State-of-the-art review of erosion modeling in fluid/solids systems

Progress in Energy and Combustion Science

Volumn 28, Issue 6, 2002, Pages 543-602

  Lyczkowski, Robert W ^a   Bouillard, Jacques X ^b  

^a ARGONNE NATIONAL LABORATORY   (United States)

^b INERIS   (France)

Author keywords

Computational fluid dynamics; Discrete element method; Erosion; Fluidized beds; Hydrodynamics; Kinetic theory

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; EROSION; FINITE DIFFERENCE METHOD; HYDRODYNAMICS; KINETIC THEORY;

MONOLAYER ENERGY DISSIPATION (MED);

FLUIDIZED BED COMBUSTION;

EID: 0036901929     PISSN: 03601285     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0360-1285(02)00022-9     Document Type: Review

References (143)

1. Kunii D., Levenspiel O. Fluidization engineering. 2nd ed.: 1991;Butterworth/Heinemann, Stoneham.
2. Beer J.M. Combustion technology developments in power generation in response to environmental challenges. Prog Energy Combust Sci. 2000;301-327.
3. Erlich S. Conference Preprints, Third International Fluidized Combustion Conference. vol. 2:October 1984;The Institute of Energy, London. KA/1/1-KA/1/29.
4. Beer J.M. Sixteenth Symposium (International) on Combustion. 1976 ;The Combustion Institute, Pittsburgh. p. 439-60.
5. Fennelly P.F. Fluidized bed combustion. Am Scientist. 72:1984;254-261.
6. Schwieger R. Fluidized-bed boilers achieve commercial status worldwide. Power. 129:(2):1985;S1-S16.
7. Krishnan R.P., Daw C.S., Jones J.E. Jr. A review of fluidized bed combustion technology in the United States. van Swaaij W.P.M., Afgan N.H. Heat and mass transfer in fixed and fluidized beds. 1985;433-455 Hemisphere, Washington, DC.
8. Stringer J., Wright I. Overview of in-bed erosion in fluidized-bed combustors. Materials and Components in Fossil Energy Applications, US Department of Energy Report DOE/FE-0054/54; February 1, 1985.
9. NCB (IEA Grimethorpe) Ltd. Incident Report Tube Bank 'C' - Metal Wastage Status Report, November 1982. US Department of Energy Report DOE/METC-83-54 (DE83008239); November 1982.
10. Kobro H. Conference Preprints, Third International Fluidized Combustion Conference. Conference Preprints, Third International Fluidized Combustion Conference. vol. 1:1984;The Institute of Energy, London. DISC/14/110-DISC/14/120.
11. Xu-Yi Z. The progress of fluidized-bed boilers in People's Republic of China. Proceedings of the Sixth International Conference on Fluidized Bed Combustion. US Department of Energy Report CONF-800428, vol. 1; 1980. p. 36-40.
12. Stringer J., Wright I. Materials issues in fluidized bed combustion. Presented at ASM Conference on Materials for Future Energy Systems, Washington, DC; May 1984. [Ref. [8] is an abstract of this paper.].
13. Grace J.R. Agricola aground: characterization and interpretation of fluidization phenomena. Weimer A.J. AIChE Symposium Series No. 289. AIChE Symposium Series No. 289. vol. 88:1992;1-16 American Institute of Chemical Engineers, New York.
14. Tarmy B.L., Coulaloglu C.A. Alpha-omega and beyond industrial view of gas/liquid/solid reactor development. Chem. Engng. Sci. 47:1992;3231-3246.
15. Dellenback P.A., Johansen W.R. Surface pressure and wear characteristics of tubes submerged in bubbling fluid beds. Powder Technol. 115:2001;298-311.
16. Jansson S.A. Erosion and erosion-corrosion in fluidized bed combustor systems. Levy A.V. Proceedings on Corrosion-Erosion-Wear of Materials in Emerging Fossil Energy Systems. 1982;548-560 National Association of Corrosion Association Engineers, Houston.
