SCOPUS 정보 검색 플랫폼 - 논문 보기

메뉴 건너뛰기

JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing

Volumn 45, Issue 3, 2002, Pages 821-830

Wear reduction effects of Ca sulfonate on coated tools in hobbing

(3) Matsuoka, Hironori a Ono, Hajime b Tsuda, Yoshihiro a

a OITA UNIVERSITY (Japan)

b Yushiro Chemical Industry Co Ltd (Japan)

Author keywords

Ca sulfonate; Crater wear; Cutting; Cutting fluid; EP additive; Finished surface roughness; Fly tool; Fully coated tool; Gear; Hobbing; Tool life

Indexed keywords

COATED TOOLS;

ADDITIVES; CALCIUM COMPOUNDS; CORROSIVE EFFECTS; METALLIC FILMS; SURFACE ROUGHNESS;

WEAR RESISTANCE;

COATING; CUTTING FLUID; CUTTING TOOL; HOBBING; LIFE PREDICTION; TITANIUM NITRIDE; WEAR RESISTANCE;

EID: 0036764141 PISSN: 13447653 EISSN: None Source Type: Journal
DOI: 10.1299/jsmec.45.821 Document Type: Article

Times cited : (2)

References (23)

1
- 4244189072
- Research on cutting oils for hobbing
- in Japanese
- (1970) Prepr. of Jpn. Soc. Mech. Eng , vol.700-701 , pp. 77-80
- Wakuri, A.¹ Ueno, T.² Ainoura, M.³ Katsuki, A.⁴

2
- 0346401071
- The society of cutting fluids and cutting technology
- in Japanese
- (2001) The Proper Use of the Cutting Fluids, Text of the General Meeting, the Society of Cutting Fluids and Cutting Technology , pp. 12-25

3
- 0027338554
- Evaluation of overbased sulfonates as extreme-pressure additives in metalworking fluids
- (1993) Lubr. Eng , vol.49 , Issue.1 , pp. 19-24
- Hong, H.¹ Riga, A.T.² Cahoon, J.M.³ Vinci, J.N.⁴

4
- 0028093746
- The chemistry of sulfonates as metalworking additives
- (1994) Lubr. Eng , vol.50 , Issue.2 , pp. 155-158
- Cahool, J.M.¹ Riga, A.T.² Hong, H.³ Vinci, J.N.⁴

5
- 0038668599
- Effect of cutting oils and influence of tool materials on metal cutting
- in Japanese
- (1994) J. Jpn. Soc. Tribl , vol.39 , Issue.9 PART 1 , pp. 784-791
- Wakabayashi, T.¹ Yokota, H.² Okajima, M.³ Ogura, S.⁴

6
- 0345770017
- Tool wear reduction effect of ca sulfonate in cutting oil for hobbing
- in Japanese
- (2000) Trans. Jpn. Soc. Mech. Eng , vol.66 , Issue.644 C , pp. 1341-1348
- Matsuoka, H.¹ Ono, H.² Tsuda, Y.³ Goto, K.⁴

7
- 0346401066
- in Japanese
- (2001) JSME Machine Design and Tribology Division, The Report of Research , pp. 36-41

8
- 0012158709
- Reports of the Faculty of Engineering Oita University, (in Japanese)
- (1991) Correspondence in Tool Wear Between Hobbing and Cutting Using a Fly-tool , vol.23 , pp. 7-13
- Katsuki, A.¹ Matsuoka, H.²

9
- 85024442341
- Fundamental research on behavior of crater wear on hob in dry hobbing (2nd report, influence of cutting speed)
- in Japanese
- (2000) Trans. Jpn. Soc. Mech. Eng , vol.66 , Issue.648 C , pp. 2832-2839
- Matsuoka, H.¹ Tsuda, Y.²

10
- 0028728619
- Study of boundary film formation with overbased calcium sulfonate by PM-IRRAS spectroscopy
- (1994) Thin Solid Films , vol.252 , pp. 111-119
- Giasson, S.¹ Palermo, T.² Buffeteau, T.³ Desbat, B.⁴ Turlet, M.⁵

11
- 0346401063
- Tool wear reduction effect of sulfonates as additives in cutting oil for hobbing (2nd report)- Influence of total base number
- in Japanese
- (2001) Jour. of the Jpn. Soc. for Precision Eng , vol.67 , Issue.2 , pp. 270-273
- Matsuoka, H.¹ Ono, H.² Tsuda, Y.³

12
- 0345770016
- Tool wear reduction effect of chlorine free additives in cutting oil on coated HSS hob
- in Japanese
- (1999) Trans. Jpn. Soc. Mech. Eng , vol.65 , Issue.633 C , pp. 2102-2109
- Matsuoka, H.¹ Ono, H.² Tsuda, Y.³ Goto, K.⁴

13
- 0001921432
- Der Verschleiß am Wälzfräser
- Jg
- (1971) Industrie-Anzeiger , vol.93 , Issue.99 , pp. 2499-2504
- Hoffmeister, B.¹

14
- 0345770012
- Present situation of coated cutting tools
- in Japanese
- (1986) Tool Engineer , vol.3 , pp. 57-63
- Hirao, M.¹

15
- 0346401064
- (in Japanese), Youkendo
- (1982) An Introduction to the Tribology , pp. 214-217
- Kimura, Y.¹ Okabe, H.²

16
- 0345770013
- On the corrosive wear
- in Japanese
- (1985) Junkatsu (Lubrication) , vol.30 , Issue.7 , pp. 467-471
- Hida, A.¹

17
- 0030082764
- Cutting performance of (Al, Ti) N coated high speed steel tools
- in Japanese
- (1996) Jour. of the Jpn. Soc. for Precision Eng , vol.62 , Issue.2 , pp. 215-218
- Yamada, Y.¹ Aoki, T.² Tanaka, Y.³ Onishi, Y.⁴ Kotani, K.⁵ Wakihira, K.⁶

18
- 0346401062
- Cutting performance of violet coated gear cutters
- in Japanese
- (1998) Kobelco Tool and Technology , vol.1 , pp. 7-10
- Kohno, K.¹ Kawamoto, K.² Hamano, A.³ Onishi, Y.⁴ Tanaka, K.⁵

19
- 0345770011
- Coatings move forward
- (1999) Cutting Tool Engineering , vol.51 , Issue.1 , pp. 22-29
- Weiner, M.¹

20
- 0347661914
- Influence of coating films on behavior of crater wear of hob in dry hobbing
- in Japanese
- (2001) Trans. Jpn. Soc. Mech. Eng , vol.67 , Issue.656 C , pp. 1163-1169
- Matsuoka, H.¹ Tsuda, Y.²

21
- 0347031111
- Effect of small quantity inclusions in steels on the wear of ceramic tools
- in Japanese
- (1976) Jour. Jpn. Soc. Precision Eng , vol.42 , Issue.3 , pp. 221-226
- Narutaki, N.¹ Murakoshi, A.²

22
- 0346401060
- Analysis of performance of staggered tooth hob
- (in Japanese), Kobe Steel
- (1974) Kougugihou , vol.22 , pp. 14-26
- Kawai, H.¹ Torii, N.² Sawa, Y.³

23
- 0018313875
- Research on wear of hob cutting edge (on the mechanism of occurrence of corner wear)
- in Japanese
- (1979) Trans. Jpn. Soc. Mech. Eng , vol.45 , Issue.389 , pp. 129-135
- Hidaka, K.¹ Ueno, T.² Terashima, K.³

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.