Properties of heat-humidity cured cellulose acetate phthalate free films

European Journal of Pharmaceutical Sciences

Volumn 17, Issue 1-2, 2002, Pages 31-41

  Liu, Jiping ^a   Williams III, Robert O ^a  

^a UNIVERSITY OF TEXAS AT AUSTIN   (United States)

Author keywords

Cellulose acetate phthalate; Curing; Humidity; Sprayed films

Indexed keywords

CELLULOSE FILMS; COALESCENCE; CURING; DEGRADATION; EVAPORATION; LEACHING; MOISTURE; PLASTICIZERS; STRENGTH OF MATERIALS; SURFACE ROUGHNESS; TENSILE STRENGTH;

SPRAY RATES;

DRUG PRODUCTS;

CELLACEFATE; CITRIC ACID TRIETHYL ESTER; ETHYL CELLULOSE; PHTHALIC ACID DIETHYL ESTER; PLASTICIZER; POLYMER;

ACIDITY; ARTICLE; CHEMICAL ANALYSIS; DEGRADATION; FILM; HEAT; HUMIDITY; METHODOLOGY; MOISTURE; PRIORITY JOURNAL; SURFACE PROPERTY; TEMPERATURE; TENSILE STRENGTH; YOUNG MODULUS;

CELLULOSE; CHEMISTRY, PHARMACEUTICAL; HEAT; HUMIDITY;

EID: 0036803224     PISSN: 09280987     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0928-0987(02)00131-8     Document Type: Article

References (33)

