Noise path synthesis with nonlinear joints

Nonlinear Dynamics

Volumn 30, Issue 3, 2002, Pages 295-312

  Rook, Todd ^a  

^a The Ohio State University   (United States)

Author keywords

Harmonic balance; Parametric continuation; Power flow; Receptance matrix

Indexed keywords

DEGREES OF FREEDOM (MECHANICS); DISCRETE FOURIER TRANSFORMS; EIGENVALUES AND EIGENFUNCTIONS; FREQUENCY RESPONSE; LOADS (FORCES); MACHINE COMPONENTS; MATRIX ALGEBRA;

HARMONIC BALANCE; NOISE PATH SYNTHESIS; NONLINEAR JOINTS; PARAMETRIC CONTINUATION; POWER FLOW; RECEPTANCE MATRIX;

VIBRATIONS (MECHANICAL);

EID: 0036847045     PISSN: 0924090X     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1020579208868     Document Type: Article

References (39)

1. Gibbs, B. M., Petersson, B. A. T., and Shuye, Q., 'The characterisation of structure-borne emission of building services machinery using the source descriptor concept', Noise Control Engineering Journal 37(2), 1991, 53-61.
2. Huang, Y. and Gibbs, B. M., 'The measurement of structure-borne sound transmission at plate junctions by intensity method', Applied Acoustics 35, 1991, 47-61.
3. Moorhouse, A. T. and Gibbs, B. M., 'Prediction of the structure-borne sound emission of machines: Development of a methodology', Journal of Sound and Vibration 167(2), 1993, 223-237.
4. Petersson, B. A. T. and Gibbs, B. M., 'Use of the source descriptor concept in studies of multi-point and multi-directional vibrational sources', Journal of Sound and Vibration 168(1), 1993, 157-176.
5. Moorhouse, A. T. and Gibbs, B. M., 'Measurement of structure-borne sound emission from resiliently mounted machines in-situ', Journal of Sound and Vibration 180(1), 1995, 143-161.
6. Rook, T. E. and Singh, R., 'Structural intensity calculations for compliant plate-beam structures connected by bearings', Journal of Sound and Vibration 211(3), 1998, 365-387.
7. Rook, T. E. and Singh, R., 'Mobility analysis of structure-borne noise power flow through bearings in gearbox-like structures', Noise Control Engineering Journal 44(2), 1996, 69-78.
8. Comparin, R. J. and Singh, R., 'Frequency response characteristics of a multiple-degree-of-freedom system with clearances', Journal of Sound and Vibration 142, 1990, 101-124.
9. Rook, T. E. and Singh, R., 'Dynamic analysis of a reverse-idler gear pair with concurrent clearances', Journal of Sound and Vibration 182(2), 1995, 303-322.
10. Bowden, M. and Dugundji, J., 'Joint damping and nonlinearity in dynamics of space structures', AIAA Journal 28(4), 1990, 740-749.
11. Wallaschek, J., 'Dynamics of non-linear automobile shock-absorbers', International Journal of Non-Linear Mechanics 25 (2/3), 1990, 299-308.
12. Qu, J. L. and Qian, B. L., 'On the vibrational power flow from engine to elastic structure through single and double resilient mounting system', SAE Paper 911057, 1991, pp. 149-153.
13. Williams, J. S., Steyer, G. C., Strand, M., and Ditman, J., 'The dynamics of powertrain mounts and brackets and their contribution to high frequency powertrain noise', in Proceedings of the 14th International Modal Analysis Conference (IMAC), A. L. Wicks (ed.), Union College, 1996, pp. 1117-1123.
14. Brennan, M. J., Pinnington, R. J., and Elliot, S. J., 'Mechanisms of noise transmission through helicopter gearbox support struts', ASME Journal of Vibration and Acoustics 116(4), 1994, 548-554.
15. Ren, Y. and Beards, C. F., 'A new receptance-based perturbative multi-harmonic balance method for the calculation of the steady state response of non-linear systems', Journal of Sound and Vibration 172(5), 1994, 593-604.
16. Bohlen, S. and Gaul, L., 'Vibrations of structures coupled by nonlinear transfer behavior of joints: A combined computational and experimental approach', in Proceedings of the 5th International Modal Analysis Conference (IMAC), D. J. De Michele (ed.), Union College, 1987, pp. 86-91.
17. Cipra, R. J. and Uicker, J. J., Jr., 'On the dynamic simulation of large nonlinear mechanical systems. Part 1: An overview of the simulation technique. Substructuring and frequency do considerations', ASME Journal of Mechanical Design 103, 1981, 849-856.
