Dynamic material properties and inelastic failure in structural crashworthiness

International Journal of Crashworthiness

Volumn 6, Issue 1, 2001, Pages 7-18

  Jones, Norman ^a  

^a UNIVERSITY OF LIVERPOOL   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0035631430     PISSN: 13588265     EISSN: 17542111     Source Type: Journal    
DOI: 10.1533/cras.2001.0158     Document Type: Article

References (40)

1. N Jones, ‘Some phenomena in the structural crashworthiness field’, Int J Crashworthiness, 1999, 4 (4) 335-350.
2. A G Hanssen, M Langseth and O S Hopperstad, 'Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler’, Int J Impact Engng, 2000 24 (5) 475-507.
3. S P Santosa, T Wierzbicki, A G Hanssen and M Langseth, "Experimental and numerical studies of foam-filled sections’, Int J Impact Engng, 2000 24 (5) 509-534.
4. W Abramowiez and N Jones, 'Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically, Int J Impact Engng, 1997 19(5/6)415-437.
5. J J Harrigan, S R Reid and C Peng, ‘Inertia effects in impact energy absorbing materials and structures', Int J Impact Engng, 1999 22 (9/10) 955-979.
6. D Karagiozova and N Jones, "Dynamic elastic-plastic buckling of circular cylindrical shells under axial impact’. Int J Solids and Structures, 2000, 37, 2005-2034.
7. N Jones, "Dynamic inelastic failure of structures’, Trans Japanese Society of Mech Engrs, 1997 63 (616) 2485-2495.
8. N Jones, "Some comments on the modelling of material properties for dynamic structural plasticity’. Int Conf on the Mechanical Properties of Materials at High Rates of Strain, Oxford, Institute of Physics Conference Series No 102, 1989, 435-445.
9. N Jones, Structural Impact, Cambridge, Cambridge University Press, 1989. Paperback edition, 1997.
10. N Jones, ‘Some remarks on the strain-rate sensitive behaviour of shells’. Problems of Plasticity, Vol. 2. Ed A Sawzuk, Noordhoff, 1974, 403-407.
11. K Kawata, S Fukui, J Seino and N Takada, "Some analytical and experimental investigations on high velocity elongation of sheet materials by tensile shock’, Proc IUTAM Symposium on Behaviour of Dense Media Under High Dynamic Pressure, Dunod, Paris, 1968, 313-323.
12. C Albertini and M Montagnani, ‘Dynamic uniaxial and biaxial stress-strain relationships for austenitic stainless steels’, Nuclear Eng and Design, 1980, 57 107-123.
13. N Jones, "On the dynamic inelastic failure of beams’, Structural Failure, Eds T Wierzbicki and N Jones, John Wiley, 1989 133-159.
14. B S Holmes, S W Kirkpatrick, J W Simons, J H Giovanola and L Seaman, ‘Modeling the process of failure in structures'. Structural Crashworthiness and Failure, Eds N Jones and T Wierzbicki, Elsevier Applied Science. 1993. 55-93.
15. M Alves and N Jones, ‘Influence of hydrostatic stress on failure of axisymmetric notched specimens', J of the Mechs and Physics of Solids, 1999 47 (3) 643-667.
16. P Bridgman, Studies in Large Plastic Flow and Fracture, New York, McGraw-Hill Book Company. Inc., 1952.
17. S B Menkes and H J Opat, ‘Broken beams’, Experimental Mechanics, 1973 13 480-486.
18. N Jones, ‘Plastic failure of ductile beams loaded dynamically’, Trans ASME J of Engng for Industry, 1976 98(81) 131-136.
19. J G de Oliveira and N Jones, ‘Some remarks on the influence of transverse shear on the plastic yielding of structures'. Int J Mech Sciences, 1978 20 (11) 759-765.
20. T X Yu and F L Chen, ‘Further studies on the plastic shear failure of impulsively loaded clamped beams'. Impact Response of Materials and Structures, Eds V P W Shim, S. Tanimura and C T Lim, Oxford. 1999, 101-111.
