Polyimides derived from diisocyanates

Iranian Polymer Journal (English Edition)

Volumn 11, Issue 4, 2002, Pages 215-236

  Barikani, Mehdi ^a  

^a IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

AEROSPACE ENGINEERING; COMPUTER SIMULATION; GELS; MICROELECTRONICS; THERMODYNAMIC STABILITY;

DIISOCYANATES;

POLYIMIDES;

EID: 0036663703     PISSN: 10261265     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (105)

1. Economy J.E., Diller R.D., Volksen W., and Yoon D.Y., "Process for coating a substrate with polyimide", U.S. Patent 4,467,000 (1984).
2. Numata S., Fujisaki K., Kinfo N., Imaizuma J., and Mikami Y., "Low thermal expansion resin material and composite shaped article", U.S. Patent 4,690,999 (1991).
3. Numata S., Fujisaki K., Mikami D., and Kinjo N., Recent Advances in Polyimide Science and Technology, Weber W.D., and Gupta M.R., Eds; Mid-Hudson Section of Soc. of Plast. Eng., Poughkeppsie, New York, 164 (1987).
4. Hedrick J.L., Volksen W., and Mohanty D.K., "Adhesion characteristics of imide-aryl ether ketone block copolymers with poly(ether-imide)", Polym. Bull. 30, 1, 33 (1993).
5. Auman B.C., Advances in Polyimide Science and Technology, Feger C., Khojasteh M.M., and Htoo M.S., Eds; Technomic, Lancaster, PA, 75 (1993).
6. Auman B.C., "Synthesis and properties of fluoromated polyimides from novel 2,2′-bis(fluoroalkoxy) benzidines", Macromolecules 26, 2779 (1993).
7. Stern S.A., et al., "Structure/permeability relationships of polyimide membranes, applications to the separation of gas mixtures", J. Polym. Sci., Polym. Phys. Ed., 27, 1887-1909 (1989).
8. Okamoto K., Tanaka K., Nakamura A., Kusuki Y., and Kita H., "The effect of morphology on sorption and transport of carbon dioxide in a polyimide from 3,3′,4,4′-biphenyltetra-carboxylic dianhydride and 4,4′-oxydianiline" J. Polym. Sci., Polym. Phys., 27, 1221-1233 (1989).
9. Mecham S.I., Roger M.E., Kim Y., and McGrath J.E., "Gas permeability of high performance homo and co-polymers", Polymer Preprints, 3, 628 (1993).
10. Sastri V.R. and Tesoro G.C., "Recoverable polyimide resins", J. Polym. Sci., Polym. Lett., 27, 153-159 (1989).
11. Bessonov M.I., Koton M.M., Kudryavtsev V.V., Laius, L.A., Polyimides: Thermally Stable Polymers, Consultants Bureau, New York, 23 (1987).
12. Adrova N.A., Bessonov M.I., Laius L.A., Rudako A.P., Eds; "Polyimides: A new class of thermally stable polymers", in: Prog. Polym. Sci. Series, 7, Technomic, Stamford, CT (1979).
13. Feger C., Khojasteh M.M., McGrath J.E. Eds; Polyimides: Materials, Chemistry and Characterization., Elsevier, Amsterdam (1989).
14. Wilson D., Stenzenberger H.D., Hergenrother P.M., Eds; Polyimides. Blackie, Glasgow (1990).
15. Mittal K., Ed., Polyimides: Synthesis, Characterization and Applications. Plenum, New York, 1 and 2 (1984).
16. Weber W.D., and Gupta M.R., Eds; Recent Advances in Polyimide Science and Technology., Mid-Hudson Chapter of the Soc. of Plast. Eng, Poughkeppsie, New York (1987).
17. Feger C., Khojasteh M.M., et al., Advances in Polyimide Science and Technology., Technomic, Lancaster, PA, 1993.
18. Wurtz A., Trans: "Preparation of ethylamine diacetamide by reaction of acetic anhydride and ethyl isocyanate", Liebigs Ann., 42, 3, 554 (1854).
19. Hurd C.D., and Prapas A.G., "Preparation of acrylic imides" J. Org. Chem. 24, 333 (1959).
20. Farrissey W.J., Rose J.S., and Carleton P.S., "Preparation of polyimide foam", Polymer Prepr. 9, 1581, 1968. Also J. Appl. Polym. Sci., 14, 1, 1093 (1970).
21. Farrissey W.J., Rose J.S., and Carleton P.S., "Preparation of polyimide foam", Polymer Prepr. 9, 1581, 1968. Also J. Appl. Polym. Sci., 14, 1, 1093 (1970).
