Neoalkoxy titanate and zirconate coupling agent additives in thermoplastics

Polymers and Polymer Composites

Volumn 10, Issue 2, 2002, Pages 121-172

  Monte, Salvatore J ^a  

^a Kenrich Petrochemicals Inc   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITIVES; CATALYSIS; COMPOSITION EFFECTS; COPOLYMERIZATION; CROSSLINKING; HYDROPHOBICITY; LOW TEMPERATURE OPERATIONS; MOISTURE; ORGANIC POLYMERS; TITANIUM COMPOUNDS; VISCOSITY; ZIRCONIUM COMPOUNDS;

COUPLING AGENTS; NEOALKOXY TITANATE; PLASTICATION PHASE; REPOLYMERIZATION CATALYSIS; ZIRCONATE;

THERMOPLASTICS;

EID: 0036414678     PISSN: 09673911     EISSN: None     Source Type: Journal    
DOI: 10.1177/096739110201000202     Document Type: Article

References (54)

1. Monte, S.J., Kenrich Petrochemicals, Inc., "KenReact® Reference Manual - Titanate, Zirconate and Aluminate Coupling Agents", Third Revised Edition, March 1995, 340 pgs.
2. Monte, S.J. and Sugerman, G., Kenrich Petrochemicals, Inc.: S.M. Gabayson and W.E. Chitwood, General Dynamics, "Enhanced Bonding of Fiber Reinforcements to Thermoset Resins", 33rd International SAMPE Symposium, Anaheim, CA, March 7-10, 1988.
3. Monte, S.J. and Sugerman, G., "Heavy Metal Free High Solids Anticorrosive Baked Coatings", 33rd Int'l SAMPE Symp., Anaheim, CA, March 7-10, 1988 (SAMPE II).
4. Monte, S.J. and G. Sugerman, G., "High Temperature Inorganic Anti-corrosive Coatings Using Organometallic Titanate and Zirconate Quat Blends (QB)," Corrosion '90, Las Vegas, NV, April 23-27, 1990, Paper No. 432.
5. Monte, S.J. and Sugerman, G., "Corrosion Resistant One Hundred Percent Solids, Environmentally Sound Coatings", Water-Borne & Higher Solids Coatings Symposium, New Orleans, LA Feb. 3-5, 1988.
6. Monte,S.J. and Sugerman,G., "Alkoxy Titanates and Zirconates as Corrosion Inhibitors in Clear Coats and Unfilled Polymers", Corrosion/88, NACE, St. Louis, MO, March 21-25, 1988.
7. Monte, S. J. and Sugerman, G., "Very High Solids and Waterborne Anticorrosive Coatings", Western Coatings Societies' 19th Biennial Symposium and Show, Anaheim, CA. March 14-16, 1989.
8. Monte, S.J. and Sugerman, G., "The Usage of Organometallic Reagents as Catalysts and Adhesion Promoters in Reinforced Composites", Second International Conference on Composite Interfaces (ICCI-II), Case Western Reserve University, Cleveland, Ohio, June 13-17, 1988.
9. Monte, S.J. and Sugerman, G., KPI; A Damusis and P. Patel, Polymer Institute, University of Detroit, Application of Titanate Coupling Agent in Mineral and Glass Fiber Filled RIM Urethane Systems," SPI Urethane Division 26th Annual Technical Conference, November 1981.
10. Monte, S.J. and Sugerman, G., KPI, "Titanate Coupling Agents-1985 Urethane Applications", SPI Urethane Division 29th Annual Technical / Marketing Conference, October 1985.
11. Monte, S.J. "Injection Molding with Neoalkoxy Titanates and Zirconates', SPE RETEC, White Haven, PA, USA October 19, 1995.
12. Monte, S.J., "Titanium and Zirconium Esters vs. Couplers and Single Site Catalysts for In-Situ Repolymerization and Copolymerization Useful for Recycled Polymeric Compositions," ACS Rubber Div., Louisville, KY, Oct. 8-11, 1996, Paper No. 57.
13. Monte, S.J., "Better Bonding and Metallocene-like Catalysis Benefits for Elastomers", Rubber Technology International '96, UK & Int'l Press, a Div. of Auto Intermediates Ltd (1996).
