Plastic collapse analysis of slender circular tubes subjected to large deformation pure bending

Advances in Structural Engineering

Volumn 5, Issue 4, 2002, Pages 241-257

  Elchalakani, Mohamed ^a   Grzebieta, Raphael ^a   Zhao, Xiao Ling ^a  

^a MONASH UNIVERSITY   (Australia)

Author keywords

Circular tube; Energy; Mechanism; Plastic bending

Indexed keywords

BENDING (DEFORMATION); BUCKLING; COMPRESSION TESTING; COMPRESSIVE STRENGTH; ELASTICITY; ENERGY DISSIPATION; HINGES; PLASTICITY TESTING; STRUCTURAL ANALYSIS; STRUCTURAL LOADS; THIN WALLED STRUCTURES;

BUCKLING ANALYSIS; CIRCULAR HOLLOW SECTION; PLASTIC BENDING; PLASTIC COLLAPSE; PLASTIC COLLAPSE ANALYSIS;

TUBULAR STEEL STRUCTURES;

EID: 0036870039     PISSN: 13694332     EISSN: None     Source Type: Journal    
DOI: 10.1260/136943302320974617     Document Type: Article

References (50)

1. Andrews, K. R. F., England, G. L. and Ghani, E. (1983) "Classification of the axial collapse of cylindrical tubes under quasi-static loading", International Journal of Mechanical Sciences, Vol. 25, No. 9-10, pp. 687-696.
2. Abramowicz, W. and Jones, N. (1984) "Dynamic axial crushing of circular tubes", International Journal of Impact Engineering, Vol. 2, No. 3, pp. 263-281.
3. Bakker, M. C. M. (1992) Web Crippling of Cold-Formed Steel Members, PhD Thesis, Eindhoven University of Technology, The Netherlands.
4. Brown, J. C. and Tidbury, G. H. (1983) "An investigation of the collapse of thin-walled rectangular beams under biaxial bending", International Journal of Mechanical Sciences, Vol. 25, No. 9-10, pp. 733-746.
5. Cimpoeru, S. J. (1992) The Modelling of Collapse during Roll-Over of Bus frames Consisting of Square Thin-Walled Tubes, PhD Thesis, Monash University, Australia.
6. Calladine, C. R. (1983) "Plastic buckling of tubes in pure bending", Proceedings of the Symposium on Collapse, the buckling of structures in Theory and Practice, Thompson, J. M. T. and Hunt, G. W., ed., Cambridge University Press, Cambridge, pp. 111-124.
7. Elchalakani, M., Zhao, X. L. and Grzebieta, R. H. (2002) "Plastic slenderness limit for cold-formed circular steel hollow sections", Australian Journal of Structural Engineering, Vol. 3, No. 3, pp. 127-139.
8. Elchalakani, M., Zhao, X. L. and Grzebieta, R. H. (2002a) "Plastic mechanism analysis of circular tubes under pure bending", International Journal of Mechanical Sciences, Vol. 44, No. 6, pp. 1117-1143.
9. Elchalakani, M., Zhao, X. L. and Grzebieta, R. H. (2002b) "Bending tests to determine slenderness limits for cold-formed circular hollow sections", Journal of Constructional Steel Research, Vol. 58, No. 11, pp. 1407-1430.
10. Elchalakani, M., Zhao, X. L. and Grzebieta, R. H. (2001) "A closed-form solution for elastic buckling of thin-walled unstiffened circular cylinders under pure flexure", Proceedings of the 1st International Conference on Steel and Composite Structures, Pusan, Korea, pp. 267-274.
11. Flugge, W. (1960) Stresses in Shells, Springer-Verlag, New York pp. 499.
12. Grzebieta, R. H. (1990a) On the Equilibrium Approach for Predicting the Crush Response of Thin-Walled Mild Steel Structures, PhD Thesis, Monash University, Melbourne, Australia.
13. Grzebieta, R. H. (1990b) "An alternative method for determining the behaviour of round stocky tubes subjected to an axial crush load", Journal of Thin-Walled Structures, Vol. 9, pp. 61-89.