22. Muller G. and Merten R., "Process for preparing amide containing polyisocyanates", U.S. Pat. 3,314,923 (1967).
23. Meyers R.A., "The polymerization of pyomellitic dianhydride with diphenylmethane diisocyanate", Polym. Sci., Part A-1, 7, 2757, 1969.
24. Carleton P.S., Farrissey W.J., and Rose J.S., "The formation of polyimides from anhydrides and isocyanates", J. Appl. Polym. Sci., 16 2983 (1972).
25. Alberino L.M., Farrissy W.J., and Rose J.S., "Copolyimides of benzophenone tetracarboxylic acid dianhydride and mixture of diisocyanates", U.S. Patent, 3, 708, 458 (1973).
26. Alvino W.M. and Edelman L.E., "Polyimides from diisocyanates, dianhydrides, and tetracarboxylic acids", J. Appl. Polym. Sci, 19, 2961 (1975).
27. Edelman L.E. and Alvino W.M., "Polyimide and polyamide-imide precursors prepared from esters, dianhydrides, and diisocyanates", U.S. Pat 3,952, 084 (1976).
28. Onder B.K., "Preparation of polyimide from organic diisocyanate with alkali metal salt of alcohol as catalyst", U.S. Pat. 4,001,186 (1977).
29. Corbett J.M. and Dechow F.J., "Method for making crosslinked resin foams from an ethylenically unsaturated dicarboxylic acid anhydride and a polyisocyanate", U.S. Pat. 4,110,274 (1978).
30. Muller G. and Merten R., "Process for the preparation of trimellitic acid imide", U.S. Pat. 3,445,477 (1969).
31. Takekoshi T. and Manello J.S., "Method for making polyetherimides", U.S. Pat. 3,833,544 (1974).
32. Onder B.K., "Preparation of polyamideimide from organic diisocyanate with alkali metal salt of alcohol as catalyst", U.S. Pat. 4,061,623 (1977).
33. Onder B.K., "Alkali metal lactamate catalyst for the polymerization of diisocyanate with tetracarboxylic acid / dianhydride", U.S. Pat. 4,021,412 (1977).
34. Onder B.K., "Preparation of polyamideimide from diisocyanate with alkali metal lactamate catalyst", U.S. Pat. 4,094,864 (1978).
35. Ulrich H., "Synthesis of polymers from isocyanates in polar solvents", J. polym. Sci. Macromol. Rev., 11, 93-133 (1976).
36. Weiner M.L., "Reaction of phenyl isocyanate N-N-dimethylformamide", J. Org Chem 25, 2245 (1960).
37. D' Alelio G.F., "Chain - extending polyimides with aromatic polyisocyanates", U.S. Pat., 4,026,833 (1977).
38. Farrissey W.J., McLaughlin A., and Rose J.S., "Process for cellular polymers containing imide groups", U.S. Pat. 3,562,189 (1971).
39. Rosser R.W., "Polyimide foam for thermal insulation and five protection", U.S. Pat. 3,772,216 (1973).
40. Baker A.M., "Method for making crosslinked resin foams from at least one dicarboxylic acid, at least one ethylenically unsaturated dicarboxylic acid anhydride and a polyisocyanate", U.S. Pat., 4,108,810 (1978).
41. Riccitiello S.R., Sawko P.M., and Estrella C.A., "Catalysts for polyimide foams from aromatic isocyanates and aromatic dianhydrides", U.S. Pat. 4, 177,333 (1979).
42. Frosch R.A., Sawko P.M., Riccitiello S.R., and Hamermesh C.L., "Ambient cure polyimide foams prepared from aromatic polyisocyanates, aromatic polycarboxylic compounds, furfuryl alcohol, and a strong inorganic acid", U.S. Pat. 4,184,021 (1980).
43. Ghatge N.D. and Mulink "Polyimides from diisocyanates and dianhydride", U.P; J. Polym. Sci, Polym Chem, Ed. 18, 1905 (1980).
44. Khune G.D., "Preparation and properties of polyimides from diisocyanates", J. Macromol Sci., Chem. A14, 5, 687 (1980).
45. Pauze D.R. and Zamek O.S., "Hot-melt polyesterimide-polyisocyanate electrical containing compositions", U.S. Pat. 4,296,229 (1981).
46. Pauze D.R. and Zamek O.S., "Hot-melt polyesterimide-polyisocyanate electrical coating compositions", U.S. Pat. 4,389,457 (1983).