18. Royston, T. J. and Singh, R., 'Experimental study of a mechanical system containing a local continuous stiffness non-linearity under periodic excitation and a static load', Journal of Sound and Vibration 198(3), 1996, 279-298.
19. Royston, T. J. and Singh, R., 'Optimization of passive and active non-linear vibration mounting systems based on vibratory power transmission', Journal of Sound and Vibration 194(3), 1996, 295-316.
20. Royston, T. J. and Singh, R., 'Periodic response of mechanical systems with local non-linearities using an enhanced Galerkin technique', Journal of Sound and Vibration 194(2), 1996, 243-263.
21. Choi, Y. S. and Noah, S. T., 'Forced periodic vibration of unsymmetric piecewise linear systems', Journal of Sound and Vibration 121, 1988, 117-126.
22. Padmanabhan, C. and Singh, R., 'Analysis of periodically excited non-linear systems by a parametric continuation technique', Journal of Sound and Vibration 184, 1995, 35-58.
23. Sundararajan, P. and Noah, S. T., 'Dynamics of forced nonlinear systems using shooting/arclength continuation method - Application to rotor systems', ASME Journal of Vibration and Acoustics 119(1), 1997, 9-20.
24. Blair, K. B., Krousgrill, C. M., and Farris, T. N., 'Harmonic balance and continuation techniques in the dynamic analysis of Duffing's equation', Journal of Sound and Vibration 202(5), 1997, 717-731.
25. Kahraman, A. and Singh, R., 'Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system', Journal of Sound and Vibration 146, 1991, 135-156.
26. Saigo, M., Okada, Y., and Ono, K., 'Self-excited vibration caused by internal friction in universal joints and its stabilizing method', ASME Journal of Vibration and Acoustics 119(2), 1997, 221-229.
27. Huizinga, A. T. M. J. M., van Campen, D. H., and de Kraker, A., 'Application of hybrid frequency domain substructing for modelling an automotive suspension system', ASME Journal of Vibration and Acoustics 119(3), 1997, 304-310.
28. Shankar, K. and Keane, A. J., 'Variational energy flow analysis using a substructure approach: The application of receptance theory to FEA and SEA', Journal of Sound and Vibration 201(4), 1997, 491-513.
29. Kundert, K. S., Sorkin, G. B., and Sangiovanni-Vincentelli, A., 'Applying harmonic balance to almost-periodic circuits', IEEE Transactions on Microwave Theory and Techniques 36(2), 1988, 366-378.
30. Rook, T. E, and Singh, R., 'Modal truncation issues in synthesis procedures for vibratory power flow and dissipation', Journal of the Acoustical Society of America 99, 1996, 2158-2166.
31. Chua, L. O. and Ushida, A., 'Algorithms for computing almost periodic steady-state response of nonlinear systems to multiple input frequencies', IEEE Transactions on Circuits and Systems 28(10), 1981, 953-971.
32. Tanaka, N., Snyder, S. D., Kikushima, Y., and Kuroda, M., 'Vortex structural power flow in a thin plate and the influence on the acoustical field', Journal of the Acoustical Society of America 96(3), 1994, 1563-1574.
33. Gavric, L. and Pavic, G., 'A finite element method for computation of structural intensity by the normal mode approach', Journal of Sound and Vibration 164(1), 1993, 29-43.
34. Spalding, A. B. and Mann, J. A., III, 'Placing small constrained layer damping patches on a plate to attain global or local velocity changes', Journal of the Acoustical Society of America 97, 1995, 3617-3624.
35. Berry, A., Guyader, J.-L., and Nicholas, J., 'A general formulation for the radiation from rectangular baffled plates with arbitrary boundary conditions', Journal of the Acoustical Society of America 88(6), 1990, 2792-2802.
36. Rericha, I., 'Antriebswellen als Geräuschquelle bei frontgetriebenen Fahrzeugen', Automobil-Industrie 3, 1991, 217-223 [in German].
37. Oschsner, S. D. and Bernhard, R. J., 'Application of a component mobility modeling technique to automotive suspension systems', Noise Control Engineering Journal 43(3), 1995, 73-82.
38. Ariga, K., Abe, T., Yokoyama, Y., and Enomoto, Y., 'Reduction of transaxle gear noise by gear train modification', SAE Paper 922108, 1992.
39. Schwibinger, P., Hendrick, D., Wu, W., and Imanishi, Y., 'Noise and vibration control measures in the powertrain of passenger cars', SAE Paper 911053, 1991, pp. 123-131.