Effects of high rates of loading on the deformation behavior and failure mechanisms of hexagonal close-packed metals and alloys

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 33, Issue 13, 2002, Pages 927-935

  Ramesh, K T ^a  

^a Johns Hopkins University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADIABATIC SHEAR LOCALIZATION; BCC METALS; DEFORMATION BEHAVIOR; DYNAMIC FAILURES; FAILURE MECHANISM; FLOW STRESS; HCP METALS; HEXAGONAL CLOSE-PACKED; HIGH RATE; HIGH STRAIN RATES; HIGH-STRAIN-RATE; METALS AND ALLOYS; POTENTIAL MECHANISM; TI-6AL-4V;

CERIUM ALLOYS; DEFORMATION; FAILURE ANALYSIS; HAFNIUM; METALLURGY; METALS; TITANIUM;

STRAIN RATE;

EID: 0036494366     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-002-1025-1     Document Type: Article

References (112)

1. Y.V.R.K. Prasad and R.W. Armstrong: Phil. Mag., 1974, vol. 29, pp. 1421-25.
2. B.J. Koeppel and G. Subhash: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 1999, vol. 30 (10), pp. 2641-48.
3. J.R. Asay, L.C. Chhabildas, and J.L. Wise: in Shock Waves in Condensed Matter - 9811, W.J. Nellis, L. Seaman, and R.A. Graham, ed., American Institute of Physics, New York, NY, 1982, pp. 427-31.
4. M.D. Bjorkman and J.E. Shrader: in Shock Waves in Condensed Matter - 9811, W.J. Nellis, L. Seaman, and R.A. Graham, eds., American Institute of Physics, New York, NY, 1982, pp. 432-36.
5. W.C. Moss: J. Appl. Phys., 1985, vol. 57, pp. 1665-70.
6. D.J. Steinberg and R.W. Sharp, Jr.: J. Appl. Phys., 1981, vol. 52, pp. 5072-83.
7. W.R. Blumenthal, R.W. Carpenter, C.P. Trujillo, S.P. Abeln, and G.T. Gray III: APS Shock Physics, 1997.
8. D. Montoya, G. Naulin, and J.P. Ansart: J. Phys. IV, 1991, vol. 1 (C3), pp. 27-34.
9. A.E. Abey and H.D. Stromberg: Trans. ASME: J. Basic Eng., 1971, vol. 93, pp. 1291-95.
10. T. Nicholas: Air Force Materials Laboratory, Dayton, OH: personal communication, 2001.
11. G. Subhash: JOM-J. Miner. Met. Mater. Soc., 1995, vol. 47 (5), pp. 55-58.
12. M.A. Meyers: Dynamic Behavior of Materials, Wiley Interscience, New York, NY, 1994.
13. K.T. Ramesh and S. Narasimhan: Int. J. Solids Struct., 1996, vol. 33 (25), pp. 3723-38.
14. D. Jia and K.T. Ramesh: unpublished research, 2001.
15. S. Yadav: Master's Thesis, The Johns Hopkins University, Baltimore, MD, 1994.
16. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: Acta Mater., 1998, vol. 46 (3), pp. 1025-43.
17. E.A. Anderson, D.C. Jillson, and S.R. Dunbar: J. Met., 1953, p. 1191.
18. F.D. Rosi, C.A. Dube, and B.H. Alexander: J. Met., 1953, p. 257.
19. F.D. Rosi: J. Met., 1954, p. 58.
20. F.D. Rosi, F.C. Perkins, and L.L. Siegle: Trans. AIME, 1956, p. 115.
21. U.F. Kocks and D.G. Westlake: Trans. TMS-AIME, 1967, vol. 239, pp. 1967-1107.
22. P.G. Partridge: Metall. Rev., 1967, p. 169.
23. D.G. Westlake: Trans. TMS-AIME, 1967, vol. 239, p. 1101.
24. A.G. Crocker and M. Bevis: in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, London, 1968.
25. H. Conrad and R. Jones, in The Science, Technologyand Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, London, 1968.
