Factors affecting the shear forces in high-consistency refining

Journal of Pulp and Paper Science

Volumn 28, Issue 11, 2002, Pages 364-368

  Senger, J J ^a   Ouellet, D ^b  

^a UNIVERSITY OF BRITISH COLUMBIA   (Canada)

^b PAPRICAN   (Canada)

Author keywords

Energy consumption; Flocs; Force; Friction factor; High consistency; Mechanical pulping; Refiners; Refining; Sharpness; Shear stress; Variables; Wear

Indexed keywords

ENERGY UTILIZATION; FRICTION; SHEAR STRESS; THICKNESS MEASUREMENT;

HIGH-CONSISTENCY REFINING; SINGLE-BAR REFINER;

PULP REFINING;

CONSISTENCY; ENERGY CONSUMPTION; FRICTION FACTOR; QUALITY; SHEAR STRESS; THICKNESS;

EID: 0036869870     PISSN: 08266220     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (35)

1. GIERTZ, H.W., "A New Way to Look at the Beating Process". Norsk Skog. 18(7):239-248 (1964).
2. PAGE, D.H., "The Beating of Chemical Pulps-The Action and the Effects", Fundamentals of Papermaking: Trans. Fundamental Res. Symp., Cambridge, UK, 1-38 (1989).
3. GONCHAROV, V. N., "Force Factors in a Disk Refiner and their Effect on the Beating Process", Bum. Promst. 12(5):12-14 (1971).
4. NORDMAN, L., LEVLIN, J.E., MAKKONEN, T. and JOKISALO, H., "Conditions in an LC-Refiner as Observed by Physical Measurements", Paperi ja Puu 63(4):169-180 (1981).
5. CAUCAL, G., CHAUSSY, D. and RENAUD, M., "Etude physique et hydraulique du raffinage.", Revue ATIP 45(5):187-199 (1991).
6. ATACK, D., "Towards a Theory of Refiner Mechanical Pulping", Appita J. 34(3):223-227 (1980).
7. MARTINEZ, D.M. and KEREKES, R.J., "Forces on Fibres in Low-Consistency Refining", Tappi J. 77(12):119-123 (1994).
8. MARTINEZ, D.M., "The Energy Expended on Pulp Fibres during Low Consistency Refining", Ph.D. Thesis, Dept. Chem. Engin., Univ. British Columbia, Vancouver, BC, Canada (1995).
9. MARTINEZ, D.M., BATCHELOR, W.J., KEREKES, R.J. and OUELLET, D., "Forces on Fibres in Low-Consistency Refining: Normal Force", J. Pulp Paper Sci. 23(1):J11-18 (1997).
10. BATCHELOR, W.J., MARTINEZ, D.M., KEREKES, R.J. and OUELLET, D., "Forces on Fibres in Low-Consistency Refining: Shear Force", J. Pulp Paper Sci. 23(1):J40-45 (1997).
11. BATCHELOR, W.J. and OUELLET, D., "Estimating Forces on Fibres in Refining", Pira 4th Intl. Refining Conf., Fiuggi, Italy, Paper 2 (1997).
12. SENGER, J.J., "The Forces on Pulp Fibres During Refining", M.A.Sc. Thesis, Dept. Mech. Engin., Univ. British Columbia, Vancouver, BC, Canada (1998).
13. SENGER, J.J. and OUELLET, D., "Factors Affecting the Shear Forces in High-Consistency Refining.", Proc. Intl. Mechanical Pulping Conf., Helsinki, Finland, 531-545 (2001).
14. LAW, K.-N., "The Role of Fibrillar Elements in Thermomechanical Pulp", Pulp Paper Can. 101(1):57-60 (2000).
15. FRANZEN, R. and SWEITZER, R., "Refining Forces in High Stock Concentration Pulping", Appita J. 36(2):116-121 (1982).
16. MILES, K.B. and MAY, W.D., "The Flow of Pulp in Chip Refiners", J. Pulp Paper Sci. 16(2):J63-71 (1990).