17. Volpicelli G., Massimilla L., Zenz F.A. Nonhomogeneities in solid-liquid fluidization. Buckham J.A., Levitz N.M. CEP Symposium Series. CEP Symposium Series. vol. 62(67):1966;42-50 American Institute of Chemical Engineers, New York.
18. Loew O., Schmutter B., Resnick W. Particle and bubble behavior and velocities in a large-particle fluidized bed with immersed obstacles. Powder Technol. 22:1979;45-57.
19. Merry J.M.D., Davidson J.F. Gulf stream circulation in shallow fluidized beds. Trans Inst Chem Engr. 51:1973;361-368.
20. Patrose B., Caram H.S. Optical fiber probe transit anemometer for particle velocity measurements in fluidized beds. AIChE J. 28:(4):1982;604-609.
21. Lin J.S., Chen M.M., Chao B.T. A novel radioactive particle tracking facility for measurement of solids motion in fluidized beds. AIChE J. 31:(3):1985;465-473.
22. Lyczkowski R.W., Gamwo I.K., Dobran F., Ai Y.H., Chao B.T., Chen M.M., Gidaspow D. Validation of computed solids hydrodynamics and pressure oscillations in a model bubbling atmospheric fluidized bed combustor. Powder Technol. 76:(1):1993;65-77.
23. Rowe P.N., Masson H. Intersection of bubbles with probes in gas fluidized beds. Trans. Inst. Chem. Engr. 59:1981;176-185.
24. Rowe P.N., Everett D.J. Fluidized bed bubble viewed by X-rays. Part I. Experimental details and the interaction of bubbles with solid surfaces. Trans Inst Chem Engr. 50:1972;42-48.
25. Fakhimi S., Harrison D. The void fraction near a horizontal tube immersed in a fluidized bed. Trans. Inst. Chem. Engr. 58:1980;125-131.
26. Davidson J.F. Symposium on fluidization - discussion. Trans. Inst. Chem. Engr. 39:1961;230-232.
27. Smoot L. Modeling of coal-combustion processes. Prog. Energy Combust. Sci. 10:(2):1984;229-272.
28. Gidaspow D. Hydrodynamics of fluidization and heat transfer: supercomputer modeling. Twenty-Third Nat. Heat Transfer Conf. Appl. Mech. Rev. 39:(1):1986;1-23.
29. Lyczkowski R.W., Bouillard J.X., Folga S.M. Users manual for FLUFIX/MOD2: a computer program for fluid-solids hydrodynamics. Argonne National Laboratory Sponsor Report, Argonne, IL (April 1992). Reprinted by USDOE METC as DOE/MC/24193-3491/NTIS No. DE94000033), available from NTIS, Springfield, VA; 1994.
30. Gidaspow D., Ettehadieh B. Fluidization in two-dimensional beds with a jet. 2. Hydrodynamic modeling. I&EC Fundam. 22:1983;187-193.
31. Bouillard J.S., Lyczkowski R.W., Gidaspow D. Porosity distributions in a fluidized bed with an immersed obstacle. AIChE J. 35:(6):1989;908-922.
32. Bouillard J.X., Gidaspow D., Lyczkowski R.W. Hydrodynamics of fluidization: fast bubble simulation in a two-dimensional fluidized bed. Powder Technol. 66:1991;107-118.
33. Lyczkowski R.W., Gamwo I.K., Gidaspow D. Analysis of flow in a non-aerated hopper containing a square obstacle. Powder Technol. 112:2000;57-62.
34. Gidaspow D. Multiphase flow and fluidization, continuum and kinetic theory descriptions. 1994;Academic Press, San Diego, CA.
35. Enwald H., Peirano E., Almstedt A.E. Eulerian two-phase flow theory applied to fluidization. Int J Multiphase Flow. 22:(Suppl. 21):1996;21-66.
36. Rivard WC, Torrey MD. K-FIX: a computer program for transient, two-dimensional, two-fluid flow. Los Alamos Scientific Laboratory Report LA-NUREG-6623; April 1977.
37. Bouillard J.S., Lyczkowski R.W., Folga S., Gidaspow D., Berry G.F. Hydrodynamics of erosion of heat exchanger tubes in fluidized-bed combustors. Can J Chem. Engng. 67:1989;218-229.
38. Harlow F.H., Amsden A.A. Numerical calculation of multiphase fluid flow. J Comput. Phys. 17:1975;19-52.