26. K. Okazaki and H. Conrad: Acta Metall., 1973, vol. 21, pp. 1117-29.
27. V. Ramachandran, A.T. Santhanam, and R.E. Reed-Hill: Ind. J. Tech-nol., 1973, vol. 11, pp. 485-92.
28. T.S. DeSisto: in High Speed Testing I, A.G.H. Dietz and F.R. Eirich, eds., Interscience, New York, NY, 1960, pp. 97-106.
29. H. Conrad: Acta Metall., 1966, vol. 14, p. 1631.
30. R.N. Orava, G. Stone, and H. Conrad: Trans. Am. Soc. Met., 1966, vol. 59, pp. 171-84.
31. A.T. Santhanam, V. Ramachandran, and R.E. Reed-Hill: Metall. Trans., 1970, vol. 1, pp. 2593-98.
32. T. Tanaka and H. Conrad: Acta Metall., 1972, vol. 20, p. 1019.
33. S.P. Agrawal, G.A. Sargent, and H. Conrad: Metall. Trans. A, 1973, vol. 4, p. 2613.
34. B. de Meester, M. Doner, and H. Conrad: Z. Metallkd., 1973, p. 775.
35. K. Okazaki, T. Odawara, and H. Conrad: Scripta Metall., 1977, vol. 11, p. 437.
36. J.C.C. Hsu and R.J. Clifton: J. Mech. Phys. Solids, 1974, vol. 22, pp. 233-53.
37. J.C.C. Hsu and R.J. Clifton: J. Mech. Phys. Solids, 1974, vol. 22, pp. 255-66.
38. A. Gilat and R.J. Clifton: J. Mech. Phys. Solids, 1985, vol. 33 (3), pp. 263-84.
39. D.W. Nicholson: in Shock Waves in Condensed Matter - 9883, J.R. Asay, R.A. Graham, and G.K. Straub, eds., North-Holland, Amsterdam, 1984, pp. 141-44.
40. G.I. Kanel, S.V. Razorenov, and V.E. Fortov: Sov. Phys. Tech. Phys., 1986, vol. 31, pp. 354-55.
41. J.S. Gyanchandani, S.C. Gupta, S.K. Sikka, and R. Chidambaram: in Shock Compression of Condensed Matter - 9889, S.C. Schmidt, J.N. Johnson, and L.W. Davison, eds., Elsevier, Amsterdam, 1990, pp. 131-34.
42. J. Harding: Arch. Mech., 1975, vol. 27, pp. 715-32.
43. G.L. Wulf: J. Mech. Sci., 1979, vol. 21, pp. 713-18.
44. S. Leclercq, C. Nguy, and P. Bensussan: International Conference on Mechanical Properties of Materials at High Rates of Strain, Institute of Physics Conf. Ser. No. 102, Oxford, United Kingdom, 1989.
45. K. Mimura and Y. Tomita: J. Phys. IV, 1991, vol. C3, pp. 813-20.
46. S. Gabelotaud, C. Nguy, P. Bensussan, M. Berveiller, and P. Lipinski: in Shock-Wave and High-Strain-Rate Phenomena in Materials, M.A. Meyers, L.E. Murr, and K.P. Staudhammer, eds., Marcel Dekker, New York, NY, 1992, pp. 161-70.
47. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Mater. Trans. A, 1993, vol. 24, pp. 2513-20.
48. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: The Johannes Weertman Symp., R.J. Arsenault et al., eds., TMS, Warrendale, PA, 1996, pp. 437-48.
49. D.J. Smith and R.L. Jones: Mech. Mater., 1989, vol. 8, pp. 219-35.
50. M.A. Meyers, G. Subhash, B.K. Kad, and L. Prasad: Mech. Mater., 1994, vol. 17, pp. 175-93.
51. Y. Yang, X.-M. Zhang, Z.-H. Li, and Q.-Y. Li: Scripta Metall. Mater., 1995, vol. 33, pp. 219-24.
52. S. Yadav and K.T. Ramesh: Mater. Sci. & Eng. A, 1998, vol. 246, pp. 265-81.
53. G. Subhash, G. Ravichandran, and B.J. Pletka: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1479-87.
54. R. Hill: The Mathematical Theoryof Plasticity, Oxford Science Publications, London, 1989.
55. R.J. Clifton: Trans. ASME: J. Appl. Mech., 1983, vol. 50, pp. 941-52.
56. G.C. Kaschner and G.T. Gray III: Metall. Mater. Trans. A-Phys. Metall. Mater. Sci., 2000, vol. 31A (8), pp. 1997-2003.