14. Grzebieta, R. H. (1995) "On the half-diamond plastic collapse mechanism", Proceedings of the 14th Australasian Conference on the Mechanics of Structures and Materials, Hobart, Australia, pp. 704-709.
15. Grzebieta, R. H. (1996) "Research into failure mechanism of some thin-walled round tubes", Proceedings of the Symposium on Plasticity and Impact Mechanics, Gupta N. K., ed., Implast 96, New Age International Ltd, New Deli, India.
16. Guillow, S. R., Lu, G and R. Grzebieta (2001) "Axial crushing of circular tubes", International Journal of Mechanical Sciences, Vol. 43, pp. 2103-2123.
17. Johnson, W., Soden, P. D. and Al-Hassani, S. T. S. (1977) "Inextensional collapse of thin-walled tubes under axial compression", Journal of Strain Analysis, Vol. 12, No. 4, pp. 317-330.
18. Karyadi, E. (1991) The Effect of Length Variation on Stability of Circular Cylindrical Shells, Delft University Research Report No. LR-669, Faculty of Aerospace Engineering.
19. Kecman, D. (1983) "Bending collapse of rectangular and square section tubes", International Journal of Mechanical Sciences, Vol. 25, No. 9-10, pp. 623-636.
20. Kim, H. S. and Wierzbicki, T. (2000) "Numerical and analytical study on deep biaxial bending collapse of thin-walled beams", International Journal of Mechanical Sciences, Vol. 42, pp. 1947-1970.
21. Krishnakumar, S. (1988), Buckling of Axially Compressed Cylindrical Shells with Local Imperfections, PhD Thesis, University of Tasmania, Department of Mechanical Engineering, Australia.
22. Kyriakides, S. and Shaw, P. K. (1982) "Response and stability of elastic-plastic circular pipes under combined bending and external pressure", International Journal of Solids and Structures, Vol. 18, pp 957-973.
23. Kyriakides, S. and Shaw, P. K. (1987) "Inelastic buckling of tubes under cyclic bending", Journal of Pressure Vessel Technology, Vol. 109, pp. 169-178.
24. Mamalis, A.G., Manolakas, D.E., Baldoukas, A.K. and Viegelahn, G. L. (1989) "Deformation characteristics of crashworthy thin walled steel tubes subjected to bending", Journal of Mechanical Sciences, Proceedings of Institute of Mechanical Engineers, Vol. 203, pp. 411-417.
25. Mamalis, A.G., Manolakas, D.E., Viegelahn, G.L., Vaxevanidis, N.M. and Johnson, W. (1986) "On the inextensional collapse of thin pvc conical shells", International Journal of Mechanical Sciences, Vol. 28, No. 5, pp. 323-335.
26. Murray, N. W. (1986) Introduction to the Theory of Thin-Walled Structures, Oxford, Clarendon Press.
27. Murray, N. W. and Bilston, P. (1992) "Local buckling of thin-walled pipes being bent in the plastic range", Thin-Walled structures, Vol. 14, pp. 411-434.
28. Murray, N. W. and Khoo, P.S. (1981) "Some basic plastic mechanisms in thin-walled structures", International Journal of Mechanical Sciences, Vol. 23, No. 12, pp. 703-713.
29. Ohkubo, Y., Akamatus, T. and Shirasawa, K. (1974) "Mean crushing strength of closed-hat section members", Society of Automotive Engineers, Paper 740040, pp. 1-12.
30. Otsuka, H. and Koga, T. (1997a) "Buckling of circular cylindrical shell under beam-like bending, 1st report, experiment", Transactions of Japan Society for Aerospace Science, Vol. 41, No. 133, pp. 38-45.
31. Otsuka, H. and Koga, T. (1997b) "Buckling of circular cylindrical shell under beam-like bending, 2nd report, buckling stress of cylindrical shells", Transactions of Japan Society for Aerospace Science, Vol. 41, No. 133, pp. 144-151.
