Ignition of wood: A review of the state of the art

Journal of Fire Protection Engineering

Volumn 12, Issue 3, 2002, Pages 163-189

  Babrauskas, Vytenis ^a  

^a Fire Science and Technology Inc   (United States)

Author keywords

Cone calorimeter; Glowing combustion; Ignition; Setchkin furnace; Wood

Indexed keywords

FLAME RESEARCH; FLAME RETARDANTS; HEAT FLUX; IGNITION; TEMPERATURE; WOOD;

CONE CALORIMETER; DIRECT FLAMING IGNITION MODES; GLOWING COMBUSTION; SETCHKIN FURNACE; SOLID WOOD;

FIRE PROTECTION;

FIRE PROTECTION; FLAME RETARDANTS; IGNITION; WOOD;

EID: 0036705712     PISSN: 10423915     EISSN: None     Source Type: Journal    
DOI: 10.1177/10423910260620482     Document Type: Article

References (90)

1. "Standard Test Method for Determining Ignition Temperature of Plastics (ASTM D 1929)," American Society for Testing and Materials, West Conshohocken, PA.
2. Hill, H.B. "On the Behavior of Sound and Decayed Wood at High Temperatures," Proc. Amer. Acad. Arts and Sciences, Vol. 22, 1887, pp. 482-492.
3. Bixel Edward, C. and Moore, Howard, J. "Are Fires Caused by Steam Pipes?." (B.S. Thesis), Case School of Applied Science, Pittsburgh, 1910.
4. Banfield, W.O. and Peck, W.S. "The Effect of Chemicals on the Ignition Temperature of Wood," Canadian Chemistry and Metallurgy, Vol. 6, 1922, pp. 172-176.
5. Brown, C.R. "The Determination of the Ignition Temperatures of Solid Materials," (D.Sc. Thesis), The Catholic University of America, Washington, 1934.
6. VanKleeck, A. "A Preliminary Study of Ignition Temperatures of Finely Chopped Wood (Project L-179)," Forest Products Lab., Madison, WI, 1936.
7. As cited in: "Wood and Wood-Based Products," J.M. Cholin, ed., Fire Protection Handbook, A.E. Cole and J.L. Linville, eds., 18th Edn., National Fire Protection Assn., Quincy MA, 1997.
8. Graf, S.H. "Ignition Temperatures of Various Papers, Woods, and Fabrics," Oregon State College Bull, 26, Oregon State College, Corvallis, March 1949.
9. Angell, H.W., Gottschalk, F.W. and McFarland, W.A. "Ignition Temperature of Fireproofed Wood, Untreated Sound Wood and Untreated Decayed Wood," British Columbia Lumberman, Vol. 33, 1949, pp. 57-58, 70-72.
10. Fons, W.L. "Heating and Ignition of Small Wood Cylinders," Ind. and Eng. Chem., Vol. 42, 1942, pp. 2130-2133.
11. Narayanamurti, D. "A Note on Pyrolysis and Ignition of Wood," Current Science, Vol. 27, 1956, pp. 22-23.
12. Thomas, P.H., Simms, D.L. and Theobald, C.R. "The Interpretation of Some Experimental Data on the Ignition of Wood," Fire Research Note No. 411, Fire Research Station, Borehamwood, UK, 1959.
13. Akita, K. Studies on the Mechanism of Ignition of Wood," Report of the Fire Research Institute of Japan, Vol. 9, 1959, pp. 1-44, 51-54, 77-83, 99-105.
14. Simms, D.L. "Ignition of Cellulosic Materials by Radiation," Combustion and Flame, Vol. 4, 1960, pp. 293-300.
15. Moran, H.E. jr. "Effectiveness of Water Mists for Protection from Radiant Heat Ignition," NRL Report 5439, US Naval Research Laboratory, Washington, 1960.
16. Patten, G.A. "Ignition Temperatures of Plastics," Modern Plastics, Vol. 38, July 1961, pp. 119-122, 180.
17. Buschman, A.J. "Ignition of Some Woods Exposed to Low Level Thermal Radiation," NBS Report 7306, Natl. Bur. Stand., Washington, DC, 1961.
18. Shoub, H. and Bender, E.W. "Radiant Ignition of Wall Finish Materials in a Small Home," NBS 8172, Natl. Bur. Stand. Washington, DC, 1964.