1. ® RS30D film-coated sustained-release theophylline pellets. Eur. J. Pharm. Biopharm. 42:(1):1996;29-35.
2. Aulton A.E. Assessment of the mechanical properties of film coating materials. Int. J. Pharm. Tech. Prod. Mfr. 3:(1):1982;9-16.
3. Aulton M.E., Abdul-Razzak M.H. The mechanical properties of hydroxypropyl methylcellulose films derived from aqueous system: I. The influence of plasticizers. Drug Dev. Ind. Pharm. 7:1981;649-668.
4. ASTM M. American Society for Testing and Materials Guideline, E96-95. Standard Test Method For Water Vapor Transmission of Materials. 1995;ASTM, West Conshohocken, PA.
5. ASTM. American Society for Testing and Materials Guideline, D882-95a. Standard Test Method For Tensile Properties of Thin Plastic Sheeting. 1995;ASTM.
6. Bodmeier R., Paeratakul O. Determination of plasticizers commonly used in pharmaceutical dosage forms by high performance liquid chromatography. J. Liq. Chromatogr. 14:(2):1991;365-375.
7. Bodmeier R., Paeratakul O. Dry and wet strengths of polymeric films prepared from an aqueous colloidal polymer dispersion, Eudragit RS30D. Int. J. Pharm. 96:1993;129-138.
8. Bodmeier R., Paeratakul O. The effect of curing on drug release and morphological properties of ethylcellulose pseudolatex-coated beads. Drug Dev. Ind. Pharm. 20:(9):1994;1517-1533.
9. Chang R.K. A comparison of rheological and enteric properties among organic solutions, ammonium salt aqueous solutions, and latex systems of some enteric polymers. Pharm. Tech. 14:(10):1990;62-70.
10. FMC Corporation. Technical Literature. Aquateric-Aqueous Enteric Coating. 1986;FMC Corporation, Philadelphia, PA.
11. Frohoff-Hulsmann M.A., Schmitz A., Lippold B.C. Aqueous ethyl cellulose dispersions containing plasticizers of different water solubility and hydroxypropyl methylcellulose as coating material for diffusion pellets. I. Drug release rates from coated pellets. Int. J. Pharm. 177:1999;69-82.
12. Gutiérrez-Rocca J.C., McGinity J.W. Influence of water soluble and insoluble plasticizers on the physical and mechanical properties of acrylic resin polymers. Int. J. Pharm. 103:1994;293-301.
13. Hutchings D., Kuzmak B., Sakr A. Processing considerations for an EC latex coating system: influence of curing time and temperature. Pharm. Res. 11:(10):1994;1474-1478.
14. Hutchings D., Clarson S., Sakr A. Studies of the mechanical properties of free films prepared using an ethylcellulose pseudolatex coating system. Int. J. Pharm. 104:1994;203-213.
15. Karlsson A., Singh S.K. Thermal and mechanical characterization of cellulose acetate phthalate films for pharmaceutical tablet coating: effect of humidity during measurement. Drug. Dev. Ind. Pharm. 24:(9):1998;827-834.
16. Lee J.C. Cellulose Acetate Phthalate. Wade A., Weller P.J., Handbook of Pharmaceutical Excipients. 2nd Edition:1994;91-93 The Pharmaceutical Press, London.
17. Liu J., Williams R.O. Long-term stability of heat-humidity cured cellulose acetate phthalate coated beads. Eur. J. Pharm. Biopharm. 53:(2):2002;167-173.
18. Obara S., McGinity J.W. Influence of processing variables on the properties of free films prepared from aqueous polymeric dispersions by a spray technique. Int. J. Pharm. 126:1995;1-10.
19. Obara S., Maruyama N., Nishiyama Y., Kokubo H. Dry coating: an innovative enteric coating method using a cellulose derivative. Eur. J. Pharm. Biopharm. 47:1999;51-59.
20. Porter S.C. Key factors in the development of modified-release pellet. Ghebre-Sellassie I., Multiparticulate Oral Drug Delivery. Drugs and Pharmaceutical Sciences. Vol. 65:1994;217-284 Marcel Dekker, New York.
21. Raffin F., Duru C., Jacob M., Sistat P., Sandeaux J., Sandeaux R., Pourcelly G., Gavach C. Physico-chemical characterization of the ionic permeability of an enteric coating polymer. Int. J. Pharm. 120:1995;205-214.
22. Raffin F., Duru C., Jacob M. Permeability to hydrogen ions of an enteric coating polymer and interaction of film formulation factors. Int. J. Pharm. 145:1996;247-252.
23. Roxin P., Karlsson A., Singh S.K. Characterization of cellulose acetate phthalate (CAP). Drug Dev. Ind. Pharm. 24:(11):1998;1025-1041.
24. Rynders R.M., Hegedus C.R., Gilicinski A.G. Characterization of particle coalescence in waterborne coatings using atomic-force microscopy. J. Coatings Technol. 57:1995;59-69.
25. Satguru R., Padget J.C., Moreland P.J. The relationship between film formation and anticorrosive properties of latex polymers. Provder T., Winnik M.A., Urban M.W., Film Formation in Waterborne Coatings. 1996;349-358 American Chemical Society, Washington, DC.
26. Stevie F.A. Surface roughness-measurement, formation by sputtering, impact on depth profiling. Brubdle C.R., Evans C.A., Wilson S., Encyclopedia of Materials Characterization. 1992;698-710 Manning, Boston.
27. Thoma K., Bechtold K. Influence of aqueous coatings on the stability of enteric coated pellets and tablets. Eur. J. Pharm. Biopharm. 47:1999;39-50.
28. Vanderhoff J.W., Tarkowski H.L., Jenkins M.C., Bradford E.B. Theoretical consideration of the interfacial forces involved in the coalescence of latex particles. J. Macromol. Chem. 1:(2):1966;361-397.
29. Voyutskii S.S. Amendment to the papers by Bradford, Brown and co-workers: concerning mechanism of film formation from high-polymer dispersions. J. Polym. Sci. 32:1958;528-530.
30. Williams R.O., Liu J. Influence of processing and curing conditions on beads coated with an aqueous dispersion of cellulose acetate phthalate. Eur. J. Pharm. Biopharm. 49:2000;243-252.
31. Williams R.O., Liu J. The influence of plasticization on heat-humidity curing of cellulose acetate phthalate coated beads. Pharm. Dev. Technol. 6:(4):2001;607-619.
32. Williams R.O., Wheatley T.A., Liu J. Influence of plasticization and curing conditions on the mechanical properties of aqueous based cellulose acetate phthalate films. Stp Pharma Sci. 9:1999;545-553.
33. Wu, C., 1999. Influence of non-traditional plasticizers and enteric polymers on the physicochemical and mechanical properties of polymeric films and film coated solid substrates. PhD dissertation. The University of Texas at Austin.