Validated numerical modeling of the effects of combined orthodontic and orthognathic surgical treatment on TMJ loads and muscle forces

American Journal of Orthodontics and Dentofacial Orthopedics

Volumn 121, Issue 1, 2002, Pages 73-83

  Nickel, Jeffrey C ^a   Yao, Ping ^b   Spalding, Peter M ^a   Iwasaki, Laura R ^a  

^a UNIVERSITY OF NEBRASKA MEDICAL CENTER   (United States)

^b Department of Growth and Development ^*

Author keywords

[No Author keywords available]

Indexed keywords

ADOLESCENT; ADULT; ANATOMY; ARTICLE; BIOMECHANICS; CALCULATION; CLINICAL ARTICLE; COMPUTER MODEL; CONTROLLED STUDY; DENTAL SURGERY; ELECTROMYOGRAPHY; FEMALE; FUNCTIONAL ASSESSMENT; FUNCTIONAL MORPHOLOGY; HUMAN; JAW MOVEMENT; JOINT FUNCTION; MALE; MANDIBLE CONDYLE; MASTICATION; MOLAR TOOTH; MUSCLE CONTRACTION; MUSCLE FORCE; MUSCLE FUNCTION; MUSCLE STRENGTH; NEUROMUSCULAR FUNCTION; ORTHODONTICS; PREDICTION; SURGICAL TECHNIQUE; TEMPOROMANDIBULAR JOINT; TREATMENT OUTCOME; VALIDATION PROCESS; BIOLOGICAL MODEL; DENTAL CARE; MASTICATORY MUSCLE; ORAL SURGERY; PHYSIOLOGY; STATISTICAL MODEL; TEMPOROMANDIBULAR JOINT DISORDER; VALIDATION STUDY;

ADOLESCENT; ADULT; BIOMECHANICS; BITE FORCE; DENTAL STRESS ANALYSIS; FEMALE; HUMANS; LINEAR MODELS; MALE; MASTICATORY MUSCLES; MODELS, BIOLOGICAL; ORAL SURGICAL PROCEDURES; ORTHODONTICS, CORRECTIVE; TEMPOROMANDIBULAR JOINT; TEMPOROMANDIBULAR JOINT DISORDERS;

EID: 0036362503     PISSN: 08895406     EISSN: None     Source Type: Journal    
DOI: 10.1067/mod.2002.120138     Document Type: Article

References (50)