47. Durairaj B. and Venkatarao K., "Synthesis and characterization of some new polyimides", J. Polym. Sci., Part A, 19, 8, 2105-2109 (1981).
48. Lee C.L., "Precoss for preparing polyimides end-capped with anhydride or isocyanate groups", U.S. Pat. 4,421,965 (1983).
49. Zecher W., Dhein R., and Reinking K., "Polyamideimides produced from either lactams or polyamides with isocyanates and anhydrides as thermoplasts", U.S. Pat. 4,549,006 (1985).
50. Masiulanis B. and Zbelinski R., "Mechanical thermal and electric properties of polyurethaneimide elastomers", J. Appl. Polym. Sci., 30, 7, 2731-2741 (1985).
51. Masiulanis B., et al., "Dynamic mechanical behaviour and structure of polyurethaneimides", J. Appl. Polym. Sci., 34, 5, 1941-1951 (1987).
52. Kilic S., et al., "Polyimides via the direct reaction of diisocyanates and dianhydrides", Am. Chem. Soc. Polym. Prepr. 27, 1, 318 (1986).
53. Zecher W., Dhein R., and Reinking K., "Process for the production of polyamideimides from polyisocyanates. polycarboxylic acid anhydrides and lactams or polyamides in which the reaction products are precipitated with a non-solvent", U.S. Pat. 4,624,981 (1986).
54. Zecher W., Dhein R., and Reinking K., "Polyamideimides produced from either lactams or polyamides with isocyanates or anhydrides in which products are precipitated with a non-solvent", U.S. Pat. 4,628,079 (1986).
55. Stankovic S., Guerra G., Williams D.J., Karasz F.E., and Macknight W.J., "Miscible blends of polybenzimidazole and a diisocyanate-based polyimide", Polym. Commu., 29, 1, 14-16 (1988).
56. Parker J.A., Feldman R., and Bryant R.L., "Thermally adaptive polymers and prepolymers and methods of making in which an imide is formed from a polyanhydride oligomer and an isocyanate", U.S. Pat. 4,687,785 (1987).
57. Kakimoto M., Akiyama R., Negi Y.S., and Imai Y., "Preparation of polyimide by high temperature solution polymerization from pyromellitic dianhydride and 2,5-bis(4-isocyanatophenyl)-3,4-diphenylthiophene", J. Polym. Sci, Part A, Polym. Chem., 26, 99 (1988).
58. Nelissarris A. and Mikroyannidis J.A., "New crosslinkable polyimides, polyamides and polyurethane derived from 2,4,6-tris (4-aminophenoxy)-S-triazine", Eur. Polym. J., 25, 5. 455-460 (1989).
59. Lin J.K., et al., and Konodo S., "Synthesis and characterisation of new comb-like aromatic polyamides, polyimides and polyureas containing 1,3,5-triazine rings with two long alkyl groups in their side chains", Polym. J (Japan), 21, 9. 709-17 (1989).
60. Lin J.K., Yuki Y., Kunisada H., Miyagawa C., and Konodo S., "Synthesis and characterisation of new comb-like aromatic polyamides based on 2.4-bis(amino-N-octadecyl-amilino)-6-substituted-1,3,5-triazines", Polym. J, 22, 1, 47-55 (1990).
61. Lin J.K., Yuki Y., Kunisada H., Miyagawa C., and Konodo S., "Synthesis and characterisation of new comb-like polyguanamines containing three long alkyl side chains in repeating unit", Polym. J, 22, 2, 92-102 (1990).
62. Imai Y. and Kakimoto M., "Soluble high-temperature polymers containing a tetraphenylthiophene unit", Polym. Plast. Technol. Eng. 28, 4, 271 (1989).
63. 13C-CP-MAS-NMR Spectra of pyromellitic and of its precursor based on 4.4-diamino diphenylmethane", Eur. Polym. J., 26, 9, 941-5 (1990).
64. Okoroafor M.O. and Kaczmarski J.P., "Synthesis and structure-property relationships in thermostable poly(imide-urea) copolymers", Polym. Prepr 31. 1. 622-623 (1990).
65. Koenitzer B.A., "Polyurethane-imide membranes and their use for the separation of aromatics from non-aromatics", U.S. Pat. 4,929,358 (1990).
