Fusion of hard and soft computing techniques in indirect, online tool wear monitoring

IEEE Transactions on Systems, Man and Cybernetics Part C: Applications and Reviews

Volumn 32, Issue 2, 2002, Pages 80-91

  Sick, Bernhard ^a,b  

^a Micro Hybrid Electronic   (Germany)

^b UNIVERSITY OF PASSAU   (Germany)

Author keywords

Fusion of hard and soft computing techniques; Process model; Time delay neural network; Tool wear monitoring; Turning

Indexed keywords

COMPUTATIONAL GEOMETRY; ENGINEERING RESEARCH; METAL CUTTING; MONITORING; NEURAL NETWORKS; ONLINE SYSTEMS; PROCESS ENGINEERING; SENSOR DATA FUSION;

HARD COMPUTING; INDIRECT TOOL WEAR MONITORING; METAL CUTTING MACHINING; ONLINE TOOL WEAR MONITORING; SOFT COMPUTING; TIME DELAY NEURAL NETWORK;

COMPUTER APPLICATIONS;

EID: 0036588824     PISSN: 10946977     EISSN: None     Source Type: Journal    
DOI: 10.1109/TSMCC.2002.801347     Document Type: Article

References (65)

1. B. Sick, "On-line and indirect tool wear monitoring in turning with artificial neural networks: A review of more than a decade of research," Mech. Syst. Signal Process., 2002, to be published.
2. R. G. Silva, R. L. Reuben, K. J. Baker, and S. J. Wilcox, "Tool wear monitoring of turning operations by neural network and expert system classification of a feature set generated from multiple sensors," Mech. Syst. Signal Process., vol. 12, no. 2, pp. 319-332, 1998.
3. W. Maydl and B. Sick, "Recurrent and non-recurrent dynamic network paradigms: A case study," in Int. Joint Conf. Neural Networks (IJCNN 2000), vol. 6, Como, Italy, 2000, pp. 73-78.
4. S. Pittner, S. V. Kamarthi, and Q. Gao, "Wavelet networks for sensor signal classification in flank wear assessment," J. Intell. Manufact., vol. 9, pp. 315-322, Aug. 1998.
5. G. Boothroyd and W. A. Knight, Fundamentals of Machining and Machine Tools, 2nd ed. New York/Basel, Switzerland: Marcel Dekker, 1989.
6. M. C. Shaw, Metal Cutting Principles. Oxford, U.K.: Clarendon, 1984.
7. E. Paucksch, Zerspantechnik, 9th ed. Braunschweig/Wiesbaden, Germany: Friedrich Vieweg & Sohn Verlagsgesellschaft, 1992.
8. ISO (International Organization for Standardization), Ed., Tool-Life Testing With Single-Point Turning Tools (ISO 3685), 2nd ed., 1993, ISO 3685: 1993(E).
9. S. Rangwala and D. Dornfeld, "A study of acoustic emission generated during orthogonal metal cutting-1: Energy analysis," Int. J. Mech. Sci., vol. 33, no. 6, pp. 471-487, 1991.
10. ____, "A study of acoustic emission generated during orthogonal metal cutting-2: Spectral analysis," Int. J. Mech. Sci., vol. 33, no. 6, pp. 489-499, 1991.
11. B. Sick, "Chances and risks of sensor fusion with neural networks: An application example," in Proceedings of the 8th International Conference on Artificial Neural Networks (ICANN '98), L. Niklasson, M. Bodén, and T. Ziemke, Eds. London, U.K.: Springer-Verlag, 1998, vol. 2, pp. 713-718.
12. S. Pittner, S. V. Kamarthi, and Q. Gao, "Wavelet networks for sensor signal interpretation in flank wear assessment," in Proc. Second World Congr. Intelligent Manufacturing Processes and Systems, Budapest, Hungary, 1997, pp. 82-87.
13. B. Sick, W. Grass and K. Donner, "Techniken der Sensorfusion bei der Verarbeitung mikrosystembasierter Signale," it+ti: Inform. Tech. Inform., vol. 41, no. 4, pp. 14-19, 1999.