1. Nickel JC, McLachlan KR. An analysis of surface congruity in the growing human temporomandibular joint. Arch Oral Biol 1994;39:315-21.
2. Nickel JC, McLachlan KR. In vitro measurement of the frictional properties of the temporomandibular joint disc. Arch Oral Biol 1994;39:323-31.
3. Nickel JC, McLachlan KR. In vitro measurement of the stress-distribution properties of the pig temporomandibular joint disc. Arch Oral Biol 1994;39:439-48.
4. Youssef RE, Throckmorton GS, Ellis E III, Sinn DP. Comparison of habitual masticatory cycles and muscle activity before and after orthognathic surgery. J Oral Maxillofac Surg 1997;55:699-707.
5. Brehnan K, Boyd RL, Laskin J, Gibbs CH, Mahan P. Direct measurement of loads at the temporomandibular joint in Macaca arctoides. J Dent Res 1981;60:1820-4.
6. Boyd RL, Gibbs CH, Mahan PE, Richmond AF, Laskin JL. Temporomandibular joint forces measured at the condyle of Macaca arctoides. Am J Orthod Dentofacial Orthop 1990;97:472-9.
7. Hylander WL. An experimental analysis of temporomandibular joint reaction force in macaques. Am J Phys Anthropol 1979;51: 433-56.
8. Hylander WL, Bays R. An in vivo strain-gauge analysis of the squamosal-dentary joint reaction force during mastication and incisal biting in Macaca mulatta and Macaca fascicularis. Arch Oral Biol 1979;24:689-97.
9. Hohl TH, Tucek WH. Measurement of condylar loading forces by instrumented prosthesis in the baboon. J Maxillofac Surg 1982; 10:1-7.
10. Liu ZJ, Herring SW. Bone surface strains and internal bony pressures at the jaw joint of the miniature pig during masticatory muscle contraction. Arch Oral Biol 2000;45:95-112.
11. Herzog W, Binding P. Mathematically indeterminate systems. In: Nigg BM, Herzog W, editors. Biomechanics of the musculoskeletal system. Toronto: Wiley and Sons; 1994. p. 491-505.
12. An KN, Kwak BM, Chao EY, Morrey BF. Determination of muscle and joint forces: a new technique to solve the indeterminate problem. J Biomech Eng 1984;106:364-7.
13. Lu T-W, O'Connor JJ, Taylor SJG, Walker PS. Validation of a lower limb model with in vivo femoral forces telemetered from two subjects. J Biomech 1998;31:63-9.
14. Li G, Kaufman KR, Chao EYS, Rubash HE. Prediction of antagonistic muscle forces using inverse dynamic optimization during flexion/extension of the knee. J Biomech Eng 1999;121:316-22.
15. Niemi J, Nieminen H, Takala E-P, Viikari-Juntura E. A static shoulder model based on a time-dependent criterion for load sharing between synergistic muscles. J Biomech 1996;29:451-60.
16. Prilutsky BI, Isaka T, Albrecht AM, Gregor RJ. Is coordination of two-joint leg muscles during load lifting consistent with the strategy of minimum fatigue? J Biomech 1998;31:1025-34.
17. Hoek van Dijke GA, Snijders CJ, Stoeckart R, Stam HJ. A biomechanical model on muscle forces in the transfer of spinal load to the pelvis and legs. J Biomech 1999;32:927-33.
18. Curtis DA, Plesh O, Hannam AG, Sharma A, Curtis TA. Modeling of jaw biomechanics in the reconstructed mandibulectomy patient. J Prosthet Dent 1999;81:167-73.
19. Korioth TWP, Hannam AG. Effect of bilateral asymmetric tooth clenching on load distribution at the mandibular condyles. J Prosthet Dent 1990;64:62-73.
20. Korioth TWP. Simulated physics of the human mandible. In: McNeill C, editor. Science and practice of occlusion. Chicago: Quintessence; 1997. p. 179-86.
21. Throckmorton GS, Groshan GJ, Boyd SB. Muscle activity patterns and control of temporomandibular joint loads. J Prosthet Dent 1990;63:685-95.
22. Throckmorton GS, Throckmorton LS. Quantitative calculations of temporomandibular joint reaction forces. I. The importance of the magnitude of the jaw muscle forces. J Biomech 1985;18:445-52.
23. van Eijden TMGJ. Jaw muscle activity in relation to the direction and point of application of bite force. J Dent Res 1990;69:901-5.
24. Koolstra JH, van Eijden TM, Weijs WA, Naeije M. A three-dimensional mathematical model of the human masticatory system predicting maximum possible bite forces. J Biomech 1988;21:563-76.
25. van Eijden TM. Three-dimensional analyses of human bite-force magnitude and moment. Arch Oral Biol 1991;36:535-9.