66. Lay W., Weinrotter K., "Flame-retardant, high-temperature resistant foams of polyimides", U.S. Pat. 5, 153, 234 (1992).
67. Avadhani C.V., Wadgaonkar P.P., and Vernekar S.P., "Synthesis and characterization of formal-group containing diisocyanates and polyimides therefrom", J. Appl. Polym. Sci., 45, 8, 1335-40 (1992).
68. Sanwade B.D., et al., "Polyimides containing S-triazine rings in the main chain: Synthesis and characterization", Polym., Int., 30.3, 305-308 (1993).
69. Volksen W., "Condensation polyimides: Synthesis, solution behaviour, and imidization characteristics", Adv. Polym. Sci, 117, 111-64 (1994).
70. Wang H.H. and Chem J.C., "Chemical modification of epoxy resin by reaction with anhydride-terminated poly-urethane-imide", Polym. Plast. Technol. Eng., 33, 5, 637-651 (1994).
71. Wang H.H. and Su C.C., "Synthesis of thermostable Nomex copoly(amide-imide) and their properties", J. Appl. Polym. Sci., 61, 7, 1087-1096 (1996).
72. Wang H.H. and Lin W.P., "Synthesis and properties of thermostable naphthalate containing copoly (amide-imide)s", J. Appl. Polym. Sci., 65, 8, 1581-1593 (1997).
73. Jung J.C. and Park S.B., "Synthesis and characterization of polyimides from imidazole-blocked 2,5-bis(n-alkoxy-methyl)-1,4-benzene diisocyanates and pyrome llitic dianhydride", J. Polym. Sci., Part: Polym. Chem., 34, 3, 357-365 (1996).
74. Yung M.H., Nien K.E., and Chu T.J., "Flexibility improvement of a polyamide resin by using urethane", J. Polym. Eng. 16, 1/2, 149-59 (1996).
75. Nine K.E., Yang M.H. and Chu T.J., "Effect of reaction conditions on the synthesis and properties of polypyromellitimide", J. Polym. Eng. 17, 1, 23-37 (1997).
76. Hay J.N. and Woodfine B., "Polyimide and a method of preparing polyamide from tetracarboxylic dianhydride and diisocyanate", U.S. Pat. 5,614,607 (1997).
77. Michaud P., Perier M.E., and Russo J., "Process for spining from solution of polyamide-imides (PAI) based on tolylene or melt-phenylene diisocyanates and fibres thus obtained", U.S. Pat. 5,756,635 (1998).
78. Marek M., Jr H.P., Schmidt P., Schneider B., Kovarova J., Kelnar I., Pytela J., and Sufcak M., "Synthesis and properties of polyimides containing polybutadiene blocks", Polym. Int, 48, 6, 495-501 (1999).
79. Scortanu E., Caraculacu G., and Caraculacu A.A., "Dibenzyl structure on the macromolecular chains (VII) Heterocyclic polymers from 2,2,4,4-dibenzoyl tetramine", Iran. Polym. J., 7, 4, 243-253 (1998).
80. Yotsuya S. et al., "Polyamide-imides, their manufacture, and heat resistant coatings thereform", JP 10060076 A2 3 (1998).
81. Barikani M. and Mehdipour Atai Sh., "Preparation and properties of polyimides and polyamide-imides from diisocyanates", J. Polym. Sci., Part A, Polym. Chem. 37, 13, 2245-2250 (1999).
82. Barikani M., Yeganeh H. and Mehdipour Atai Sh., "Synthesis and characterization of new soluble and thermostable polyimides via novel diisocyanates", Polym. Int., 48, 12, 1264-1268 (1999).
83. Wang H.H. and Wu S.P., "Synthesis of aromatic poly(urea-imide) with heterocyclic side-chain structure", J. Appl. Polym. Sci., 74, 7, P 1719-1730 (1999).
84. Wang H.H. and Lin G.C., "Synthesis of aromatic poly(urea-imide) copolymers containing para-meta benzoic structure", J. Appl. Polym. Sci., 73, 13, 2671-2679 (1999).
85. Zuo M. and Takeichi T., "Preparation and characterization of poly(urethane-imide) films prepared from reactive polyimide and polyurethane prepolymer", Polymer, 40, 18, 5153-5160 (1999).
86. Takeich T., et al., "Preparation and properties of porous polyimide films prepared by the pyrolysis of poly(urethane-imide) films", J. Photopolym. Sci. Technol., 12, 2, 203 (1999).