14. Monte, S.J. "Compounding and Molding with Neoalkoxy Titanates and Zirconates", Polyblends '97 SPE Div./Sect. Conference, NRCC, Montreal, Canada, Oct. 9, 1997.
15. Monte, S.J., "Increased Productivity of Thermoplastics Using Organometallic Titanate and Zirconate Coupling Agents", SPE ANTEC, May 1-3, 1989.
16. Monte, S.J., "Coupling Agents Increase PVC Productivity", PlasticsCompoundingMagazine, November/December 1989.
17. Glaysher, W.A., Haff, D.R., Schlaubitz, H.H., and Monte, S. J., "The Use of Organometallic Coupling Agents as Process Aids in Blow Molded HDPE"' SSPE RETEC, High Performance Blow Molding Conference, Oct. 9-10. 1990.
18. Monte, S.J., "New Opportunities in Recycled Plastics With Neoalkoxy, Titanate and Zirconate Coupling Agents"' SPE Recycle RETEC, October 31, 1989.
19. Monte, S.J., "More Efficient Manufacture of Better Foamed, Filled and Unfilled Polymer Compounds With Titanate and Zirconate Coupling Agents", Northeast Regional Rubber & Plastics Exposition, September 21-22, 1994, Mahwah, NJ.
20. Monte, S.J., Sugerman, G. "The Use of Organometallic Titanates & Zirconates as Reactants and Compatabilizers in Polymers", Compalloy'90, Mar. 9, 1990, New Orleans, LA.
21. Plueddemann, Edwin P., "Silane Coupling Agents", Pg. 114, 1982 Plenum Press.
22. Voelkel, A. and Grzeskowiak, T., Poznan University of Technology, Institute of Chemical Technology and Engineering, "The Use of Solubility Parameters in Characterization of Titanate Modified Silica Gel by Inverse Gas Chromatography", Chromatographia Vol. 51, No. 9/10, May 2000.
23. Wang, Yeh and Huang, Jiang-Shen, Dept.ofChem. Eng'g, Tunghai University, "Single Screw Extrusion Compounding of Particulate Filled Thermoplastics: State of Dispersion and Its Influence on Impact Properties", Journal of Applied Polymer Science, Vol. 60, 1779-1791 (1996).
24. Krysztafkiewicz, A.; Rager, B.; Jesionowski, T., Institute of Technology and Chemical Engineering, Pozna? University of Technology, "The Effect of Surface Modification on Physiochemical Properties of Precipitated Silica", Journal of Materials Science 32 (1997) 1333-1339.
25. Kajiyama, Aklhisa; Nakamura, Tatsuya, Toda KogyoCorp., EP 1 041 041 A1 dated 04.10.2000, "Layered rock salt-type oxide particle powder and process for producing same".
26. 3 Filled PP/HDPE Composites Using Different Surface Modifiers".
27. Calvo, Luis M.; Noskin, Steve; Kahan Sansodeen; McWilliams, Matthew, Polymer Plastics Co., U.S. 6,036,998 dated Mar. 14, 2000, "Process For Coloring EPDM Rubber To Produce Granules For Blending With Polyurethane Resins Or To Use by Themselves To Create Safety And Athletic Surfaces".
28. Yu, G., Zhang, M.Q., Zeng, H.M., "Carbon-Black-Filled Polyolefine as a Positive Temperature Coefficient Material: Effect of Composition, Processing, and Filler Treatment", Journal of Applied Polymer Science, Vol. 70, 559-566 (1998).
29. Ogino, Masaaki, Bando Chemical Industries, Ltd., JP03070754 dated 19910326, "Rubber Compositions With High Heat-Conductivity".
30. 2 reinforced epoxy system", Mater. Lett. (1996), 26(6), 299-303 Coden:MLETDJ;ISSN:0167-577X.
31. 2 Particles Dispersible in Organic Solvents and Their Photocatalytic Properties", Journal of Chemical Engineering of Japan, Vol. 31, No.1, pp. 21-28, 1998.
