The thermoviscoelastoplastic state of shells of revolution under axisymmetric deformation along various flat paths

International Applied Mechanics

Volumn 37, Issue 8, 2001, Pages 967-997

  Shevchenko, Yu N ^a   Babeshko, M E ^a  

^a S P TIMOSHENKO INSTITUTE OF MECHANICS   (Ukraine)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0035413425     PISSN: 10637095     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1013042602090     Document Type: Article

References (109)

1. 1. M. E. Babeshko, "An approximate technique to describe the lag in the vector properties of materials under complex nonisothermal loading," Prikl. Mekh., 27, No. 3, 83-88 (1991).
2. 2. M. E. Babeshko, "Determination of the mismatch angle for the stress and strain vectors under complex loading," Prikl. Mekh., 27, No. 8, 110-114 (1991).
3. 3. M. E. Babeshko, "The axisymmetric elastoplastic stress-strain state of flexible multilayered shells made of isotropic and orthotropic materials," Prikl. Mekh., 29, No. 11, 87-94 (1993).
4. 4. M. E. Babeshko, "The elastoplastic axisymmetric stress state of multilayered shells deformed along slightly curved paths," Prikl. Mekh., 30, No. 1, 38-44 (1994).
5. 5. M. E. Babeshko, "Numerical study of the thermoviscoelastoplastic axisymmetric stress-strain state of flexible laminated shells," Prikl. Mekh., 30, No. 8, 80-87 (1994).
6. 6. M. E. Babeshko, Thermoviscoelastoplastic Axisymmetric Deformation of Multilayered Shells under Loading along Various Flat Paths [in Russian], Author's Abstract of Doctoral Dissertation (1995).
7. 7. M. E. Babeshko, "Numerical study of the elastoplastic state of laminated shells under axisymmetric deformation along slightly curved paths, including geometrical nonlinearity," Prikl. Mekh., 32, No. 8, 80-86 (1996).
8. 8. M. E. Babeshko, N. S. Braikovskaya, S. M. Zakharov et al., "Study of complex nonisothermal loading of thin shells of revolution," in: Proc. All-Union Symp. on Creep in Structures (September 21-24, 1982, Dnepropetrovsk) [in Russian], Izd. Dnepropetrovskogo Univ. (1982), pp. 118-119.
9. 9. M. E. Babeshko, A. Z. Galishin, V. A. Merzlyakov, V. G. Savchenko, and Yu. N. Shevchenko, "On some approaches to the solution of boundary-value thermoviscoplastic problems," in: Boundary-Value Problems of Mechanics: A Collection of Scientific Papers Issued on the Occasion of the 80th Anniversary of ScD Prof. Yu. M. Kolyano [in Russian], Kiev (1996), pp. 56-61.
10. 10. M. E. Babeshko, A. Z. Galishin, and I. V. Prokhorenko, "Thermoelastoplastic creep-strain analysis of shells of revolution," Prikl. Mekh., 18, No. 10, 34-38 (1982).
11. 11. M. E. Babeshko, A. Z. Galishin, V. I. Gololobov, V. B. Kovbasenko, V. A. Kovtunenko, G. V. Melakh, V. A. Merzlyakov, and Yu. N. Shevchenko, "Stress-strain analysis of steamlines with corrugated expansion joints," Probl. Mashinostr. Nadezhn. Mashin., Mashinovedenie, No. 6, 50-55 (1991).
12. 12. M. E. Babeshko, A. Z. Galishin, and Yu. N. Shevchenko, "Axisymmetric elastoplastic stress analysis of thin reinforced shells," in: Abstracts of Papers Read at the 9th Far East Sci. Eng. Conf. on Damage and Operational Reliability of Ship Structures [in Russian], Vladivostok (1984), pp. 231-233.
13. 13. M. E. Babeshko, V. V. Piskun, and I. V. Prokhorenko, "The axisymmetric elastoplastic stress-strain state of shells with isotropic and orthotropic layers," Prikl. Mekh., 27, No. 12, 39-45 (1991).
14. 14. M. E. Babeshko, V. V. Piskun, V. G. Savchenko, and Yu. N. Shevchenko, "The elastoplastic state of elements of engineering structures under complex nonisothermal loading," in: General Problems and Methods of Plastic and Viscoelastic Analysis of Materials and Structures [in Russian], Sverdlovsk (1986), pp. 3-8.
15. 15. M. E. Babeshko and I. V. Prokhorenko, "The axisymmetric thermoviscoelastoplastic stress-strain state of laminated shells made of isotropic and orthotropic materials," Prikl. Mekh., 30, No. 12, 55-61 (1994).
16. 16. M. E. Babeshko, I. V. Prokhorenko, and A. Z. Galishin, "The axisymmetric thermoplastic analysis of laminated shells based on the theory of small-curvature processes," Prikl. Mekh., 18, No. 9, 35-40 (1982).
