Effect of heat treatment on formability in 0.15C-1.5Si-1.5Mn multiphase cold-rolled steel sheet

Metals and Materials International

Volumn 8, Issue 5, 2002, Pages 435-441

  Lee, Chang Gil ^c   Kim, Sung Joon ^c   Song, Byung Hwan ^a   Lee, Sunghak ^b  

^a TaeguTec LTD   (South Korea)

^b Pohang University of Science and Technology (POSTECH)   (South Korea)

^c NONE

Author keywords

Formability; Multi phase cold rolled steel sheet; Retained austenite; Stability; TRIP

Indexed keywords

AUSTENITE; COLD ROLLED STEEL; COLD ROLLING; CONVERGENCE OF NUMERICAL METHODS; FORMABILITY; HEAT TREATMENT; HIGH STRENGTH STEEL; ISOTHERMS; MANGANESE ALLOYS; MANGANESE STEEL; METAL CLADDING; PLASTICITY; SILICON ALLOYS; STABILITY; STEEL SHEET; TENSILE STRAIN; TENSILE TESTING; TRANSFORMATION INDUCED PLASTICITY STEEL; VOLUME FRACTION;

EFFECT OF HEAT TREATMENTS; ISOTHERMAL HOLDING; MICRO-STRUCTURAL OBSERVATIONS; RETAINED AUSTENITE; RETAINED AUSTENITE STABILITIES; STRAIN INDUCED TRANSFORMATION; TRIP; X RAY DIFFRACTOMETERS;

SILICON STEEL;

EID: 0036821092     PISSN: 12259438     EISSN: None     Source Type: Journal    
DOI: 10.1007/bf03027239     Document Type: Article

References (29)

1. H. Hayashi, CAMP-ISIJ 11, 388 (1993).
2. K. Sugimoto, N. Usui, M. Kobayashi, and S. I. Hashimoto, ISIJ Int. 32, 1311 (1992).
3. K. Sugimoto, M. Kobayashi, and S. I. Hashimoto, Metall. Trans. A 23, 3085 (1992).
4. H. C. Chen, H. Era, and M. Shimizu, Metall. Trans. A 20, 437 (1989).
5. C. G. Lee and S. J. Kim, J. Kor. Inst. Met. & Mater. 36, 1024 (1998).
6. O. Matsumra, Y. Sakuma, Y. Ishii, and J. Zhao, ISIJ Int. 32, 1110 (1992).
7. S. Hiwatashi, M. Takahashi, T. Katayama, and M. Usuda, J. Jpn. Soc. Tech. Plasticity 35, 1109 (1994).
8. K. Sugimoto, M. Kobayashi, A. Nagasaka, and S. Hashimoto, ISIJ Int. 35, 1407 (1995).
9. N. C. Goel, S. Sangal, and K. Tangri, Metall. Trans. A 16, 2013 (1985).
10. J. H. Chung, Ph. D. Thesis, POSTECH (1993).
11. H. C. Shin, T. K. Ha, and Y. W. Chang, J. Kor. Inst. Met. & Mater. 34, 1550 (1996).
12. K. Imai, M. Komatsu, and W. Kokuju, CAMP-ISIJ 6, 754 (1993).
13. K. Sugimoto, M. Kobayashi, and S. Hashimoto, J. Jpn. Inst. Met. 54, 657 (1990).
14. S. G. Park, C. G. Lee, S. J. Kim, and I. D. Choi, J. Kor. Inst. Met. & Mater. 36, 1234 (1998).
15. C. G. Lee, S. J. Kim, S. G. Park, and I. D. Choi, J. Kor. Inst. Met. & Mater. 36, 1382 (1998).
16. K. W. Andrew, J. Iron Steel Inst. 203, 721 (1965).
17. R. L. Miller, Trans. ASM 61, 592 (1968).
18. Y. Sakuma, N. Kimura, A. Itami, S. Hiwatashi, O. Kawano, and K. Sakata, Nippon Steel Technical Report 64, 20 (1995).
19. J. M. Rigsbee and P. J. VanderArend, Formable HSLA and Dual-Phase Steels (ed., A. T. Davenport), p. 56, TMS-AIME, Warrendale, PA (1979).
20. O. Matsumura, Y. Sakuma, and H. Takechi, Scripta metall. 21, 1301 (1987).
21. R. A. Ayres, J. Appl. Met. Working 1, 73 (1979).
22. Y. S. Kim and K. C. Park, J. Kor. Soc. Mech. Eng. 33, 47 (1993).
23. R. Sowerby and J. L. Duncan, Int. J. Mech. Sci. 13, 217 (1971).
24. M. J. Painter and R. Pearce, J. Phys. D: Appl. Phys. 7, 992 (1974).
25. S. P. Keeler, Sagamore Army Materials Res. Conf., Raquette Lake, NY (1974).
26. S. P. Keeler, Proc. 21st Sagamore Conf.: Advances in Deformation Processing, Plenum Press, NY (1978).
27. R. L. Whiteley, Trans. ASM 52, 154 (1959).
28. S. P. Keeler and W. A. Backofen, Trans. ASM 56, 25 (1963).
29. S. K. Kim, H. C. Shin, J. H. Chung, and Y. W. Chang, J. Kor. Inst. Met. & Mater. 36, 151 (1998).