39. Lyczkowski R.W., Gidaspow D., Solbrig C.W., Hughes E.C. Characteristics and stability analyses of transient one-dimensional two-phase flow equations and their finite difference approximations. Nucl. Sci. Engng. 66:1978;378-396.
40. Rietma K., Mutsers S.M.P. The effect of interparticle forces on expansion of a homogeneous gas-fluidization. Proceedings of the International Symposium on Fluidization, Toulouse, France; 1973. p. 32-3.
41. Panelli R., Filho F.A. A study of a new phenomenological compacting equation. Powder Technol. 114:2001;255-261.
42. Shinora K. Rheological property of particulate solids. Fayed M.E., Otten L. Handbook of powder science and technology. 1984;129-169 Van Nostrand Reinhold, New York.
43. Gidaspow D, Syamlal M. Solid-gas critical flow. Presented at the 1985 Annual Meeting, AIChE, Paper 74e; November 1985.
44. Altiner H.K., Davidson J.F. Powder flow from an aerated hopper. Grace J.R., Madsen J.M. Fluidization. 1980;461-468 Plenum Press, New York, NY.
45. Guenther C., Syamlal M. The effect of numerical diffusion on simulation of isolated bubbles in a gas-solid fluidized bed. Powder Technol. 116:2001;142-154.
46. Ivanov V.A., Vasquez S.A. A pressure-based method to solve granular multiphase flows on unstructured meshes. Paper 895 presented at ICMF-2001, Fourth International Conference on Multiphase Flow; May 27-June 1 2001.
47. Gidaspow D., Lin C.L., Seo Y.C. Fluidization in two-dimensional beds with a jet. 1. Experimental porosity distributions. I&EC Fundam. 22:1983;187-193.
48. Buyevich Y.A., Korolyov V.N., Syromyatnikov N.I. Hydrodynamic conditions for the external heat exchange in granular beds. van Swaaij W.P.M., Afghan N.H. Heat and mass transfer in fixed and fluidized beds. 1986;333-342 Hemisphere, Washington, DC.
49. Humphrey J.A.C. Fundamentals of fluid motion in erosion by solid particle impact. Int. J Heat Fluid Flow. 11:1990;170-195.
50. Engel P.A. Impact wear of materials. 1978;Elsevier, Amsterdam.
51. Sarkar A.D. Friction wear. 1980;Academic Press, New York.
52. Meng H.C., Ludema K.C. Wear models and predictive equations: their form and content. Wear. 181-183:1995;443-457.
53. Padhye A.R. Literature review of fundamental erosion/abrasion models as applicable to wear of fluidized bed internals. Topical Report, EG&G WASC, Inc., Morgantown, W.Va; December 1985.
54. Finnie I. Proceedings of the Third National Congress on Applied Mechanics. Proceedings of the Third National Congress on Applied Mechanics. 1958;American Society of Mechanical Engineers, New York. p. 527-32.
55. Finnie I. Erosion of surfaces by solid particles. Wear. 3:1960;87-103.
56. Pourahmadi F., Humphrey J.A.C. Modeling solid-fluid turbulent flows with application to predicting erosion wear. Physico Chem Hydrodyn. 4:(3):1983;191-219.
57. Finnie I. Some observations on the erosion of ductile metals. Wear. 19:1972;81-90.
58. Finnie I., McFadden D.H. On the velocity dependence of ductile metals by solid particles at low angles of incidence. Wear. 48:1978;181-190.
59. Shewmon P., Sundararajan G. The erosion of metals. Annu. Rev. Mater. Sci. 13:1983;303-318.
60. Bitter J.G.A. A study of erosion phenomena, Part I. Wear. 6:1963;5-21.
61. Bitter J.G.A. A study of erosion phenomena, Part II. Wear. 8:1963;161-190.
62. Neilson J.H., Gilchrist A. Erosion by a stream of solid particles. Wear. 11:1968;111-122.
63. Sheldon G.L., Finnie I. The mechanism of material removal in the erosive cutting of brittle materials. Trans. ASME, Ser. 13, J Engng. Ind. 88:1966;393-400.
64. Soo S.L. A note on moving dust particles. Powder Technol. 17:1977;259-263.