14. R. R. Brooks and S. S. Iyengar, Multi-Sensor Fusion-Fundamentals and Applications With Software. Upper Saddle River, NJ: Prentice-Hall PRT, 1998.
15. Y. M. Niu, Y. S. Wong, and G. S. Hong, "An intelligent sensor system approach for reliable tool flank wear recognition," Int. J. Adv. Manufact. Technol., vol. 14, no. 2, pp. 77-84, 1998.
16. G. Warnecke and R. Kluge, "Control of tolerances in turning by predictive control with neural networks," J. Intell. Manufact., vol. 9, pp. 281-287, Aug. 1998.
17. E. Kannatey-Asibu, "A transport-diffusion equation in metal cutting and its application to analysis of the rate of flank wear," J. Eng. Ind., Trans. ASME, vol. 107, pp. 81-89, Feb. 1985.
18. B. M. Kramer and N. P. Suh, "Tool wear by solution: A quantitative understanding," J. Eng. Ind., Trans. ASME, vol. 102, pp. 303-309, Nov. 1980.
19. Y. Koren, "Flank wear model of cutting tools using control theory," J. Eng. Ind., Trans. ASME, vol. 100, pp. 103-109, Feb. 1978.
20. E. Usui, T. Shirakashi, and T. Kitagawa, "Analytical prediction of three dimensional cutting process," J. Eng. Ind., Trans. ASME, vol. 100, pp. 236-243, May 1978.
21. Z. Palmai, "A new, physically defined function to describe the wear of cutting tools," Wear, vol. 27, pp. 251-258, 1974.
22. A. Bhattacharyya and I. Ham, "Analysis of tool wear-Part I: Theoretical models of flank wear," J. Eng. Ind., Trans. ASME, vol. 91, pp. 790-798, Aug. 1969.
23. Y. Koren and A. G. Ulsoy, "State model for flank wear in metal cutting," in Proc. North Amer. Manufacturing Research Conf., Houghton, MI: (SME Manufact. Eng. Trans.), 1984, pp. 260-264.
24. Y. Koren and E. Lenz, "Mathematical model for the flank wear while turning steel with carbide tools," in Proc. CIRP Seminars on Manufacturing Systems, vol. 1, no. 2, 1972.
25. D. Barschdorff, U. Wahner, G. Wöstenkühler, G. Warnecke, and M. Müller, "Mustererkennungsverfahren zur prozeßbegleitenden Verschleißüberwachung beim Drehen," in Meßsignalverarbeitung und Diagnosemittel zur Prozeß- und Qualitätssicherung. Langen, Germany, 1995, pp. 115-124.
26. Y. Koren, A. G. Ulsoy, and K. Danai, "Tool wear and breakage detection using a process model," Ann. CIRP, vol. 35, no. 1, pp. 283-288, 1986.
27. K. Danai and A. G. Ulsoy, "A dynamic state model for on-line tool wear estimation in turning," J. Eng. Ind., Trans. ASME, vol. 109, pp. 396-399, Nov. 1987.
28. B. M. Kramer, "A comprehensive tool wear model," Ann. CIRP, vol. 35, no. 1, pp. 67-70, 1986.
29. N. H. Abu-Zahra and G. Yu, "Analytical model for tool wear monitoring in turning operations using ultrasound waves," Int. J. Mach. Tools Manufact., vol. 40, no. 11, pp. 1619-1635, 2000.
30. S. V. Kamarthi, "On-line tool wear estimation in turning through sensor data fusion and neural networks," Ph.D. dissertation, Pennsylvania State Univ., University Park, 1994.
31. S. Elanayar and Y. C. Shin, "Robust tool wear estimation via radial basis function neural networks," in Neural Networks in Manufacturing and Robotics. New York: ASME, 1992, vol. PED-57, pp. 37-51.
32. R. G. Silva, "Cutting tool condition monitoring of the turning process using artificial intelligence," Ph.D. dissertation, Univ. Glamorgan, U.K., 1997.