57. U.F. Kocks, C.N. Tome, and H.R. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1988.
58. C.N. Tome, P.J. Maudlin, R.A. Lebensohn, and G.C. Kaschner: Acta Mater., 2001, vol. 49, pp. 3085-96.
59. H. Conrad, M. Doner, and B. de Meester: in Titanium Science & Technology, R.I. Jaffee and H.M. Burte, eds., Plenum Press, New York, NY, 1973, pp. 969-1005.
60. S. Naka, A. Lasalmonie, P. Costa, and L.P. Kubin: Phil. Mag. A, 1988, vol. 57, pp. 717.
61. S. Naka, L.P. Kubin, and C. Perrier: Phil. Mag. A, 1991, vol. 63 (5), pp. 1035-43.
62. D. Lee: Metall. Trans., 1970, vol. 1 (6), p. 1607.
63. S.G. Song and G.T. Gray III: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2665-75.
64. L.P. Koshmanov, V.D. Rudnev, O.A. Nechaeva, and N.B. Sokolov: Atom. Energy, 1996, vol. 81 (2), pp. 601-04.
65. G.E. Das and T.E. Mitchell: Metall. Trans., 1973, vol. 4, pp. 1405-13.
66. A.M. Lennon and K.T. Ramesh: Int. J. Plasticity, 1998, vol. 14 (12) pp. 1279-92.
67. A.M. Lennon and K.T. Ramesh: Int. J. Plasticity, 2001, in press.
68. A.M. Lennon: Ph.D. Dissertation, The Johns Hopkins University, Baltimore, MD, 1998.
69. Y.L. Bai and B. Dodd: Adiabatic Shear Localization: Occurrence, Theories and Applications, Pergamon, Oxford, United Kingdom, 1992.
70. M.H. Yoo: Metall. Trans. A, 1981, vol. 12A, p. 409.
71. M.H. Yoo and J.K. Lee: Phil. Mag. A, 1991, vol. 63 (5), p. 987.
72. S.G. Song and G.T. Gray III: Acta Metall. Mater., 1995, vol. 43, p. 2325.
73. S.G. Song and G.T. Gray III: Acta Metall. Mater., 1995, 43 (6), pp. 2339-50.
74. M.H. Yoo, J.R. Morris, K.M. Ho, and S.R. Agnew: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 813-22.
75. L.C. Chhabildas, L.M. Barker, J.R. Asay, and T.G. Trucano: in Shock Compression of Condensed Matter - 1989, S.C. Schmidt, J.N. Johnson, and L.W. Davidson, eds., Elsevier, Amsterdam, 1990, pp. 429-32.
76. A. Marchand and J. Duffy: J. Mech. Phys. Solids, 1988, vol. 36 (3), pp. 251-83.
77. M. Zhou, G. Ravichandran, and A.J. Rosakis: J. Mech. Phys. Solids, 1996, vol. 44, pp. 981-1006.
78. L.W. Meyer and S. Manwaring: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel-Dekker, New York, NY, 1986, pp. 657-74.
79. V.F. Nesterenko, M.A. Meyers, and T.W. Wright: in Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Elsevier, Amsterdam, 1995, pp. 397-404.
80. D.R. Chichili and K.T. Ramesh: J. Appl. Mech., 1999, vol. 66, pp. 10-20.
81. R.E. Winter: Phil. Mag., 1975, vol. 31, pp. 765-73.
82. H.A. Grebe, H.-R. Pak, and M.A. Meyers: Metall. Trans. A, 1985, vol. 16A, pp. 761-75.
83. M.A. Mogilevskii, T.O. Sanchaa, and Y.D. Shishkin: J. Appl. Mech. Tech. Phys., 1986, vol. 27, pp. 430-32.
84. H.-R. Pak, C.L. Wittman, and M.A. Meyers: in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel-Dekker, New York, NY, 1986, pp. 749-60.
85. K.P. Staudhammer and A.J. Gray: Inst. Phys. Conf. Ser., 1989, vol. 102, pp. 111-18.
86. W.H. Holt, W. Mock, W.G. Soper, C.S. Coffey, V. Ramachandran, and R.W. Armstrong: in Shock Waves in Condensed Matter - 1989, S.C. Schmidt, J.N. Johnson, and L.W. Davidson, eds., Elsevier, Amsterdam, 1990, pp. 915-18.