65. Wood R.T., Woodford D.A. Tube erosion in fluidized beds. General Electric Co. Report 11/ET-FUC79. US Energy Research and Development Administration Report 81-12; December 1980.
66. Fiore N.F., Anthony N.C., Kosel T.H. Abrasion in multi phase alloys. Levy A.V. Proceedings on Corrosion-Erosion-Wear of Materials in Emerging Fossil Energy Systems, Berkeley, CA, January 17-19, 1982. 1982;266-294 National Association of Corrosion Engineers, Houston.
67. Hutchings I. Some comments on the theoretical treatment of erosive particle impacts. Paper No. 36, Proceedings of the Fifth International Conference on Erosion by Liquid and Solid Impact, Cambridge, England; September 1979.
68. Wood RT, Woodford DA. Tube erosion in fluidized beds. Paper No. 42, Proceedings of the Fifth International Conference on Erosion by Liquid and Solid Impact, Cambridge, England; September 1979.
69. Gansley R.R., O'Brien T.J. A model for bubble-induced erosion in fluidized-bed combustors and comparison with experiment. Wear. 137:1990;107-127.
70. Tabakoff W. Effect of environmental particles on a radial compressor. Levy A.V. Proceedings on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, Berkeley, CA, January 31-February 2, 1990. 1991;26.1-26.28 National Association of Corrosion Engineers, Houston, TX.
71. Wolak J., Worm P., Patterson I., Bodia J. Parameters affecting the velocity of particles in an abrasive jet. Trans. ASME, J Engng. Mater. Technol. 99:1977;147-152.
72. Tsai W., Humphrey J.A.C., Cornet I., Levy A.V. Experimental measurement of accelerated erosion in a slurry pot tester. Wear. 68:1981;289-303.
73. Hussain M.F., Tabakoff W. Computation and plotting of solid particulate flow in rotating cascades. Comput. Fluids. 2:1974.
74. Grant G., Tabakoff W. Erosion predictions in turbomachinery resulting from environmental solid particles. J Aircraft. 12:1975;642-676.
75. Tabakoff W. Erosion behavior of materials in multiphase flow. Levy A.V. Proceedings on Corrosion-Erosion-Wear of Materials in Emerging Fossil Energy Systems, Berkeley, CA, January 17-19 1982. 1982;642-676 National Association of Corrosion Engineers, Houston.
76. Stringer J. Electric Power Research Institute, Palo Alto, CA. Personal communication; October 25, 1985.
77. Sheldon G.L., Maji J., Crowe C.T. Erosion of a tube by gas particle flow. Trans ASME, Ser. H, J Engng. Mater. Technol. 99:1977;138-142.
78. Crowe C.T., Sharma M.P., Stock D.E. The particle-source-in cell (PSI-cell) model for gas-droplet flows. J Fluids Engng. 99:1977;325-332.
79. Rudinger G., Chang A. Analysis of non-steady two-phase flow. Phys. Fluids. 7:1964;1747-1754.
80. Gosman A.D., Pun W.M. Calculation of recirculating flows (Lecture notes). Imperial College, London, Report HTS/74/2; 1974.
81. Mason J.S., Smith B.V. The erosion of beds by pneumatically conveyed suspensions of abrasive particles. Powder Technol. 6:1972;323-335.
82. Ushimaru K., Crowe C.T., Bernstein S. Design and applications of the novel slurry jet pump. Energy International, Inc., Report EI84-108; October 1984.
83. Kick F. Dar Gesetz der proportionalen Widerstande und seine Anwendung. 1885;Leipzig, Germany.
84. Walker D.R., Shaw M.C. A physical explanation of the empirical laws of comminution. AIME Mining Engng. Trans. 6:1954;313-320.
85. Rabinowicz E. Friction and wear of materials. 1965;Wiley, New York.
86. Shook C.A., Ghosh S.R., Pilling F.E. Wall erosion in slurry couette flow. Roco M.C. Liquid-solid flows and erosion wear in industrial equipment. 1983;63-68 American Society of Mechanical Engineers, New York.
