Effect of triaxial stress constraint on the deformation and fracture of polymers

Acta Mechanica Sinica/Lixue Xuebao

Volumn 18, Issue 5, 2002, Pages 480-493

  Wang, Tiejun ^a   Kikno, Kishimoto ^b   Mitsuo, Notomi ^c  

^a XI'AN JIAOTONG UNIVERSITY   (China)

^b TOKYO INSTITUTE OF TECHNOLOGY   (Japan)

^c MEIJI UNIVERSITY   (Japan)

Author keywords

ABS; Cavitation; Craze; Deformation; Fracture; Micromechanics; PC; Polymer alloy; Toughening

Indexed keywords

CAVITATION; COMPOSITE MICROMECHANICS; CRAZING; DEFORMATION; FRACTURE; NUMERICAL ANALYSIS; POLYCARBONATES; SCANNING ELECTRON MICROSCOPY; STRESSES; TOUGHENING;

CRAZE; MICROMECHANICS; POLYMER ALLOY; TRIAXIAL STRESS CONSTRAINT EFFECT;

POLYMERS;

EID: 0036822221     PISSN: 05677718     EISSN: None     Source Type: Journal    
DOI: 10.1007/bf02486573     Document Type: Article

References (51)

1. Anderson TL. Fracture Mechanics - Fundamentals and Applications. Florida: CRC Press, Inc., 1995
2. Williams JG. Fracture Mechanics of Polymers. Chichester: Ellis Horwood Ltd., 1984
3. Cheng C, Hiltner A, Baer E, et al. Deformation of rubber-toughened polycarbonate: macroscale analysis of the damage zone. J Appl Polymer Sci, 1994, 52(2): 177-193
4. Cheng C, Hiltner A, Baer E, et al. Deformation of rubber-toughened polycarbonate: microscale and nanoscale analysis of the damage zone. J Appl Polymer Sci, 1995, 55(12): 1691-1702
5. Greco R, Sorrentino A. Polycarbonate/ABS blends: a literature review. Advances in Polymer Technology, 1994, 13(4): 249-258
6. Guild FJ, Kinloch AJ. Modelling the properties of rubber-modified epoxy polymers. J Mater Sci, 1995, 30(7): 1689-1697
7. Bernal CR, Frontini PM, Sforza M, et al. Microstructure, deformation, and fracture behavior of commercial ABS resins. J Appl Polymer Sci, 1995, 58(1): 1-10
8. Wang TJ, Kishimoto K, Notomi M. A micromechanics criterion for the ductile fracture of a polycarbonate. Key Engineering Materials, 2000, 183(1): 121-126
9. Notomi M, Kishimoto K, Wang T J, et al. Tensile and fracture behaviors of PC/ABS polymer alloy. Key Engineering Materials, 2000, 183(1): 779-784
10. Husaini, Kishimoto K, Notomi M, et al. Fracture behaviour of PC/ABS resin under mixed-mode loading. Fatigue Fracture Engineering Materials Structures, 2001, 24(12): 895-903
11. Lombardo BS, Keshhula H, Paul DR. Influence of ABS type on morphology and mechanical properties of PC/ABS blends. J Appl Polymer Sci, 1994, 54(11); 1697-1720
12. Kayano Y, Keskkula H, Paul DR. Fracture behavior of polycarbonate blends with a core-shell impact modifier. Polymer, 1998, 39(4): 821-834
13. Schemer B, Kuriyama T, Narisawa I, et al. Simulation of the deformation behavior and the fracture process of rubber toughenes polycarbonate. J Mater Sci Letters, 1995, 14(9): 660-664
14. Pearson RA, Yee AF. Influence of particle size and particle size distribution on toughening mechanisms in rubber-modified epoxies. J Mater Sci, 1991, 26(14): 3828-3844
15. Yee AF, Pearson RA. Toughening mechanisms in elastomer-modified epoxies. J Mater Sci, 1986, 21(7): 2462-2488
16. Qian YJ, Pearson RA, Dimomie VL, et al. The role of dispersed phase morphology on toughening of epoxies. Polymer, 1997, 38(1): 21-30
17. Bucknall CB, Karpodinis A, Zhang XC. A model for particle cavitation in rubber-toughened plastics. J Mater Sci, 1994, 29(13): 3377-3383
18. Wu S. Phase structure and adhesion in polymer blends: a criterion for rubber toughening. Polymer, 1985, 26(12): 1855-1867
19. Wu S. A generalized criterion for rubber toughening: the critical matrix ligament thickness. J Appl Polymer Sci, 1988, 35(2): 549-561
20. Tse A, Shin E, Hiltner A, et al. Damage zone development in PVC under a multiaxial tensile stress state. J Mater Sci, 1991, 26(19): 5374-5382
21. Rice JR. Tracey DM. On the ductile enlargement of void in triaxial stress fields. J Mech Phys Solids, 1969, 17(2): 201-217