33. S. T. S. Bukkapatnam, S. R. T. Kumara, and A. Lakhtakia, "Fractal estimation of flank wear in turning," J. Dynam. Syst., Meas. Contr., Trans. ASME, vol. 122, pp. 89-94, Mar. 2000.
34. ____, "Fractal estimation of flank wear in turning using time-delay neural networks," in Intelligent Engineering Systems Through Artificial Neural Networks, C. H. Dagli, B. Fernández, J. Ghosh, and R. T. S. Kumara, Eds. New York: ASME, 1994, vol. 4, pp. 975-980.
35. L. I. Burke and S. Rangwala, "Tool condition monitoring in metal cutting: A neural network approach," J. Intell. Manufact., vol. 2, pp. 269-280, Oct. 1991.
36. D. E. Dimla, P. M. Lister, and N. J. Leighton, "Automatic tool state identification in a metal turning operation using MLP neural networks and multivariate process parameters," Int. J. Mach. Tools Manufact., vol. 38, no. 4, pp. 343-352, 1998.
37. D. A. Dornfeld, "Neural network sensor fusion for tool condition monitoring," Ann. CIRP, vol. 39, no. 1, pp. 101-105, 1990.
38. A. Ghasempoor, T. N. Moore, and J. Jeswiet, "Tool wear prediction in turning," in Proc. 13th Int. Congr. Exh. Condition Monitoring and Diagnostic Engineering Management (COMADEM 2000), Houston, TX, 2000, pp. 399-406.
39. R. J. Kuo and P. H. Cohen, "Multi-sensor integration for on-line tool wear estimation through radial basis function networks and fuzzy neural network," Neural Networks, vol. 12, no. 3, pp. 355-370, 1999.
40. C. S. Leem, D. A. Dornfeld, and S. E. Dreyfus, "A customized neural network for sensor fusion in on-line monitoring of cutting tool wear," J. Eng. Ind., Trans. ASME, vol. 117, pp. 152-159, May 1995.
41. M. Rahman, Q. Zhou, and G. S. Hong, "Application of Kohonen neural network for tool condition monitoring," Proc. SPIE, vol. 2620, pp. 422-428, 1995.
42. B. Sick, "Wear estimation for turning tools with process-specific pre-processing for time-delay neural networks," in Intelligent Engineering Systems Through Artificial Neural Networks, C. H. Dagli, M. Akay, O. Ersoy, B. R. Fernández, and A. Smith, Eds. New York: ASME, 1997, vol. 7, pp. 791-796.
43. B. Sick, A. Sicheneder, and H.-J. Lindinger, "A comparative evaluation of different neural network paradigms for tool wear classification in turning," in 3rd Int. Workshop Neural Networks in Applications (NN '98), D. Nauck, G. Krell, R. Kruse, and B. Mitchaelis, Eds., Magdeburg, Germany, 1998, pp. 139-146.
44. A. Ghasempoor, J. Jeswiet, and T. N. Moore, "Real time implementation of on-line tool condition monitoring in turning," Int. J. Mach. Tools Manufact., vol. 39, no. 12, pp. 1883-1902, 1999.
45. A. Ghasempoor, T. N. Moore, and J. Jeswiet, "On-line wear estimation using neural networks," Proc. Inst. Mech. Eng. B, vol. 212, no. 2, pp. 105-112, 1998.
46. W. Adam, I. Suwalski, and J. Krüger, "Werkzeugüberwachung für CNC-Drehmaschinen mit Fuzzy-Logik," Fraunhofer Institut für Produktion-sanlagen und Konstruktionstechnik (IPK), Berlin, Final Rep. DFG Research Project, Feb. 1996.
47. S. V. Kamarthi and S. R. T. Kumara, "A new neural network architecture for continuous estimation of flank wear in turning," in Proc. First World Congr. Intelligent Manufacturing Processes and Systems, vol. 2, Puerto Rico, 1995, pp. 1145-1156.
