Wear in boundary or mixed lubrication regimes

Tribology Series

Volumn 40, Issue , 2002, Pages 3-17

  Kato, Koji ^a  

^a TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

OIL; STEEL;

CERAMICS; COMPETITION; CONFERENCE PAPER; FILM; FRICTION; INTERMETHOD COMPARISON; IRON AND STEEL INDUSTRY; LUBRICATION; MATERIALS TESTING; MECHANICS; PARTICLE SIZE; PLASTIC INDUSTRY; SOLUBILITY; SURFACE PROPERTY; TRIBOLOGY;

EID: 0036882473     PISSN: 01678922     EISSN: None     Source Type: Book Series    
DOI: 10.1016/s0167-8922(02)80003-7     Document Type: Conference Paper

References (44)

1. M. Priest, D. Dowson and C.M. Taylor, Predictive wear modeling of lubricated piston rings in a diesel engine, Wear, 231 (1999) 89-101.
2. M. Priest and C.M. Taylor, Automobile engine tribology - approaching surface, Wear, 241 (2000) 193-203.
3. T. Tomikawa, H. Shiro, K. Hashizume and S. Kamiya, The new conceptual copper Alloy bearings without lead for diesel engines to achieve longer life under high load, SAE TECHNICAL PAPER SERIES, 981036 (1998).
4. S. Kamiya, T. Tomikawa, K. Hashizume and Y. Kumada, A Cu-Sn-Ag alloy bearing for heavy duty diesel engines -Its higher load-capacity and causes thereof-, Proceedings of the International Tribology Conference Nagasaki 2000.
5. M. Kano and Y. Kimura, Quantitative analysis of cam follower wear in relation to various material properties, Wear, 162-164 (1993) 897-905.
6. H. Kita, H. Kawamura, Y. Unno and S. Sekiyama, SAE Paper 950981 (1995).
7. H. Machida, H. Itoh, T. Imanishi and H. Tanaka, Design priciple of high power traction drive CVT, SAE TECHINICAL PAPER SERIES, 950675, (1995).
8. H. Machida and T. Abe, 204 fatigue life analysis of a traction drive CVT, Society of Automotive Engineers of Japan, Inc. 9636402, (1996).
9. T. Ichihashi, J. Deshimaru, Y. Yamaguchi, Performance of lubricants for new generation V-Belt CVT, Int. Congress on Continuously Variable Power Transmission CVT'99 (1999).
10. Dowson et al.(Editors), Mixed lubrication and lubricated wear, Proc. 11th Leeds-Lyon Symposium on Tribology, September, (1984) Butterworths Press.
11. K. Kato, Wear mechanisms, New direction in tribology, ed. by I. Hutchings, MEP Press, (1997) 39-56.
12. T. Kayaba and K. Kato, The adhesive transfer of the slip-tongue and the wedge, ASLE Trans., 24, 2 (1981) 164-174.
13. K. Hokkirigawa and K. Kato, An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear, Tribology International, 21, 1 (1988) 51-57.
14. T. Akagaki and K. Kato, Plastic flow process of surface layer in flow wear under boundary lubricated conditions, Wear, 117 (1987) 179-186.
15. A. Kapoor, K. L. Johnson and J. A. Williams, A model for the mild ratchetting wear of metals, Wear, 200 (1996) 38-44.
16. T. Yokobori, An interdisciplinary approach to fracture and strength of solids, Edited by J.D.C. Crisp, (1968), Wolters-Noordhoff Scientific Publications LTD., Groningen, 191-192.
17. K. H. Zum Gahr, Microstructure and wear of materials, Tribology series Elsevier, (1987), 132-148.
18. K. Hokkirigawa and K. Kato, Theoretical estimation of abrasive wear resistance based on microscopic wear mechanism, Proc. Wear of Materials, ASME, (1989) 1-8.
19. J.M. Challen and P. L. B. Oxley, An explanation of the different regimes of friction and wear using asperity deformation models, Wear, 53 (1979) 229-243.
20. G. Lundberg and A. Palmgren, dynamic capacity of rolling bearings, Ingeniorsveten - skapsakademiens Nr. 96 (1947).
21. G. Lundberg and A. Palmgren, dynamic capacity of roller bearings, Ingenicorsrenten - skapsakademiens, Nr. 210 (1952).