19. Tinney, E.R. "The Combustion of Wooden Dowels in Heated Air," in 10th Symp. (Intl.) on Combustion, The Combustion Institute, Pittsburgh, 1964, pp. 925-930.
20. Simms, D.L. and Law, M. "The Ignition of Wet and Dry Wood by Radiation," Combustion and Flame, Vol. 11, 1967, pp. 377-388.
21. Muir, W.E. "Studies of Fire Spread between Buildings," (PhD Dissertation), University of Saskatchewan, Saskatoon, Canada, 1967.
22. Koohyar, A.N. "Ignition of Wood by Flame Radiation," (PhD Dissertation), Univ. Oklahoma, Norman, 1967.
23. Melinek, S.J. "Ignition Behaviour of Heated Wood Surfaces," FR Note 755, Fire Research Station, Borehamwood, UK, 1969.
24. Jach, W. "Das Verhalten von Holz und Holzwerkstoffen bei Dauereinwrikung von Temperaturen unterhalb des Flamm-und Brennpunktes," Mitteilungen der Deutschen Gesellschaft für Holzforschung, Nr. 56, 12-17, 1969.
25. Smith, W.K. and King, J.B. "Surface Temperature of Materials during Radiant Heating to Ignition," J. Fire and Flammability, Vol. 1, 1970, pp. 272-288.
26. Atreya, A. "Pyrolysis, Ignition and Fire Spread on Horizontal Surfaces of Wood," (PhD Dissertation), Harvard University, Cambridge, MA, 1983.
27. Atreya, A., Carpentier, C. and Harkleroad, M. "Effect of Sample Orientation on Piloted Ignition and Flame Spread," in Fire Safety Science - Proc. 1st Intl. Symp., Hemisphere, Washington, 1986, pp. 97-109.
28. Abu-Zaid, M. "Effect of Water on Ignition of Cellulosic Materials," (Ph.D. Thesis), Michigan State Univ., East Lansing, MI, 1988.
29. Janssens, M.L. "Fundamental Thermophysical Characteristics of Wood and Their Role in Enclosure Fire Growth," (PhD dissertation), University of Gent, Belgium, 1991.
30. Li, Y. and Drysdale, D. "Measurement of the Ignition Temperature of Wood," in Fire Science and Technology - Proc. First Asian Conf., Intl. Academic Publishers, Beijing, 1992, pp. 380-385.
31. Masařík, I. "Ignitability and Burning of Plastic Materials: Testing and Research," in Interflam '93, Interscience Communications Ltd., London, 1993, pp. 567-577.
32. Fangrat, J., Hasemi, Y., Yoshida, M. and Hirata, T. "Surface Temperature at Ignition of Wooden Based Slabs," Fire Safety J., Vol. 27, 1996, pp. 249-259;
33. Fangrat, J., Hasemi, Y., Yoshida, M. and Hirata, T. "Surface Temperature at Ignition of Wooden Based Slabs," Fire Safety J., Vol. 28, 1997, pp. 379-380.
34. Moghtaderi, B., Novozhilov, V., Fletcher, D.F. and Kent, J.H. "A New Correlation for Bench-Scale Piloted Ignition Data of Wood," Fire Safety J., Vol. 29, 1997, pp. 41-59.
35. "Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products using an Oxygen Consumption Calorimeter (E 1354)," American Society for Testing and Materials, West Conshohocken PA
36. Spearpoint, M.J. "Predicting the Ignition and Burning Rate of Wood in the Cone Calorimeter Using an Integral Model," NIST GCR 99-775, Nat. Inst. Stand. and Technol., Gaithersburg MD, 1999.
37. Prince, R.E. "Tests on the Inflammability of Untreated Wood and of Wood Treated with Fire-Retarding Compounds," Proc. NFPA, Vol. 19, 1915, pp. 108-158.
38. Buchanan, M.A. "The Ignition Temperature of Certain Pulps and Other Wood Components," TAPPI, Vol. 35, 1952, pp. 209-211.
39. Urbas, J. and Parker, W.J. "Surface Temperature Measurements on Burning Wood Specimens in the Cone Calorimeter and the Effect of Grain Orientation," Fire and Materials, Vol. 17, 1993, pp. 205-208.
40. Shafizadeh, F. "Utilization of Biomass by Pyrolytic Methods," in Proc. TAPPI 1997 Joint Forest Biology/Wood Chemistry Mtg., Madison WI, 1977, pp. 191-199.