48. S. Elanayar and Y. C. Shin, "Robust tool wear estimation with radial basis function neural networks," J. Dynam. Syst., Meas. Contr., Trans. ASME, vol. 117, pp. 459-467, Dec. 1995.
49. S. V. T. Elanayar and Y. C. Shin, "Design and implementation of tool wear monitoring with radial basis function neural networks," in Proc. Amer. Control Conf. '95, Seattle, WA, 1995, pp. 1722-1726.
50. S. Elanayar and Y. C. Shin, "Modeling of tool forces for worn tools: Flank wear effects," J. Manufact. Sci. Eng., Trans. ASME, vol. 118, pp. 359-366, Aug. 1996.
51. S. V. T. Elanayar and Y. C. Shin, "Radial basis function neural network for approximation and estimation of nonlinear stochastic dynamic systems," IEEE Trans. Neural Networks, vol. 5, pp. 594-603, July 1994.
52. S. Elanayar and Y. C. Shin, "Tool wear estimation in turning operations based on radial basis functions," in Intelligent Engineering Systems Through Artificial Neural Networks, C. H. Dagli, S. R. T. Kumara, and Y. C. Shin, Eds. New York: ASME, 1991, pp. 685-692.
53. R. Kluge, "Prädiktive modellbasierte Regelung von Zerspanprozessen," Ph.D. dissertation, Univ. Kaiserslautern, Germany, 1999.
54. G. Chryssolouris, M. Domroese, and P. Beaulieu, "Sensor synthesis for control of manufacturing processes," J. Eng. Ind., Trans. ASME, vol. 114, pp. 158-174, May 1992.
55. G. Chryssolouris and M. Domroese, "Sensor integration for tool wear estimation in machining," in Sensors and Controls for Manufactoring. New York: ASME, 1988, vol. PED-33, pp. 115-123.
56. R. G. Silva, K. J. Baker, S. J. Wilcox, and R. L. Reuben, "The adaptability of a tool wear monitoring system under changing cutting conditions," Mech. Syst. Signal Process., vol. 14, no. 2, pp. 287-298, 2000.
57. B. Sick, "On-line tool wear classification in turning with time-delay neural networks and process-specific pre-processing," in Int. Joint Conf. Neural Networks (IJCNN '98), Anchorage, AK, 1998, pp. 84-89.
58. ____, "On-line tool wear monitoring in turning using neural networks," Neural Comput. Applicat., vol. 7, no. 4, pp. 356-366, 1998.
59. ____, Signalinterpretation mit Neuronalen Netzen unter Nutzung von modellbasiertem Nebenwissen am Beispiel der Verschleißüberwachung von Werkzeugen in CNC-Drehmaschinen. Düsseldorf, Germany: VDI-Verlag, 2000, Fortschritt-Berichte VDI (Reihe 10: Informatik/Kommunikationstechnik) Nr. 629.
60. E. A. Wan, "Finite impulse response neural networks with applications in time series prediction," Ph.D. dissertation, Stanford Univ., Stanford, CA, 1993.
61. M. Riedmiller, "RPROP-Description and implementation details," Univ. Karlsruhe, Tech. Rep., 1994.
62. R. Rojas, Neural Networks-A Systematic Introduction. Berlin/Heidelberg/New York: Springer-Verlag, 1996.
63. A. Waibel, T. Hanazawa, G. Hinton, K. Shikano, and K. J. Lang, "Phoneme recognition using time-delay neural networks," IEEE Trans. Acoust., Speech, Signal Process., vol. 37, 328-339, Mar. 1989.
64. S. Haykin, Neural Networks-A Comprehensive Foundation. New York: Macmillan, 1994.
65. M. Agarwal, "Combining neural and conventional paradigms for modelling, prediction and control," Int. J. Syst. Sci., vol. 28, no. 1, pp. 65-81, 1997.