SCOPUS 정보 검색 플랫폼

Fatigue and Fracture of Engineering Materials and Structures

Volumn 25, Issue 1, 2002, Pages 17-26

Determination of the opening load for a growing fatigue crack: Evaluation of experimental data reduction techniques and analytical models

(3) Blandford, R S a Daniewicz, S R a Skinner, J D a

a MISSISSIPPI STATE UNIVERSITY (United States)

Author keywords

Fatigue crack closure; Finite element analysis; Strip yield model

Indexed keywords

ALUMINUM ALLOYS; APPROXIMATION THEORY; CYCLIC LOADS; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; FRACTURE TOUGHNESS; STRESS INTENSITY FACTORS; SURFACE ROUGHNESS;

CRACK OPENING LOADS; DATA REDUCTION TECHNIQUES; FATIGUE CRACK CLOSURE; METALLIC MATERIALS; STRIP YIELD MODEL;

CRACK PROPAGATION;

EID: 0036165349 PISSN: 8756758X EISSN: None Source Type: Journal
DOI: 10.1046/j.1460-2695.2002.00439.x Document Type: Article

Times cited : (19)

References (18)

1
- 0003625438
- NASA TM 109032. NASA, Washington, DC
- (1993) Results of the Second Round Robin on Opening-Load Measurement Conducted by ASTM Task Group E24.04.04 on Crack Closure Measurement and Analysis
- Phillips, E.P.¹

2
- 0008233358
- eff estimation procedures on 6061-T6 and 2024-T3 aluminum alloys fatigue damage of structural materials II-Hyamnis, MA
- Elsevier Science, Oxford
- (1998)
- Donald, J.K.¹ Paris, P.C.²

3
- 84987582526
- Correlation of fatigue crack growth data obtained at different stress ratios
- ASTM STP 982, (Edited by J. C. Newman Jr and W. Elber). American Society of Testing and Materials, Philadelphia, PA
- (1988) Mechanics of Fatigue Crack Closure , pp. 516-527
- Booth, G.S.¹ Maddox, S.J.²

4
- 85121111871
- A comparison of measurement methods and numerical procedures for the experimental characterization of fatigue crack closure
- ASTM STP 982, (Edited by J. C. Newman Jr and W. Elber). American Society of Testing and Materials, Philadelphia, PA
- (1988) Mechanics of Fatigue Crack Closure , pp. 171-185
- Allison, J.E.¹ Ku, R.C.² Pompetzki, M.A.³

5
- 0003419006
- NASA TN D-8010. NASA, Washington, DC
- (1975) Crack-Closure and Crack-Growth Measurements in Surface-Flawed Titanium Alloy Ti-6Al-4V
- Elber, W.¹

6
- 85167446239
- A procedure for standardizing crack closure levels
- ASTM STP 982, (Edited by J. C. Newman Jr and W. Elber). American Society of Testing and Materials, Philadelphia, PA
- (1988) Mechanics of Fatigue Crack Closure , pp. 222-229
- Donald, J.K.¹

7
- 0032628822
- Smoothing and differentiating load-displacement data using a low-pass filter for improved crack opening load estimates
- (1999) Fatigue Fract. Engng Mater. Struct. , vol.22 , pp. 273-279
- Daniewicz, S.R.¹

8
- 0028369933
- An elastic-plastic analytical model for predicting fatigue crack growth in arbitrary edge-cracked two-dimensional geometries with residual stresses
- (1994) Int J. Fatigue , vol.16 , pp. 123-133
- Daniewicz, S.R.¹ Collins, J.A.² Houser, D.R.³

9
- 0008229086
- Finite element analysis of fatigue crack growth threshold testing techniques
- (Edited by T. Flournay)
- (1999) Third Joint FAA/DoD/NASA Conference on Aging Aircraft, Albuquerque, NM
- Skinner, J.D.¹ Daniewicz, S.R.²

10
- 0019627111
- A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading
- ASTM STP 748, (Edited by J. B. Chang and C. M. Hudson). American Society of Testing and Materials, Philadelphia, PA
- (1981) Methods and Models for Predicting Fatigue Crack Growth Under Random Loading , pp. 53-84
- Newman Jr., J.C.¹

11
- 0000931316
- Finite element analysis of fatigue crack closure: A historical and critical review
- (Edited by X. R. Wu and Z. G. Wang). Beijing Institute of Aeronautical Materials, Beijing, China
- (1999) Fatigue '99. The Seventh International Fatigue Conference, Beijing, China , pp. 2655-2660
- McClung, R.C.¹

12
- 0008187594
- Standard test method measurement of fatigue crack growth rates
- E647-00; (Edited by). American Society of Testing and Materials, Philadelphia, PA
- (2001) 2001 Annual Book of ASTM Standards , vol.3 , pp. 594-635

13
- 0003490132
- NASA TM 104159. NASA, Washington, DC
- (1992) FASTRAN-II-A Fatigue Crack Growth Structural Analysis Program
- Newman Jr., J.C.¹

14
- 0028481615
- Finite element analysis of specimen geometry effects on fatigue crack closure
- (1994) Fatigue Fract. Engng Mater. Struct. , vol.17 , pp. 861
- McClung, R.C.¹

15
- 85034979756
- Comparison of methods for measuring fatigue crack closure in a thick specimen
- ASTM STP 982, (Edited by J. C. Newman Jr and W. Elber). American Society of Testing and Materials, Philadelphia, PA
- (1988) Mechanics of Fatigue Crack Closure , pp. 197-213
- Ray, S.K.¹ Grandt Jr., A.F.²

16
- 0033360275
- An evaluation of plasticity-induced crack closure concept and measurement methods
- ASTM STP 1343, (Edited by R. C. McClung and J. C. Newman, Jr) American Society of Testing and Material, Philadelphia, PA
- (1999) Advances in Fatigue Crack Closure Measurement and Analysis: Second Volume , pp. 128-144
- Newman Jr., J.C.¹

17
- 84981660973
- Analysis of crack closure under plane strain conditions
- ASTM STP 982, (Edited by J. C. Newman Jr and W. Elber). American Society of Testing and Materials, Philadelphia, PA
- (1988) Mechanics of Fatigue Crack Closure , pp. 319-341
- Fleck, N.A.¹ Newman Jr., J.C.²

18
- 85167399077
- Three-dimensional finite-element simulation of fatigue crack growth and closure
- ASTM STP 982, (Edited by J. C. Newman Jr and W. Elber). American Society of Testing and Materials, Philadelphia, PA
- (1988) Mechanics of Fatigue Crack Closure , pp. 398-413
- Chermahini, R.G.¹ Shivakumar, K.N.² Newman Jr., J.C.³

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.