17. MILES, K.B. and KARNIS, A., "The Refining Characteristics of Chemimechanical Pulps", Tappi J. 76(9):181-188 (1993).
18. ENGSTRAND, P., KARLSTRÖM, A. and NILSSON, L., "The Impact of Chemical Addition on Refining Parameters", Preprints Intl. Mech. Pulp. Conf., PAPTAC, 281-286 (1995).
19. ISAKSSON, A.J., HORCH, A., ALLISON, B.J., KARLSTRÖM, A. and NILSSON, L., "Modelling of Mechanical Thrust in TMP Refiners", Proc. Intl. Mech. Pulp. Conf., Stockholm, Sweden, 87-93 (1997).
20. SENGER, J.J., OUELLET, D. and BENNINGTON, C.P.J., "Effects of Pulp Furnish and Refiner Speed on Residence Time in a High-Consistency Refiner". Tappi J. 81(4):152-158 (1998).
21. CHRISTENSEN, P.K. and GIERTZ, H.W. "The Cellulose/Water Relationship", Consolidation of the Paper Web: Trans. Fundamental Res. Symp., Cambridge, UK, 59-84 (1965).
22. BACK, E.L. and ANDERSSON, L.L., "The Effect of Temperature on Wet Web Strength Properties", Tappi J. 76(5):164-172 (1993).
23. JACQUELIN, G., "Study of the Properties of Fibrous Networks in Suspension. Tendency of Fibres to Agglomerate. Applications", Techniques Recherches Papetières 7:22-36 (1966).
24. KATZ, S., LIEBERGOTT, N. and SCALLAN, A.M., "A Mechanism for the Alkali Strengthening of Mechanical Pulps", Tappi 64(7):97-100 (1981).
25. KATZ, S. and SCALLAN, A.M., "Ozone and Caustic Soda Treatments of Mechanical Pulp". Tappi J. 66(1):85-87 (1983).
26. SCALLAN, A.M., "The Effect of Acidic Groups on the Swelling of Pulps: A Review", Tappi J. 66(11):73-75 (1983).
27. BECKER, H. and NOACK, D., "Studies on the Dynamic Torsional Viscoelasticity of Wood", Wood Sci. Tech. 2:213-230 (1968).
28. KORAN, Z., "Energy Consumption in Mechanical Fibre Separation as a Function of Temperature", Trans. Tech. Sect. Can. Pulp Paper Assoc. 7(2):TR40-44 (1981).
29. BJÖRKQVIST, T., LAUTALA, P., SAHARINEN, E., PAULAPURO, H., KOSKENHELY, K. and LÖNNBERG, B., "Behaviour of Spruce Sapwood in Mechanical Loading", J. Pulp Paper Sci. 25(4):118-123 (1999).
30. JANTUNEN, J., "Visco-Elastic Properties of Wet Webs Under Dynamic Conditions", Papermaking Raw Materials: Trans. 8th Fundamental Res. Symp., Oxford, UK, 133-162 (1985).
31. ATACK, D. and STATIONWALA, M.I., "On the Measurement of Temperature and Pressure in the Refining Zone of an Open Discharge Refiner", Trans. Tech. Sect. Can. Pulp Paper Assoc. (3):71-76 (1975).
32. HARTMAN, R.R., "Mechanical Treatment of Pulp Fibres for Property Development", Ph.D. Thesis, Lawrence Univ., Appleton, WI, USA (1984).
33. BIASCA, J.E., "Oriented Fiber Refining: Application of Individual Modes of Mechanical Action to Single Pulp Fibers", Ph.D. Thesis, Inst. Paper Chem., Appleton, WI, USA (1989).
34. ALAMI, R., BOILEAU, I., HARRIS, G., LACHAUME, J., KARNIS, A., MILES, K.B. and ROCHE, A., "Impact of Refining Intensity on Energy Reduction in Commercial Size Refiners: Effect of Primary Stage Consistency", Tappi J. 80(1):185-193 (1997).
35. MURTON, K.D., "Effect of Primary Stage Refining Consistency on TMP Pulp Quality and Energy Consumption", Proc. 51st Appita Ann. Gen. Mtg., Melbourne, Australia, 87-94 (1997).