41. Bilbao, R., et al. "Experimental and Theoretical Study of the Ignition and Smoldering of Wood Including Convective Effects," Combustion and Flame, Vol. 126, 2001, pp. 1363-1372.
42. Janssens, M. "Piloted Ignition of Wood: A Review," Fire and Materials, Vol. 15, 1991, pp. 151-167.
43. Baer, A.D. and Ryan, N.W. "Ignition of Composite Propellants by Low Radiant Fluxes," AIAA J., Vol. 3, 1965, pp. 884-889.
44. Lengellé G., Bizot, A., Duterque, J. and Amiot, J.-C. "Ignition of Solid Propellants," La Recherche Aérospatiale - English Edition, No.2, 1991, pp. 1-20.
45. Moussa, N.A., Toong, T.Y. and Garris C.A. "Mechanism of Smoldering of Cellulosic Materials," in 16th Symp. (Intl.) on Combustion, The Combustion Institute, Pittsburgh, 1976, pp. 1447-1457.
46. Fredlund, B. "A Model for Heat and Mass Transfer in Timber Structures during Fire," Report LUTVDG/TVGG-1003, Dept. of Fire Safety Engineering, Lund University, Lund, Sweden, 1988.
47. Ohlemiller, T.J. "Modeling of Smoldering Combustion Propagation," Prog. Energy and Comb. Sci., Vol. 11, 1985, pp. 277-310.
48. Khitrin, L.N. "Physics of Combustion and Explosion," Israel Program for Scientific Translation, Jerusalem, 1962.
49. Smith, I.W. "The Combustion Rates of Coal Chars: A Review," in 19th Symp. (Intl.) on Combustion, The Combustion Institute, Pittsburgh, 1982, pp. 1045-1065.
50. Yuen, R.K.-K. "Pyrolysis and Combustion of Wood in a Cone Calorimeter," (PhD Dissertation), The University of New South Wales, Australia, 1998.
51. Long, R.R. jr., Torero, J.L., Quintiere, J.G. and Fernandez-Pello, A.C. "Scale and Transport Considerations on Piloted Ignition of PMMA," in Fire Safety Science - Proc. 6th Intl. Symp., Intl. Assn. for Fire Safety Science, 2000, pp. 567-578.
52. Hu, X.-F. and Clark, F.R.S. "The Use of the ISO/TC92 Test for Ignitability Assessment," Fire and Materials, Vol. 12, 1988, pp. 1-5
53. Mikkola E. "Ignitability Comparisons between the ISO Ignitability Test and the Cone Calorimeter," J. Fire Sciences, Vol. 9, 1991, pp. 276-284.
54. Nussbaum, R.M. and Östman, B.A.-L. "Larger Specimens for Determining Rate of Heat Release in the Cone Calorimeter," Fire and Materials, Vol. 10, 1986, pp. 151-160.
55. Hallman, J.R. "Ignition Characteristics of Plastics and Rubber," (PhD Dissertation), University of Oklahoma, Norman, 1971.
56. Peck, E.C. "Moisture Content of Wood in Dwellings," Circular No. 239, US Dept. of Agriculture, Washington, 1932.
57. Henderson, A. "Predicting Ignition Time Under Transient Heat Flux Using Results from Constant Heat Flux Experiments," Fire Engineering Research Report 98/4, School of Engineering, University of Canterbury, New Zealand, 1999.
58. Shields, T.J., Silcock, G.W. and Murray, J.J. "The Effects of Geometry and Ignition Mode on Ignition Times Obtained Using a Cone Calorimeter," Fire and Materials, Vol. 17, 1993, pp. 25-32.
59. Mikkola, E. "Puupinnan syttyminen," Research Notes 1087. Valtion Teknillinen Tutkimuskeskus, Espoo, Finland, 1989.
60. Dlugogorski, B., Pope, D.M., Moghtaderi, B., Kennedy, E.M. and Lucas, J.A. "A Study on Fire Properties of Australian Eucalyptus," in Wood and Fire Safety - 4th Intl. Scientific Conf., The High Tatras, Slovak Republic, 2000, pp. 57-72.
61. Janssens, M.L. private communication, 2001.
62. Babrauskas, V. unpublished NIST test results.
63. Grexa, O. private communication, 2001.
64. Wesson, H.R. "The Piloted Ignition of Wood by Radiant Heat," (D.Eng. dissertation), Univ. Oklahoma, Norman, 1970.