32. Reid, S. R. and Goudie, K. (1989) "Denting and bending of tubular beams under local loads" in Structural Failure, Wierzbicki, T. and Jones, N., eds., John Wiley and Sons.
33. Rhodes, J. (2000) "Buckling of thin plates and thin-plate members-some points of interest", The 7th International Symposium on Structural Failure and Plasticity, Melbourne, Zhao, X.L. and Grzebieta, R.H., eds., pp. 443-449.
34. Shaw, P. K. and Kyriakides, S. (1985) "Inelastic analysis of thin-walled tubes under cyclic bending", Journal of Solids and Structures, Vol. 21, No. 11, pp. 1073-1100
35. Seide, P. and Weingarten, W.I. (1961) "On the buckling of circular cylindrical shells under pure bending", ASME, Journal of Applied Mechanics Division, Vol. 28, No. 1, pp. 112-116.
36. Singace, A. A. (1999) "Axial crushing analysis of tubes deforming in the multi-lobe mode", International Journal of Mechanical Sciences, Vol. 41, pp. 865-890.
37. Singace, A.A., Elsobky, H. and Reddy, T.Y. (1995) "On the eccentricity factor in the progressive crushing of tubes", International Journal of Mechanical Sciences, Vol. 32, No. 24, pp. 3589-3602.
38. Stephens, W.B., Starnes, J.H. and Almorth, B.O. (1975) "Collapse of long cylindrical shells under combined bending and pressure loads", AIAA Journal, Vol. 13, No. 1, pp. 20-25.
39. Stranghoner, N., Sedlacek, G. and Boeraeve, P. (1994) "Rotation requirement and rotation capacity of rectangular, square and circular hollow section beams", Proceedings of the 6th International Symposium on Tubular Structures, Melbourne, Grundy P., Holgate, A. and Wong, B (eds.) pp. 143-150.
40. Tanavde, A.S. (1985) Elastic-Plastic Local Buckling of Fabricated Steel Tubes in Flexural, D.Eng. Thesis, University of Wisconsin-Milwaukee.
41. Teng, J.G. (1996) "Buckling of thin shells: Recent Advances and trends", American Society of Mechanical Engineers, Applied Mechanics Reviews, Vol. 49, No. 4, pp. 263-274.
42. Timoshenko, S. and Gere, J. (1961) Theory of Elastic Stability, 2nd Edn, McGraw-Hill, New York.
43. White, G.J. (1999) The Collapse Modelling of Thin-Walled Square Sections Subjected to Combined Bending and Torsion, PhD Thesis, Monash University, Australia.
44. Wierzbicki, T. and W. Abramowicz (1983) "On the crushing mechanics of thin-walled structures", Journal of Applied Mechanics, Vol. 50, pp. 727-734.
45. Wierzbicki, T. and Suh, M.S. (1988) "Indentation of tubes under combined loading", International Journal of Mechanical Sciences, Vol. 30, No. 3/4, pp. 229-248.
46. Wierzbicki, T. and Sinmao, M. V. (1997) "A simplified model for Brazier effect in plastic bending of cylindrical tubes", International Journal of Pressure Vessels and Piping, Vol. 71, pp. 19-28.
47. Yu, T.X., Reid, S. R. and B. Wang (1993) "Hardening-softening behaviour of tubular cantilever beams", International Journal of Mechanical Sciences, Vol. 35, pp. 1021-1033.
48. Zeinoddini, H., Harding, J.E. and Parke, G.A.R. (2000) "Contribution of ring resistance in the behaviour of steel tubes subjected to a lateral impact loads", International Journal of Mechanical Sciences, Vol. 42, pp. 2303-2320.
49. Zhao, X. L. and Hancock, G. J. (1993a) "A theoretical analysis of the plastic-moment capacity of an inclined yield line under axial force", Thin-Walled Structures, Vol. 15, pp. 185-207.
50. Zhao, X. L. and Hancock, G. J. (1993b) "Experimental verification of the theory of plastic-moment capacity of an inclined yield line under axial force", Thin-Walled Structures, Vol. 15, pp. 209-233.