Computational fracture analysis of different specimens regarding 3D and mode coupling effects

Engineering Fracture Mechanics

Volumn 68, Issue 4, 2001, Pages 383-401

  Dhondt, G ^a   Chergui, A ^b   Buchholz, F G ^b  

^a MTU AERO ENGINES GMBH   (Germany)

^b UNIVERSITY OF PADERBORN   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL GEOMETRY; COMPUTATIONAL METHODS; COMPUTER SIMULATION; CRACK PROPAGATION; FINITE ELEMENT METHOD; SHEAR DEFORMATION; STRAIN; STRESS ANALYSIS; STRESS INTENSITY FACTORS; COMPUTATIONAL COMPLEXITY; INTEGRAL EQUATIONS; STRAIN RATE;

MIXED-MODE FRACTURES; MODE COUPLING EFFECTS;

FRACTURE MECHANICS;

MODE COUPLING EFFECTS; QUARTER CIRCULAR CORNER CRACKS;

COUPLING; CRACK PROPAGATION; FINITE ELEMENT ANALYSIS; SHEAR STRESS; STRESS INTENSITY FACTOR;

EID: 0035936711     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0013-7944(00)00104-1     Document Type: Article

References (39)

1. Erdogan F, Sih GC. On the crack extension in plates under plane loading and transverse shear. J Basic Engng 1963;85:519-27.
2. Williams JG, Ewing PD. Fracture under complex stress - the angle crack problem. Int J Fract 1972;8:441-6.
3. Sih GC. Strain energy density applied to mixed mode crack problems. Int J Fract 1974;10:305-21.
4. Hussain MA, Pu SI, Underwood JH. Strain energy release rate for a crack under combined mode I and mode II. Fracture analysis. ASTM STP 560. Philadelphia, PA: American Society for Testing of Materials; 1974. p. 2-28.
5. Nuismer RJ. An energy release rate criterion for mixed mode fracture. Int J Fract 1975;11:245-50.
6. Wu CH. Fracture under combined loads by maximum-energy-release-rate criterion. J Appl Mech ASME 1978;45:553-8.
7. Palaniswamy K, Knauss WG. On the problem of crack extension in brittle solids under general loading. In: Nemat-Nasser S, editor. Mech Today, vol. 4. New York, 1978.
8. Cotterell B, Rice JR. Slightly curved or kinked cracks. Int J Fract 1980;16:155-69.
9. Sumy Y, Nemat-Nasser S, Keer LM. On crack branching and curving in a finite body. Int J Fract 1983;21:67-79.
10. Sumy Y, Nemat-Nasser S, Keer LM. On crack branching and curving in a finite body. Erratum in Int J Fract 1984;24:159.
11. Amestoy M, Bui HD, Dang-Van K. Analytic asymptotic solution of the kinked crack problem. In: Francois D, editor. Advances in fracture research. 1981. p. 107-13.
12. Leblond JB, Amestoy M. The stress intensity factors at the tip of a kinked and curved crack. In: Salama K, editor. Advances in fracture research. Proceedings of the Seventh International Conference on Fracture, vol. 3. 1989. p. 2339-46.
13. Richard HA. A new compact shear specimen. Int J Fract 1981;17:R105-7.
14. Richard HA, Benitz K. A loading device for the creation of mixed mode in fracture mechanics. Int J Fract 1983;22:R55-8.
15. Richard HA. Bruchvorhersagen bei überlagerter Normal- und Schubbeanspruchung von Rissen. VDI-Forschungsheft 631, Düsseldorf: VDI-Verlag, 1985.
16. Richard HA, Benitz K. A loading device for the creation of mixed mode in fracture mechanics. Int J Fract 1983;22:55-8.
17. Dhondt G. Cutting of 3-D finite element mesh for automatic mode I crack propagation calculations. Int J Num Meth Engng 1998;42:749-72.
18. Rybicki EF, Kanninen MF. A finite element calculation of stress intensity factors by a modified crack closure integral. Engng Fract Mech 1977;9:931-8.
19. Isida M. Analysis of stress intensity factors for the tension of the centrally cracked strip with stiffened edges. Engng Fract Mech 1973;5:647-65.