65. McGuire, J.H. Fire and the Spatial Separation of Buildings, Fire Technology, Vol. 1, 1965, pp. 278-287.
66. Pickard, R.W., Simms, D.L. and Walters, J.E.L. "The Ignition by Radiation of Wood Protected by Some Common Paints," FPE Note No. 61/1951, Fire Research Station, Borehamwood, 1951.
67. Simms, D.L. and Hird, D. "On the Pilot Ignition of Materials by Radiation," FR Note 365, Fire Research Station, Borehamwood, England, 1958.
68. Lawson, D.I. and Simms, D.L. "The Ignition of Wood by Radiation," Brit. J. Appl. Phys., Vol. 3, 1952, pp. 288-292.
69. Simms, D.L. "On the Pilot Ignition of Wood By Radiation," Combustion and Flame, Vol. 7, 1963, pp. 253-261.
70. Simms, D.L. "Experiments on the Ignition of Cellulosic Materials by Thermal Radiation," Combustion and Flame, Vol. 5, 1961, pp. 369-375.
71. Simms, D.L. and Law, M. "The Ignition of Wet and Dry Wood by Radiation," Combustion and Flame, Vol. 11, 1967, pp. 377-388.
72. Simms, D.L. "Ignition of Cellulosic Materials by Radiation," Combustion and Flame, Vol. 4, 1960, pp. 293-300.
73. Bryan, J. "The Fire Hazard," Wood, Vol. 8, 1943, pp. 260-262.
74. Wilson, J.A. "A Different View on Plastics Fire Hazard Classification," NFPA Q., Vol. 55, October 1962, pp. 162-164.
75. Tsantaridis, L., "CEN Tablet Test Results for Wood Floorings," L-Rapport 9702009, Trätek, Stockholm, 1997.
76. Tsantaridis, L. "CEN Ignitability Test Results for Wood Building Products," L-Rapport 9702010. Trätek, Stockholm, 1997.
77. Ebeling, K.L. "Ignition of Wood by Direct Flame Contact," (M.S. Thesis), Univ. Oklahoma, Norman, 1973.
78. Kinbara, T. and Sue, S. "On the Outbreak of Fire Due to Leakage of Electricity from Neon Transformer through Planking," [in Japanese], Bull. Fire Prev. Soc. of Japan, Vol. 2, No. 2, 1953, pp. 39-41.
79. Kinbara, T. and Takizawa, K. "Ignition of a Salt-soaked Wooden Board by an Electric Current through It," [in Japanese], Bull. Fire Prev. Soc. of Japan, Vol. 11, No. 2, Dec. 1961, pp. 26-31.
80. Sanderson, J.L. "Carbon Tracking: Poor Insulation Combined with Contaminants is Potential Fire Cause," Fire Findings, Vol. 8, No. 3, 2000, pp. 1-3.
81. Blackburn, T.R. and Pau, L.T. "Characteristics of a Simulated High Impedance Fault," in Electric Energy Conf. 1985, Newcastle, Australia, 1985, pp. 301-304.
82. Kashiwagi T. "Experimental Observation of Radiative Ignition Mechanisms," Combustion and Flame, Vol. 34, 1979, pp. 231-244.
83. "Critical Radiant Exposures for Ignition of Tinder and Combustible Materials (Part I - Wood)," Naval Applied Science Lab., Brooklyn NY, 1965.
84. Ohlemiller, T.J. "Smoldering Combustion," NBSIR 85-3294, Natl. Bur. Stand., Gaithersburg, MD, 1986.
85. Ohlemiller, T.J. "Smoldering Combustion Propagation on Solid Wood," in Fire Safety Science - Proc. 3rd Intl. Symp., Elsevier, New York, 1991, pp. 565-574.
86. McArthur, N.A. and Lutton, P. "Ignition of Exterior Building Details in Bushfires: An Experimental Study," Fire and Materials, Vol. 15, 1991, pp. 59-64.
87. Dowling, V.P. "Ignition of Timber Bridges in Bushfires," Fire Safety J., Vol. 22, 1994 pp. 145-168.
88. Hamada, M. et al. "Experiments on the Ignition due to Fire Brands," [In Japanese], Fire Research - Reports from the Fire Science Research Committee, Property and Casualty Insurance Rating Organization of Japan, Tokyo, 1951.
89. Babrauskas, V. and Hall, J. unpublished test work. 2000.
90. Brabrauskas, V. "Pyrophoric Carbon⋯ The Jury is Still Out," Fire and Arson Investigator, Vol. 51, No. 2 Jan. 2001., 12-14.