87. V.K. Satish, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Trans. A, 1993, vol. 24A, p. 2513.
88. J.Y. Sheikh-Ahmad and J.A. Bailey: Trans. ASME: J. Eng. Mater. Technol., 1995, vol. 117, pp. 255-59.
89. Y. Yang, Z. Xinming, L. Zhenghua and L. Qingyun: Acta Mater., 1996, vol. 44, pp. 561-65.
90. D.R. Chichili: Ph.D. Dissertation, The Johns Hopkins University, Baltimore, MD, 1997.
91. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: unpublished research, 2001.
92. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: unpublished research, 2001.
93. K.T. Ramesh, S. Yaday, and J.A. Davis: in Tungsten and Tungsten Alloys 1882, A. Bose and R.J. Dowding, Metal Powder Industries Federation, Princeton, NJ, 1993, pp. 299-306.
94. M. da Silva and K.T. Ramesh: Mater. Sci. Eng. A, 1997, vol. 232, pp. 11-22.
95. A.U. Sulijoadikusumo and O.W. Dillon, Jr.: in Metallurgical Effects at High Strain Rates, R.W. Rohde et al., eds., Plenum, New York, NY, 1973, pp. 501-18.
96. Y. Me-Bar and D. Shechtman: Mater. Sci. Eng., 1983, vol. 58, pp. 181-88.
97. S.P. Timothy: Ph.D. Dissertation, Cambridge University, Cambridge, NY, 1983.
98. S.P. Timothy and I.M. Hutchings: Inst. Phys. Conf. Ser., 1984, vol. 70, pp. 397-404.
99. S.P. Timothy and I.M. Hutchings: Proc. 9th Int. Conf. on High Energy Rate Fabrication, ASME, New York, NY, 1984, pp. 31-40.
100. R.L. Woodward, B.J. Baxter, and N.V.Y. Scarlett: Inst. Phys. Conf. Ser, 1984, vol. 70, pp. 525-32.
101. L.W. Meyer and C.Y. Chiem: in Titanium Science & Technology,G. Lutjering, U. Zwicker, and W. Bunk, eds., Deutsche Gessellschaft fur Metallkunde, 1985, p. 1907.
102. S.P. Timothy and I.M. Hutchings: Acta Metall., 1985, vol. 33, No. 4, pp. 667-76.
103. S.P. Timothy and I.M. Hutchings: Mater. Sci. Technol., 1985, vol. 1, pp. 526-30.
104. S.P. Timothy and I.M. Hutchings: J. Mater. Sci. Lett., 1986, vol. 5, pp. 453-54.
105. L.L. Wang, W.X. Lu, S.S. Hu and Z.P. Tang: in Macro- and Micro-Mechanics of High Velocity Deformation and Fracture, K. Kawata and J. Shiori, eds., Springer-Verlag, Berlin, 1987, pp. 395-406.
106. V. Ramachandran, X.J. Zhang, R.W. Armstrong, W.H. Holt, W. Mock, W.G. Soper, and C.S. Coffey: in Microstructure/Property Relationships in Titanium Alloys and Titanium Aluminides, Y.-W. Kim and R.R. Boyer, eds., TMS, Warrendale, PA, 1991, pp. 647-64.
107. W.H. Holt, W. Mock, W.G. Soper, C.S. Coffey, V. Ramachandran, and R.W. Armstrong: in Shock-Wave and High-Strain-Rate Phenomena in Materials, M.A. Meyers, L.E. Murr, and K.P. Staudhammer, eds., Marcel-Dekker, New York, NY, 1992, pp. 629-36.
108. Y.L. Bai, Q. Xue, Y.B. Xu, and L. Shen: Mech. Mater., 1994, vol. 17, pp. 155-64.
109. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2173-80.
110. D.C. Swift: in High Pressure Science and Technology 1883, S.C. Schmidt, J.W. Shaner, G.A. Samara, and M. Ross, eds., American Institute of Physics, New York, 1994, pp. 1005-08.
111. X.Y. Wu and K.T. Ramesh: Johns Hopkins, unpublished research, 2001.
112. D. Jia and K.T. Ramesh: Johns Hopkins, unpublished research, 2001.