87. Bouillard J.X., Lyczkowski R.W. On the erosion of heat exchanger tube banks in fluidized beds. Powder Technol. 68:1991;37-51.
88. Mulhearn T.O., Samuels L.E. The abrasion of metals: a model of the process. Wear. 5:1962;478-498.
89. Von Rittinger P.R. Lehrbuch der Aufbereitungskunde. 1867;Ernstand Korn, Berlin.
90. Bird R.B., Stewart W.E., Lightfoot E.N. Transport phenomena. 3rd ed.: 1960;Wiley, New York.
91. Lyczkowski RW, Bouillard JX, Gidaspow D, Berry GF. Computer modeling of erosion in fluidized beds. Argonne National Laboratory Report ANL/ESD/TM-1, Argonne, IL, July 1986; January 1990.
92. Lyczkowski RW, Bouillard JX. Interim User's manual for FLUFIX/MOD1: a computer program for fluid-solids hydrodynamics. Argonne National Laboratory, ANL/EES-TM-361, Argonne, IL, October 1986 (published February 1989).
93. Lyczkowski R.W., Bouillard J.X., Chang S.L., Folga S.M. User's manual for EROSION/MOD1: a computer program for fluid solids erosion. Argonne National Laboratory Sponsor Report, Argonne, IL (April 1992). Reprinted by USDOE METC as DOE/MC/24193-3500/NTIS No. 94000032. Available from NTIS, Springfield, VA; 1994.
94. Savage S.B. Granular flow at high shear rates. 1982;Academic Press, New York. p. 339-57.
95. Baumeister T. Mark's standard handbook got mechanical engineers. 7th ed.: 1967;McGraw Hill, New York.
96. Parkinson M.J., Jury A.W., Napier B.A., Kempton T.J., Holder J.C. Cold model erosion studies in support of pressurized fluidized bed combustion. Electric Power Research Institute Final Report for Project, 1337-2; April 1986.
97. Grace J.R. Hetsoroni G. Fluidized-bed hydrodynamics in handbook of multiphase systems. 1982;8.5-8.64 McGraw-Hill, New York, NY. chapter 8.1.
98. Parkinson M.J., Grainger J.F.G., Jury A.W., Kempton T.J. Tube erosion at IEA Grimethorpe: cold model studies at CRE. Reports Commissioned by the Project from Outside Consultants and Others, vol. 2, NCB (AEA Grimethorpe) Ltd., Barnsley, S. Yorkshire, UK; September 1984.
99. Zhu J. Tube erosion in fluidized beds. PhD Thesis. Department of Chemical Engineering, The University of British Columbia; May 1988.
100. Yates J.G. On the erosion of metals in fluidized beds. Chem Engng Sci. 42:(2):1987;379-380.
101. Darton R.C., Lanauze R.D., Davidson J.F., Harrison D. Bubble growth due to coalescence in fluidized beds. Trans Inst Chem Engng. 55:1977;274-280.
102. Parkinson M.J., Napier B.A., Jury A.W., Kempton T.J. Proceedings of the Eighth International Conference on Fluidized-Bed Combustion. Proceedings of the Eighth International Conference on Fluidized-Bed Combustion. vol. II:1985;National Technical Information Service, Springfield, VA. p. 730-8; DOE/METC-85/6021.
103. Zhu J., Lim C.J., Grace F.R., Lund J.A. Tube wear in gas fluidized beds. II. Low velocity impact erosion and semi-empirical model for bubbling and slugging fluidized beds. Chem Engng Sci. 46:(4):1991;1151-1156.
104. Zhu J., Grace R., Lim C.J. Tube wear in gas fluidized beds. I. Experimental findings. Chem Engng Sci. 45:(4):1990;1003-1015.
105. Foust A.S., Wenzel L.A., Clump C.W., Maus L., Andersen L.B. Principles of unit operations. 1960;Wiley, New York. Fig. B-12; p. 537.
106. Woodford A.A., Wood R.T. Effect of particle size and hardness on material erosion in fluidized beds. Proc 7th Int. Conf. Erosion Liquid Solid Impact. 56:1983;1-10.
107. British Coal Corporation, Coal Research Establishment. Minimizing erosion in coal-fired boilers. Commission of the European Communities Report EUR 12360EN, Contract No. 7220-ED/808. Final Report, Directorate-General, Telecommunications, Information Industries and Innovation, Luxembourg; 1989.