21. R G Teeling-Smith and G N Nurick, ‘The deformation of tearing of thin circular plates subjected to impulsive loads'. Int J Impact Engng, 1991 11 (1) 77-91.
22. H M Wen, T Y Reddy and S R Reid, ‘Deformation and failure of clamped beams under low speed impact loading'. Int J Impact Engng, 1995 16(3) 435-454.
23. Wang Lili and N Jones, 'An analysis of the shear failure of rigid-linear hardening beams under impulsive loading. Acta Mechanica Sinica, 1996 12(4) 338-348.
24. Q M Li and N Jones, 'Shear and adiabatic shear failures in an impulsively loaded fully clamped beam'. Int J Impact Engng, 1999 22 (6) 589-607.
25. W S Jouri and N Jones, 'The impact behaviour of aluminium alloy and mild steel double-shear specimens'. Int J Mech Sciences, 1988 30(3/4) 153-172.
26. D J Bammann, M L Chiesa, M F Horstemeyer and L I Weingarten. ‘Failure in Ductile materials using finite element methods”. Structural Crashworthiness and Failure, Eds N Jones and T Wierzbicki. Elsevier Applied Science. 1993. 1 -54.
27. W Oliferuk, W A Swiatnicki and M W Grabski, ‘Rate of energy storage and microstructure evolution during the tensile deformation of Austentic steel’, Material Sci Eng, 1993, A161 55.
28. S E Clift, P Hartley, C E N Sturgess and G W Rowe, 'Further prediction in plastic deformation processes'. Int J Mechanical Sciences, 1990. 32 (1), 1-17.
29. W Q Shen and N Jones, ‘A failure criterion for beams under impulsive loading'. Int J lmpact Engng, 1992 12(1) 101-121 and 12 (2) 329.
30. W Q Shen and N Jones, 'Dynamic plastic response and failure of a clamped beam struck transversely by a mass', Int J Solids and Structures, 1993 30 121 1631-1648.
31. N Jones and W Q Shen, 'Criteria for the inelastic rupture of ductile metal beams subjected to large dynamic loads'. Structural Crashworthiness and Failure, Eds N Jones and T Wierzbicki, London, Elsevier, 1993. 95-130.
32. W Q Shen and N Jones, ‘Dynamic response and failure of fully clamped circular plates under impulsive loading'. Int J Impact Engng, 1993 13 (2) 259-278.
33. J Yu and N Jones, ‘Further experimental investigations on the failure of clamped beams under impact loads', Int J Solids and Structures, 1991 27 (9) 1113-1137.
34. J Yu and N Jones, ‘Numerical simulation of impact loaded steel beams and the failure criteria', Int J Solids and Structures, 1997 34 (30), 3977-4004.
35. N Jones and C Jones, ‘Dynamic inelastic failure of beams and plates’. Impact Response of Materials and Structures. Eds V P W Shim. S Tanimura and C T Lim. Oxford, 1999, 37-47.
36. G G Corbett, S R Reid and W Johnson, impact loading of plates and shells by free-flying projectiles: A review'. Int J Impact Engng, 1996 18(2) 141-230.
37. N Jones, S B Kim and Q M Li, ‘Response and failure analysis of ductile circular plates struck by a mass". Trans. ASME, J Pressure Vessel Tech, 1997 119 (3) 332-342.
38. R L Woodward, 'The Interrelation of Failure Modes Observed in the Penetration of Metallic Targets'. Int J Impact Engng. 1984 2 (2) 121-129.
39. M Alves and N Jones, impact failure of beams using damage mechanics: Part 1. analytical model', Impact Research Centre Report No. IRC/145/97, 2000, Dept, of Engineering, The University of Liverpool.
40. M Alves and N Jones, impact failure of beams using damage mechanics: Part 2, applicaton'. Impact Research Centre Report No. IRC/146/97, 2000, Dept, of Engineering, The University of Liverpool.