2000. Proceedings. August 28 - 30. Espoo, Finland, Vol 2. pp. 623 - 626
29. Lampola P. 2000. Directly Driven, Low-Speed Permanent-Magnet Generators for Wind Power Applications. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 101. Espoo, Finland. 62 p (+106p.).
30. Lantto E. 1997. Finite Element Model for Elastic Rotating Shaft. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 88. Espoo, Finland. 73 p.
31. Lantto E. 1999. Robust Control of Magnetic Bearings in Subcritical Machines. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 94. Espoo, Finland. 143 p.
32. Lantto E. 2002. Active Magnetic Bearings. Design of High-Speed Electrical Machines, Postgraduate Seminar on Electromechanics. Helsinki University of Technology, Laboratory of Electromechanics. 20 - 26.5.2002, Espoo, Finland.
33. Lindell I. 1994. Sähkötekniikan Historia. Otatieto Oy. Publication No: 552. Tampere, Finland. 516 p. (In Finnish)
34. Meeker D. 1999. Finite Element Method Magnetics, User's Manual. Http://members.aol.com/dcm3c. August 25. 51 p.
35. Mekhiche M., Kirtley J.L., Tolikas M., Ognibene E., Kiley J., Holmansky E. and Nimblett F. 1999. High Speed Motor Drive Development for Industrial Applications. International Conference on Electric Machines and Drives, IEMD '99. pp. 244 - 248
36. Mohan N., Undeland T. and Robbins W. 1995 Power Electronics: Converters, Applications, and Design. John Wiley & Sons Inc. USA. 802 p.
37. Palko S. 1996. Structural Optimization of an Induction Motor using a Genetic Algorithm and a Finite Element Method. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 84. Helsinki, Finland. 99 p.
38. Patent FI 100749. Epätahtikoneen roottorissa käytettävä levyroottorirakenne. High Speed Tech Oy Ltd, Tampere, Finland. 13.2.1998, 16 p. (In Finnish)
39. Patent US 5473211. Asynchronous Electric Machine and Rotor and Stator for Use in Association therewith. High Speed Tech Oy Ltd, Tampere, Finland. Appl. No 86880, 7.7.1992, 9 p.
40. Pyrhönen J. and Kurronen P. 1993. Massiiviroottorisen Suurnopeusoikosulkumoottorin Hyötysuhteen Parantaminen, Osa 3, Loppuraportti. Tutkimusraportti EN B-80 LTKK. Energiatekniikan osasto, Lappeenrannan Teknillinen Korkeakoulu. 16 p. (In Finnish)
41. Pyrhönen J. and Kurronen P. 1994. Increasing the Efficiency of High-Speed Solid-Rotor Induction Machines. International Conference on Electrical Machines ICEM '94. Conference Proceedings. Paris, France. Vol. 1, pp. 47-52
42. Pyrhönen J. and Huppunen J. 1996. A New Medium Speed Solid Induction Motor for A High-Speed Milling Machine. Symposium on Power Electronics, Industrial Drives, Power Quality, Traction System, (Speedam '96). Proceedings. Capri, Italy. June 5-7. pp. B5-1-B5-7
43. Rajagopalan P. K. and Balarama Murty V. 1969. Effects of Axial Slits on the Performance of Induction Machines with Solid Iron Rotors. IEEE Transactions on Power Apparatus and Systems. Vol. PAS-88, No. 11, November. pp. 1695-1709
44. Reichert K. and Pasquarella G. 1995. High Speed Electric Machines, Status, Trends and Problems. Stockholm Power Tech Conference. Proceedings. June 18-22. Stockholm, Sweden. pp. 41-49
45. Richter R. 1951. Elektrische Maschinen I, Allgemeine Berechnungselemente Die Gleichstrommaschinen. Zweite verbesserte Auflage. Verlag Birkhäuser. Basel, Switzerland. 630 p. (In German)
46. Saari J. and Arkkio A. 1994. Losses in High-Speed Asynchronous Motors. International Conference on Electrical Machines ICEM '94. Conference Proceedings. Paris, France. Vol. 3. pp. 704-708.
47. Saari J. 1995. Thermal Modelling of High-Speed Machines. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 82. Helsinki, Finland. 82 p.
48. Saari J. and Arkkio A. 1995. Cooling of a 100.000 RPM High-Speed Electrical Motors. The Second Chinese International Conference on Electrical Machines CICEM '95. Conference Proceedings. Hangzhou, China. pp. 317-322
49. Saari J. 1998. Thermal Analysis of High-Speed Induction Machines. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 90. Helsinki, Finland. 73 p.
50. Schmied J. 1990. Experience with Magnetic Bearings Supporting a Pipeline Compressor. 2nd International Symposium on Magnetic Bearings. Proceedings. Tokyo, Japan. pp. 47-55
51. Shanel M., Pickering S. J. and Lampard D. 2000. Application of Computational Fluid Dynamics to the Cooling of Salient Pole Electrical Machines. International Conference on Electrical Machines ICEM 2000. Proceedings. August 28-30. Espoo, Finland, Vol 1. pp. 338-342
52. Sharma N. D., Anbarasu R., Nataraj J., Dangore A. Y. and Bhattacharjee B. 1996. Experimental Investigations on High Speed Solid and Composite Rotor Induction Motor. International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth. Proceedings. Vol. 2. New York, New York, USA. pp. 913-919
53. Siegwart R., Larsonneur R. and Traxler A. 1990. Design and Performance of High Speed Milling Spindle in Digitally Controlled AMB's. 2nd International Symposium on Magnetic Bearings. Proceedings. Tokyo, Japan. pp. 197-204
54. Smith A. C., and Edey K. 1995. Influence of Manufacturing Processes on Iron Losses. Seventh International Conference on Electrical Machines and Drives EMD '95. Conference Publication No. 412, IEE. pp. 77-81
55. Soong W. L., Kliman G. B., Johnson R. N., White R. A. and Miller J. E. 2000. Novel High-Speed Induction Motor for a Commercial Centrigual Compressor. IEEE Transactions on Industry Applications. Vol. 36, No. 3, May/June. pp. 706-713
56. Surahammars Bruk. 1998. Non-oriented Fully Processed Electrical Steels. Product catalogue, Surahammars Bruks AB, Sweden
57. Szücs Á. 2001. Macro Element Method for Modeling Eddy Currents in the Multi-Conductor Windings of Electrical Machines. Acta Polytechnica Scandinavica, Electrical Engineering Series No. 106. Espoo, Finland. 88 p.
58. Takahashi I., Koganezawa T., Su G. and Ohyama K. 1994. A Super High Speed PM Motor Drive System by a Quasi-Current Source Inverter. IEEE Transactions on Industry Applications. Vol. 30, No. 3. May/June. pp. 683-690
59. Viggiano F. and Schweitzer G. 1992. Active Magnetic Support and Design of High Speed Rotors for Powerful Electric Drives. Third International Symposium on Magnetic Bearings. Proceedings. July 29-31. Alexandria, Virginia, USA. pp. 549-558
60. Wood B. M., Olsen C. L., Hartzo G. D., Rama J. C. and Szenasi F. R. 1997. Development of an 11000-r/min 3500-HP Induction Motor and Adjustable-Speed Drive for Refinery Service. IEEE Transactions on Industry Applications. Vol. 33, Issue 3, May-June. pp. 815-825
61. Zach F. 1989. Comparison of Voltage and Current Spectra Using Optimized Forms of Inverter Pulsewidth Modulation. IEE Transactions on Power Electronics. Vol. 4, No. 1. pp. 64-72