22. Hancock JW, Machenzie AC. On the mechanisms of ductile failure in high-strength steels subjected a multi-axial stress-states. J Mech Phys Solids, 1976, 24(2): 147-169
23. Lemaitre J. A continuum damage mechanics model for ductile fracture. J Eng Mater Technol, 1985, 107(1): 83-89
24. Wang TJ. Unified CDM model and local criterion for ductile fracture-I. Eng Fracture Mech, 1992, 42(1): 177-183
25. Wang TJ. Unified CDM model and local criterion for ductile fracture-II. Eng Fracture Mech, 1992, 42(1): 185-192
26. Wang TJ. Further investigation of a new continuum damage mechanics criterion for ductile fracture: experimental verification and application. Eng Fracture Mech, 1994, 48(2): 217-230
27. Wang TJ. A new ductile fracture theory and its applications. Acta Mechanica Sinica, 1995, 11(1): 83-93
28. Wang TJ, Kuang ZK. New post-yield fracture toughness parameters for engineering materials. ASME J Pre Ves Technol, 1995, 117(4): 395-398
29. Huang Y, Kinloch AJ. Modelling of the toughening mechanisms in rubber-modified epoxy polymers. J Mater Sci, 1992, 27(10): 2753-2769
30. Fukui T, Kikuchi Y, Inoue T. Elastic-plastic analysis of the toughening mechanism in rubber-modified nylon: matrix yielding and cavitation. Polymer, 1991, 32(13): 2367-2371
31. Chen XH, Mai YW. Micromechanics of rubber-toughened polymers. J Materials Science, 1998, 33(14): 3529-3539
32. Tzika PA, Boyce MC, Parks DM. Micromechanics of deformation in particle-toughened polyamides. J Mech Phys Solids, 2000, 48(9): 1893-1929
33. Socrate S, Boyce MC. Micromechanics of toughened polycarbonate. J Mech Phys Solids, 2000, 48(2): 233-273
34. Danielsson M, Parks DM, Boyce MC. Three-dimensional micromechanical modeling of voided polymeric materials. J Mech Phys Solids, 2002, 50(2): 351-379
35. Donald AM, Kramer EJ. The mechanism for craze-tip advance in glassy polymers. Philosophical Magazine A, 1981, 43(4): 857-870
36. Kamboour RP. A review of crazing and fracture in thermoplastics. J Polymer Science, 1973, 7(1): 1-154
37. Kramer EJ. Microscopic and molecular fundamentals of crazing. Adv Polymer Science, 1983, 52(1): 1-56
38. Kramer EJ, Berger LL. Craze growth and fracture. Adv Polymer Science, 1990, 91(1): 1-68
39. Estevez R, Tijssens MGA, Van der Giessen E. Modelling of the competition between shear yielding and crazing in glassy polymers. J Mech Phys Solids, 2000, 48(12): 2585-2617
40. Ishikawa M, Takahashi H. Crazing mechanism based on plastic instability. J Mater Science, 1991, 26(5): 1295-1300
41. Hui CY, Ruina A, Creton C, et al. Micromechanics of crack growth into a craze in a polymer glass. Macromolecules, 1992, 25(15): 3948-3955
42. Xiao ZM, Lim MK, Liew KM. Micromechanics analysis of crazing phenomenon in polymers. J Materials Processing Technology, 1995, 48(1-4): 437-443
43. Marissen R. Craze growth mechanics. Polymer, 2000, 41(3): 1119-1129
44. Tijssens MGA, Van der Giessen E, Sluys LJ. Modeling of crazing using a cohesive surface methodology. Mechanics of Materials, 2000, 32(1): 19-35
45. Lai J, Van der Giessen E. A numerical study of crack-tip plasticity in glassy polymers. Mechanics of Materials, 1997, 25(3): 183-197
46. Socrate S, Boyce MC, Lazzeri A. A micromechanical model for multiple crazing in high impact polystyrene. Mechanics of Materials, 2001, 33(3): 155-175
47. Narisawa I, Takemori MT. Fracture toughness of impact-modified polymers based on the J-integral. Polymer Eng Science, 1989, 29(10): 671-678
48. Levita G, Parisi L, Marchetti A. The work of fracture in semiductile polymers. J Mater Science, 1994, 29(17): 4545-4553
49. Mai YW, Powell P. Essential work of fracture and J-integral measurements for ductile polymers. J Polymer Science, Part B: Polymer Physics, 1991, 29(7): 785-793
50. Wu JS, Mai YW, Cotterell B. Fracture toughness and fracture mechanisms of PBT/PC/IM blend. J Mater Science, 1993, 28(12): 3373-3384
51. Wu JS, Mai YW. The essential fracture work concept for toughness measurement of ductile polymers. Polymer Engineering and Science, 1996, 36(18): 2275-2287