32. Ahmad, Sahrim; Abdullah, Ibrahim; Abdullah, Mustfa; and Wai, Wong Chuan, Faculty of Applied and Physical Sciences, Universiti Kebangsaan Malaysia, "Electrical and Magnetic Properties of Barium Ferrite Thermoplastic Natural Rubber (TPNR) Composites", Sci. Int. (Lahore), 10(4), 375-377, 1998, ISSN 1023-5316; CODEN; INTE 8.
33. Mitsubishi Cable Ind., US 4,769,179 9/6/88.
34. Eichler, Hans-Jürgen; Palmer Michael; Herbiet, René, ALUSUISSE MARTINSWERK GMBH, WO 00015710 dated 14. September 1999, "Surface-Modified Filling Material Composition".
35. Kato, Masaharu; Omoto, Masanobu; Ishimatsu, Hirofumi; Madalle, James; Kratzer, Jeff A.; EP 0 708 143 A1 dated 24.04. 1996, "Polyvinyl Chloride Based Resin Composition and Products Derived Therefrom".
36. Field, R. and Cowe, P.L., "The Organic Chemistry of Titanium", Butterworth & Co., Washington, D.C., 1965 (213 pp. 791 references).
37. Korea Institute of Science and Technology, U.S. 5,237,042, Aug. 17, 1993.
38. Kim, C.Y., Cho, H.N., Yoo, H.W., Kim, H.J., Korea Institute of Science and Technology, "Method for the Preparation of Polyester by Use of Composite Catalyst", U.S. 5,714,570 dated Feb. 3, 1998.
39. Donald W. Kelley, U.S. Patent 4,837,272, June 6, 1989.
40. Monte, S.J., Sugarman, G., Kenrich Petrochemicals, Inc., "Repolymerization", U.S. Patent 4,657,988 dated April 14, 1987.
41. Wah, Chua Ai; Choong, Leong Yub; Neon Gan Seng, Petronas Research and Scientific Services, Dept. Chem. Eng'g., U. of Malaysia, European Polymer Journal 36 (2000) 789-801.
42. Galanti, Andrea; Laus, Michele; Fiorini, Maurizio, CS Mixer S.r.l., Ravenna, Italy, "Reinforcement of SBS by organophilic clay fillers", Kautsch. Gummi Kunstst. (1999), 52(1), 21-25, CODEN: KGUKAC; ISSN: 0022-9520, PB Huethig GmbH, cc 39-9 (Synthetic Elastomers and Natural Rubber).
43. Simonutti, F.M., Wilson Sporting Goods Co., Japan, "Golf ball cores containing titanate coupling agents", JP 10108925 dated 28 April 1998.
44. Kim, Hyun; Snell, Dean A., Taylor MAde Golf Company, Inc., WO 00/40306 dated 13 July 2000, "Improvement of Golf Ball Cover Using Organometallic Compounds".
45. Industrial Technology Res. Inst. Hsinchu, Taiwan,' US 5,340,861, Aug. 23, 1994.
46. Fukae, Kensuke and Yoshida, Ichiro, Advance Color Technology, Inc., U.S. 6,132,922 dated Oct. 17, 2000, "Liquid Developer for Electrophotographic Printing Apparatus".
47. Monte, S.J., Kenrich Petrochemicals, Inc., "Titanate and Zirconate Coupling Agents in Foamed Polymers", RAPRA Foams Conference, March 13, 2001, Frankfurt, Germany.
48. Schut, J. "Organometallic Esters Enhance Recycled PET/PC Blends," Plastics Formulating and Compounding, Sept./Oct., 1996.
49. Neste Oy, WO 95/23183, Feb. 28, 1995.
50. Miller, N. A.; Jones, M.S.,; and Stirling, C.D., Industrial Research Limited, "Waste Plastics/Cellulose Fibre Composites", Polymers & Polymer Composites, Vol.6, No. 2, 1998.
51. U.S. Patent 5,659,058 dated August 19, 1997, "Thermally Stable Antistatic Agents" - Monte, S.J.
52. S. J. Monte, "Permanent, Transparent, Non-Blooming and Non-Hygroscopic Antistatic Agents Based On Combined Neoalkoxy Organometallics", Addcon World 2001 Conference, 9 October 2001, Berlin, Germany.
53. Zhuo, Qizhuo; Skovran, Dennis C.; Lightner, Leo F.; Randall, Michael S.: Stygaer, Vernon E., Ferro Corporation, WO 00/42098 dated 20 July 2000, "Thermally Conductive Plastic".
54. Monte, S.J., Paper No. 16, "Applications of Titanate and Zirconate Coupling Agents in Thermoplastics and Thermoset Elastomers-2001", ACS Rubber Division, April 25, 2001.