108. Podolski W.F., Lyczkowski R.W., Montrone E., Drennen J., Ai Y.H., Chao B.T. A study of parameters influencing metal wastage in fluidized bed combustors. Anthony E.J. Proceedings of the 11th International Conference on Fluidized Bed Combustion. vol. 2:1991;609-618 American Society of Mechanical Engineers, New York.
109. Lyczkowski RW, Bouillard JX. Scaling and guidelines for erosion in fluidized beds. Paper 935 presented at ICMF-2001, Fourth International Conference on Multiphase Flow; May 27-June 1, 2001.
110. Ding J., Lyczkowski R.W. Three-dimensional kinetic theory modeling of hydrodynamics and erosion in fluidized beds. Powder Technol. 73:1992;127-138.
111. Ding J., Gidaspow D. A bubbling model using kinetic theory of granular flow. AICHE J. 36:(4):1990;523-538.
112. Rogers W.A. The prediction of wear in fluidized beds. Trans ASME J Pressure Vessel Technol. 117:1995;142-149.
113. Cody G.D., Goldfarb D.J., Storch G.V. Jr., Norris A.N. Particle granular temperature in gas fluidized beds. Powder Technol. 87:1996;211-232.
114. Ding J. A fluidization model using kinetic theory of granular flow. PhD Thesis. Illinois Institute of Technology, Chicago; 1990.
115. Neri A., Gidspow D. Riser hydrodynamics: simulation using kinetic theory. AIChE J. 46:2000;52-67.
116. Wu Y., Gidaspow D. Hydrodynamic simulation of methanol synthesis in gas-liquid slurry bubble column reactors. Chem. Engng. Sci. 55:2000;573-587.
117. Drennen JF, Hocking WR, Howard DA. Particle motion at fluidized bed tube surfaces. Final Report prepared for Morgantown Energy Technology Center, Contract DE-AC21-86MC23034, Combustion Engineering, Inc., Windsor, CT; 1989.
118. Rong D., Mikami T., Horio M. Particle and bubble movements around tubes immersed in fluidized beds - a numerical study. Chem Engng Sci. 54:1999;5737-5754.
119. Rong D., Horio M. Behavior of particles and bubbles around immersed tubes in a fluidized bed at high temperature and pressure: a DEM simulation. Int. J Multiphase Flow. 27:2001;89-105.
120. Tsuji Y., Kawaguchi T., Tanaka T. Discrete particle simulation of two-dimensional fluidized bed. Powder Technol. 77:1993;79-87.
121. Tsuji Y. Activities in discrete particle simulation in Japan. Powder Technols. 113:2000;278-286.
122. Walton O, Braun RL. Simulation of rotary-drum and repose tests for frictional spheres and rigid sphere clusters. DOE/NSF Workshop on Flow of Particulates on Fluids, September 29-October 1, 1993, Proceedings. Available from NTIS, US Department Commerce, Springfield, VA; 1994. p. 131-48.
123. Joseph D.D. Lift correlations from direct numerical simulation of solid-liquid flow. Paper 385 presented at ICMF-2001, Fourth International Conference on Multiphase Flow; May 27-June 1, 2001.
124. Olsson S.E., Wiman J., Almstedt A.E. Hydrodynamics of a pressurized fluidized bed with horizontal tubes: influence of pressure, fluidization velocity and tube-bank geometry. Chem. Engng. Sci. 50:(4):1995;581-592.
125. Wiman J., Mahpour B., Almstedt A.E. Erosion of horizontal tubes in a pressurized fluidized bed-influence of pressure, fluidization velocity and tube-bank geometry. Chem. Engng. Sci. 50:(21):1995;3345-3356.
126. Wiman J. Hydrodynamics, erosion and heat transfer in pressurized fluidized beds. PhD Thesis. Chalmers University of Technology, Goteborg, Sweden; 1997.
127. Wiman J., Almstedt A.E. Hydrodynamics, erosion and heat transfer in a pressurized fluidized bed: influence of pressure, fluidization velocity and tube-bank geometry. Chem. Engng. Sci. 52:1997;2677-2695.