87. Yeganeh H. and Barikani M., "Preparation and properties of novel processable polyimides derived from N,N-bis(isocyan-atoalkyl)-1,2,4,5-benzenetetracarboxylic-1,2,4,5-diimides", Polym. Int., 49, 514-518 (2000).
88. Yeganeh H., Barikani M., and Noel Khodabadi F., "Novel imide-modified polyurethanes, synthesis and thermal characteristics", Iran. Polym. J. 9, 4, 249-254 (2000).
89. Barikani M. and Mehdipour Atai Sh., "Aromatic/ cycloaliphatic polyimides and polyamide-imide from trans-1,4-cyclohexane diisocyanate: Synthesis and properties", J. Appl., Polym. Sci., 77, 1102-1107 (2000).
90. Yeganeh H. and Mehdipour Atai Sh., "Preparation and properties of novel processable polyimides derived from a new diisocyanate", J. Polym. Sci., Part A, Polym. Chem. 38, 9, 1528-1532 (2000).
91. Subramani S., Nasar A.S., Gnanaragan T.P., Iyer N.P., and Radhakrishnan G., "Structure-property relationship of blocked diisocyanates: Synthesis of polyimides using imidazole - blocked isocyanates", Polym. Int., 49, 6, 546-550 (2000).
92. Asai K., Inoue S.I., and Okamoto H., "Preparation and properties of imide-containing elastic polymers from elastic polyureas and pyromellitic dianhydride", J. Polym. Sci., Part A: Polym. Chem., 38, 4, 715 (2000).
93. Zhu N., Yu S., Yin J., Liu Y.G., Zhu Z.K., and Wang Z.G., Gaodeng Xuexiao Huaxve Xuebao; Synthesis and characterization of poly(urethane-imide)s containing a disperse red type chromophore in the side-chain. 21, 11, 1771-1775 (2000).
94. Yeganeh H. and Barikani M., "Preparation and properties of poly(urethane-imide)s derived from diisocyanates containing build-in imide rings", Iran. Polym. J., 10, 1, 21-21 (2001).
95. Bibiao J., Jianjun H., Wenyan W., Luxia J., and Xinxian C., "Synthesis and thermal properties of poly(urethane-imide)", J. Appl. Polym. Sci., 81, 773-781 (2001).
96. Choi K.Y., Yi M.H., Jin M.Y., Jung J.T., Park J.G., and Ihm D.W.; "Soluble polyimide resin having a dialkyl substituent for a liquid crystal alignment layer, the monomers and manufacturing methods thereof', U.S. Pat. 6,162,893 (2000).
97. Barikani M., Mehdipour Atai Sh., and Yeganeh H., "Synthesis and properties of novel optically active polyimides", J. Polym. Sci., Part A: Polym. Chem., 39, 514-518 (2001).
98. Grubisic Z., Rempp P., and Benoit H., "A universal calibration for gel permeation chromatography", J. Polym. Sci, B5, 753 (1967).
99. Navarre M., "Polyimides thermal analysis", in Polyimides-Synthesis, Characterisation and Applications, 2, Plenum Press, New York, 429 (1984).
100. Chapin J.T., Onder B.K., and Farrissey W.J., "Synthesis of polyamides, polyamide-imides and polyimides from 4,4-methylene bis(isocyanato benzene)", Am. Chem. Soc., Poly. Prep. 21, 21(2),130-131 (1980).
101. Hay J.N., By Fawcett A.H. Ed., "Polyimides: Their synthesis, characterization, properties, and uses", in: High Value Polymers, The Royal Society of Chemistry (1991).
102. Miyamoto T., Kimura M., Eguchi K., and Matsuki Y., "Polyimide block copolymer and liquid crystal alignment layer forming agent", U.S. Pat. 5, 773, 559 (1998).
103. Carlsen D.B., Andrus R.G., and Hall R.T., "Dialysate filter including an asymmetric microporous, hollow fiber membrane incorporation a polyimide", U.S. Pat. Re 36, 914 (2000).
104. White L.S., "Polyimide membranes for hyperfiltration recovery of aromatic solvents", U.S. Pat. 6,180,008 (2001).
105. Goto H., Yamada T., and Ito N., "Polyimide-based composite, electronic parts using the composite, and polyimide-based aqueous dispersion", U.S. Pat. 6,214,923 (2001).