22. Fischer, T. E. and Tomizawa, H.: Interaction of tribochemistry and microfracture in the friction and wear of silicon nitride. Wear, 105 (1985) 29-45
23. S. Kim, K. Kato and K. Hokkirigawa, Seizure and wear in alumina ceramics, Lubrication, 5,31 (1986) 329-335 (in Japanese).
24. J.S. McFarlane and D.Tabor, Adhesion of solids and the effect of surface films, (1950).
25. A.W.J. de Geer, A. Begelinger and G. Salmon, Failure mechanisms in sliding lubricated concentrated contacts, Proceedings of the 11th Leeds-Lyon Symposium on Tribology, 105-116.
26. D.J. Schipper and A.W.J. de Gee, Lubrication Modes and the IRG transition diagram, Lubrication Science 8-1 (1995) 27-35.
27. T. Akagaki and K. Kato, Effects of additives on wear mode and morphology of wear debris generated in the lubricated sliding of steel, Wear, 141 (1991) 119-135.
28. T. Akagaki and K. Kato, Effects of hardness on the wear mode diagram in lubricated sliding friction of carbon steels, Wear, 141 (1990) 1-15.
29. J.M. Georges, Colloidal behavior of films in boundary lubrication, Elsevier Tribology Series, 7 (1982) 729-761.
30. K. Kato, Nanoscale analysis of wear mechanisms, in the Book "Nanotribology: a critical assessment and future directions", Edited by S.M. Hsu, 2001, Kluwer Academic Press, New York.
31. J.S. Sheasby, T.A. Caughlin, S. Terranova and A. Cohen, An examination of additive debris to give insight into boundary lubrication, in the Book "The third body concept", Edited by D. Dowson et al., 1996, Elsevier B.V, 685-693.
32. D. F. Diao, K. Kato and K. Hayashi, The local yield map of hard coating under sliding contact,as Thin Films in Tribology, D. Dowson et al. Editors, Elsevier Science Publishers B. V., (1993) 419-427.
33. S.Soren Andersson and Edwin Salas-Russo, The influence of surface roughness and oil viscosity on the transition in mixed lubricated sliding steel contacts, Wear, 174 (1994) 71-79.
34. Senad Dizdar and S.Soren Andersson, Influence of pre-formed boundary layers on wear transition in sliding lubricated contacts, Wear, 213 (1997) 117-122.
35. P. Ehret, D. Dowson and C.M. Taylor, Waviness orientation in EHL point contact, The third body concept, D. Dowson et al. (Editiors), Elsevier Science B.V., (1996) 235-244.
36. M. Smeeth and H.A. Spikes, The influence of slider/roll ratio on the film thickness of and EHD contact operating within the mixed lubrication regime, The third body concept, D. Dowson et al. (Editors), Elsevier Science B.V. (1996) 695-703.
37. T.Akagaki and K.Kato, Plastic flow process of surface layers in flow wear under boundary lubricated conditions, Wear, 117 (1987) 179-196.
38. Akagaki and K.Kato, Simulation of flow wear in boundary lubrication using a Vickers indentation Method, Tribology Transactions, 31,3 (1987) 311-316.
39. J.L. Sullivan and M. Meddleton, The effect of water based fire resistant lubricants on the pitting of steel, Proceedings of the 11th Leeds-Lyon Symposium on Tribology, 164-169.
40. th Int. Conf. Wear of Materials, April, 2001, Vancouver.
41. H. Tomizawa and T.E. Fischer, Interaction of tribochemistry and microfracture in the friction and wear of silicon nitride, Wear, 105 (1987) 29-45.
42. T.E. Fischer and H. Tomizawa, Friction and wear of silicon nitride and silicon carbide in water: hydrodynamic lubrication at low sliding speed obtained by tribochemical wear, ASLE Transaction, 30 (1985) 1, 41-46.
43. J. Xu., K. Kato and F. Honda, The transaction of wear mode during the running-in process of silicon nitride sliding in water, Wear, 205 (1997) 55-63.
44. Y.C. Chion and K. Kato, Wear mode of micro-cutting in dry sliding friction between steel pairs (Part 1), J.JSLE, 32 (1987) 41-48.