128. Gustavsson M., Almstedt A.E. Numerical simulation of fluid dynamics in fluidized beds with horizontal heat exchanger tubes. Chem. Engng. Sci. 55:2000;857-866.
129. Gustavsson M., Almstedt A.E. Two-fluid modelling of cooling-tube erosion in a fluidized bed. Chem Engng Sci. 55:2000;867-879.
130. Gustavsson M. Fluidized bed operating parameters and Eulerian erosion models. PhD Thesis. Chalmers University of Technology, Goteborg, Sweden; 2000.
131. Enwald H., Peirano E., Almstedt A.E., Leckner B. Simulation of the fluid dynamics of a bubbling fluidized bed. Experimental validations of the two-fluid model and evaluation of a parallel multiblock solver. Chem. Engng. Sci. 54:1999;311-328.
132. Enwald H., Almstedt A.E. Fluid dynamics of a pressurized fluidized bed: comparison between numerical solutions from two-fluid models with experimental results. Chem. Engng. Sci. 54:1999;329-342.
133. Johansson K, Magnusson A, Rundqvist R, Almstedt AE. Study of two gas-particle flows using Eulerian/Eulerian two-fluid models. Paper 329 presented at ICMF-2001, Fourth International Conference on Multiphase Flow; May 27-June 1, 2001.
134. Chang S.L., Lyczkowski R.W., Berry G.F. Spectral dynamics of computer-simulated, two-dimensional, few-tube fluidized-bed combustors. Int. J. Heat Mass Transfer. 34:1991;1773-1781.
135. Lyczkowski R.W., Bouillard J.X. State-of-the-art review and status of erosion modeling in fluid/solids systems. Levy A.V. Proceedings on Corrosion-Erosion-Wear of Materials at Elevated Temperatures, Berkeley, CA, January 31-February 2, 1990. 1991;27.1-27.66 National Association of Corrosion Engineers, Houston, TX.
136. Olowson P.A. Influence of pressure and fluidization velocity on the hydrodynamics of a fluidized bed containing horizontal tubes. Chem Engng Sci. 49:(15):1994;2437-2446.
137. Olowson P.A. Hydrodynamics of a fluidized bed - influence of pressure and fluidization velocity. PhD Thesis. Chalmers University of Technology, Goteborg, Sweden; 1991.
138. Olowson P.A., Almstedt A.E. Influence of pressure and fluidization velocity on the bubble behaviour and gas flow distribution in a fluidized bed. Chem. Engng. Sci. 45:(7):1990;1733-1741.
139. Enwald H. A numerical study of the fluid dynamics of bubbling fluidized beds. PhD Thesis. Chalmers University of Technology, Goteborg, Sweden; 1997.
140. Lyczkowski R.W., Folga S., Chang S.L., Bouillard J.X., Wang C.S., Berry G.F., Gidaspow D. State-of-the-art computation of dynamics and erosion in fluidized bed tube banks. Manakar A.M. Proceedings of the 10th 1989 International Conference on Fluidized Bed Combustion. vol. 1:1989;465-478 American Society of Mechanical Engineers, New York.
141. Lyczkowski R.W., Bouillard J.X., Berry G.F., Gidaspow D. Erosion calculations in a two-dimensional fluidized bed. Mustonen J.P. Proceedings of the Ninth 1987 International Conference on Fluidized-Bed Combustion. vol. 2:1987;697-706 American Society of Mechanical Engineers, New York.
142. Gustavsson M. Fluid dynamic mechanisms of particle flow causing ductile and brittle erosion. Wear. 252:2002;845-858.
143. Lyczkowski R.W., Folga S., Chang S.L., Bouillard J.X. Computational of dynamics and erosion for small tube arrays in fluidized beds. Fifth Miami International Symposium on Multiphase Transport and Particulate Phenomena, Miami Beach, FL; December 12-14, 1988. In: Veziroglu T.N., editor. Proceedings of Condensed Papers; 1988. p. 147-8. Veziroglu T.N., editor. Full paper in Multiphase Transport and Particulate Phenomena, vol. 3, New York: Hemisphere; 1990. p. 325-53.