26. Itoh K, Hayashi T, Miyakawa M. Controllability of temporomandibular joint loading by coordinative activities of masticatory muscles: a two-dimensional static analysis. Front Med Biol Eng 1997;8:123-38.
27. Osborn JW, Baragar FA. Predicted pattern of human muscle activity during clenching derived from a computer assisted model: symmetric vertical bite forces. J Biomech 1985;18:559-612.
28. Koolstra JH, van Eijden TMGJ. Biomechanical analysis of jaw-closing movements. J Dent Res 1995;74:1564-70.
29. Koolstra JH, van Eijden TMGJ. The jaw open-close movements predicted by biomechanical modeling. J Biomech 1997;30:943-50.
30. Koolstra JH, van Eijden TMGJ. Three-dimensional dynamical capabilities of the human masticatory muscles. J Biomech 1999; 32:145-52.
31. Smith DM, McLachlan KR, McCall WD Jr. A numerical model of temporomandibular joint loading. J Dent Res 1986;65:1046-52.
32. Trainor PGS, McLachlan KR, McCall WD Jr. Modeling of forces in the human masticatory system with optimization of the angulations of the joint loads. J Biomech 1995;28:829-43.
33. Trainor PGS, McLachlan KR. A numerical model to predict the force output of the jaw musculature. Eng Optimization 1992; 18:317-28.
34. Nickel JC, McLachlan KR, Smith DM. A theoretical model of loading and eminence development of the human temporomandibular joint. J Dent Res 1988;67:903-10.
35. Jackson P. An investigation to test numerical modeling predictions of TMJ eminence morphology in humans [thesis]. Winnipeg: The University of Manitoba; 1996.
36. Baird BW. Muscle activity associated with extraoral forces applied to the chin [thesis]. Lincoln: The University of Nebraska; 1999.
37. Walker RD. Tests of modeled muscle forces during biting in humans [thesis]. Lincoln: The University of Nebraska; 2000.
38. Kobayashi T, Honma K, Nakajima T, Hanada K. Masticatory function in patients with mandibular prognathism before and after orthognathic surgery. J Oral Maxillofac Surg 1993;51:997-1001.
39. Iwase M, Sugimori M, Kurachi Y, Nagumo M. Changes in bite force and occlusal contacts in patients treated for mandibular prognathism by orthognathic surgery. J Oral Maxillofac Surg 1998;56:850-5.
40. Proffit WR, Turvey TA, Field HW, Phillips C. The effect of orthognathic surgery on occlusal force. J Oral Maxillofac Surg 1989;47:457-63.
41. Proffit WR, Fields HW, Nixon WL. Occlusal forces in normal and long-face adults. J Dent Res 1983;62:566-70.
42. Kiliaridis S, Kjellberg H, Wenneberg B, Engstrom C. The relationship between maximal bite force, bite force endurance, and facial morphology during growth: a cross-sectional study. Acta Odontol Scand 1993;51:323-31.
43. Throckmorton GS, Buschang PH, Ellis E III. Improvement of maximum occlusal forces after orthognathic surgery. J Oral Maxillofac Surg 1996;54:1080-6.
44. Throckmorton GS, Buschang PH, Ellis E III. Morphologic and biomechanical determinants in the selection of orthognathic surgery procedures. J Oral Maxillofac Surg 1999;57:1044-57.
45. Throckmorton GS, Buschang PH, Ellis E III. Morphologic and biomechanical correlates with maximum bite forces in orthognathic surgery patients. J Oral Maxillofac Surg 1999;58:515-24.
46. Finn RA, Throckmorton GS, Bell WH, Legan HL. Biomechanical considerations in the surgical correction of mandibular deficiency. J Oral Surg 1980;38:257-64.
47. Mavreas D, Melsen B. Changes in the mechanical advantage of the masseter and temporal muscles following surgical correction of mandibular prognathism. Int J Adult Orthod Orthognath Surg 1997;12:215-25.
48. Iwasaki LR. A three-dimensional analysis of isometric biting in long and short facial types [thesis]. Winnipeg: The University of Manitoba; 1987.
49. Basmajian JV, De Luca CJ. Apparatus, detection, and recording techniques. In: Basmajian JV, De Luca CJ, editors. Muscles alive, their functions revealed by electromyography. 5th edition. Baltimore: Williams and Wilkins; 1985. p. 30-7.
50. Gallo EM, Nickel JC, Iwasaki ER, Palla S. Stress-field translation in the healthy human temporomandibular joint. J Dent Res 2000;79:1740-6.