20. Murakami Y, editor. Stress intensity factors handbook. Oxford: Pergamon Press; 1987.
21. Pook LP. A finite element analysis of the angle crack specimen. In: Rossmanith HP, editor. Mixed-mode fatigue and fracture, ESIS 14. London: Mech Engng; 1983. p. 285-302.
22. Buchholz FG, Grebner H, Dreyer KH, Krome H. 2D- and 3D-applications of the improved and generalized modified crack closure integral method. In: Atluri et al., editors. Comp. Mechanics 88, vol. 1. New York: Springer; 1988. p. 14.i.1-4.
23. Narayana KB, Krishnamurthy T, Dattaguru B, Ramamurthy TS, Vijay Kumar K. Modified crack closure integral for three dimensional crack problems. Paper Presented at International Conference on Computational Engineering Science (ICES), Atlanta, GA, USA, 1988.
24. Buchholz F-G. Improved formulae for the finite element calculation of the strain energy release rate by the modified crack closure integral method. In: Robinson J, editor. Accuracy, Reliability and Training in FEM Technology. Dorset: Robinson and Associates; 1984. p. 650-9.
25. Mi Y, Aliabadi MH. Three dimensional crack growth simulation using BEM. Comput Struct 1994;52:871-8.
26. Kuna M. Konstruktion und Anwendung hybrider Rißspitzenelemente für dreidimensionale bruchmechanische Aufgaben. Techn Mechanik 1982;3:37-43.
27. Barlow J. More on optimal stress points - reduced integration, element distortions and error estimation. Int J Num Meth Engng 1989;28(7):1487-504.
28. Benthem JP. The quarter-infinite crack in a half space; alternative and additional solutions. Int J Num Meth Engng 1980;16:119-30.
29. Dhondt G. Analysis of the boundary layer at the free surface of a half circular crack. Engng Fract Mech 1998;60(3):273-90.
30. Dhondt G. On corner point singularities along a quarter circular crack subject to shear loading. Int J Fract 1998;89:L33-8.
31. Dhondt G. General behaviour of collapsed 8-node 2-D and 20-node 3-D isoparametric elements. Int J Num Meth Engng 1993;36:1223-43.
32. Hahn HG, Bruchmechanik. BG. Teubner Stuttgart, 1976.
33. Dhondt G. Automatic 3-D mode I crack propagation calculations with finite elements. Int J Num Meth Engng 1998;41:739-57.
34. Pook LP. On the fatigue crack paths. Int J Fatigue 1995;17:5-13.
35. Hull D. The effect of mixed mode I/III on crack evolution in the brittle solids. Int J Fract 1995;70:59-79.
36. Buchholz FG, Richard HA. Fracture analysis of non-coplanar crack extension under mixed-mode loading by the crack closure integral method. In: Salama K et al. editors, Proceedings of the Seventh International Conference on Fracture (ICF 7), Houston, TX, USA, March 1989. Advances in Fracture Research, vol. 3. Oxford: Pergamon Press; 1989. p. 2301-8.
37. Buchholz FG, Richard HA. Fracture analysis of non-coplanar crack extension under mixed-mode loading by the crack closure integral method. In: Salama K et al. editors, Proceedings of the Seventh International Conference on Fracture (ICF 7), Houston, TX, USA, March 1989. Advances in Fracture Research, vol. 3. Oxford: Pergamon Press; 1989. p. 2301-8.
38. Buchholz FG. Finite element analysis of crack-propagation under mixed-mode loading conditions. In: Zhemin Z, editor. Proceedings of the International Conference, Beijing, China, August 1989. Applied Mechanics, vol. 3. Oxford: Pergamon Press; 1989. p. 1459-64.
39. Buchholz FG. Finite element analysis of crack-propagation under mixed-mode loading conditions. In: Zhemin Z, editor. Proceedings of the International Conference, Beijing, China, August 1989. Applied Mechanics, vol. 3. Oxford: Pergamon Press; 1989. p. 1459-64.