17. 17. M. E. Babeshko, I. V. Prokhorenko, and V. I. Sokolovskaya, "Axisymmetric thermoelastoplastic stress-strain analysis of a laminated shell under secondary loading," Prikl. Mekh., 23, No. 11, 51-56 (1987).
18. 18. M. E. Babeshko, I. V. Prokhorenko, and V. I. Sokolovskaya, "Thermoelastoplastic stress-strain analysis of thin-walled rotational-shell elements of an aircraft under secondary loading," in: Abstracts of Papers Read at the 3rd All-Union Conf. on Current Problems of Engineering Mechanics and Strength of Aircraft (September 20-22, 1988) [in Russian], Kazan' (1988), p. 12.
19. 19. M. E. Babeshko, V. G. Savchenko, and V. I. Sokolovskaya, "Methods of axisymmetric thermostressed analysis of shells under complex loading," in: Proc. 14th All-Union Conf. on the Theory of Plates and Shells [in Russian], Vol. 1, Izd. Tbilisskogo Univ., Tbilisi (1987), pp. 128-133.
20. 20. I. A. Birger, "Some general methods for solution of plastic problems," Prikl. Mat. Mekh., 15, No. 6, 765-770 (1951).
21. 21. I. A. Birger, "The method of secondary strains in plastic theory," Izv. AN SSSR, Ser. Mekh. Mashinostr., No. 1, 47-56 (1963).
22. 22. I. A. Birger, "Methods of elastic solutions in plastic-flow theory," Izv. AN SSSR, Ser. Mekh. Mashinostr., No. 2, 116-118 (1964).
23. 23. I. A. Birger, "Plastic-and-creep structural analysis," Izv. AN SSSR, Mekh., No. 2, 113-119 (1965).
24. 24. A. I. Borisyuk, "The axisymmetric elastoplastic stress state of shells of revolution," Prikl. Mekh., 2, No. 11, 47-54 (1966).
25. 25. A. I. Borisyuk "The elastoplastic stress state of shells of revolution under axisymmetric secondary loading," in: Thermal Stresses in Structural Elements [in Russian], Issue 8, 157-165 (1969).
26. 26. A. I. Borisyuk, "Thermoelastoplastic analysis of a conic shell," in: Thermal Stresses in Structural Elements [in Russian], Issue 11, 119-121.
27. 27. A. I. Borisyuk, "Shell design under the compressible theory of small elastoplastic deformation," in: Thermal Stresses in Structural Elements [in Russian], Issue 12, 52-58 (1972).
28. 28. A. I. Borisyuk, "Axisymmetric stress analysis of a conic shell under various boundary conditions," in: Thermal Stresses in Structural Elements [in Russian], Issue 13, 32-36 (1973).
29. 29. A. I. Borisyuk and I. A. Motovilovets, "On the temperature field in a shell of variable thickness," Prikl. Mekh., 3, No. 12, 84-89 (1967).
30. 30. A. Z. Galishin, "The axisymmetric thermoelastoplastic stress-strain state of branched shells," in: Proc. 9th Sci. Conf. Young Scientists Inst. Mech. Acad. Sci. USSR (Manuscript No. 2644-82 deposited at VINITI 05.27.82) [in Russian], Kiev (1981), pp. 54-59.
31. 31. A. Z. Galishin, "Axisymmetric stress-strain analysis of shells of revolution with a branched meridian," Prikl. Mekh., 20, No. 1, 66-71 (1984).
32. 32. A. Z. Galishin, "Axisymmetric thermoelastoplastic stress-strain analysis of branched shells under simple loading," Prikl. Mekh., 20, No. 8, 46-50 (1984).
33. 33. A. Z. Galishin, M. E. Babeshko, V. A. Merzlyakov, K. A. Mavrienko, and I. V. Prokhorenko, A Software Package for Axisymmetric Thermoelastoplastic Stress-Strain Analysis of Branched Shells [in Russian], No. 50850001009, Gos. Fond Algoritm. Program, Kiev (1985).
34. 34. A. Z. Galishin, "Axisymmetric thermoviscoelastoplastic stress-strain analysis of branched-rotational-shell-like elements of an aircraft," in: Abstracts of Papers Read at the 2nd All-Union Conf. on Current Problems of Engineering Mechanics and Strength of Aircraft [in Russian], Kuibyshev (1986), p. 117.
35. 35. A. Z. Galishin, "Axisymmetric thermoviscoelastoplastic analysis of shells of revolution with a branched meridian under simple loading," in: Proc. 12th Sci. Conf. Young Scientists Inst. Mech. Acad. Sci. USSR (Manuscript No. 5389-V87 deposited at VINITI 07.29.87) [in Russian], Kiev (1987), pp. 17-21.
36. 36. A.Z. Galishin, "The axisymmetric elastoplastic stress state of branched shell systems under nonisothermal loading," Prikl. Mekh., 24, No. 3, 34-39 (1988).
37. 37. A. Z. Galishin, "The axisymmetric thermoviscoelastoplastic state of engine elements as shells of revolution with a branched meridian," in: Abstracts of Papers Read at the 22th All-Union Meeting on Engine Strength Problems [in Russian], Moscow (1988), pp 59-60.
38. 38. A. Z. Galishin, "The axisymmetric thermoelastoplastic state of laminated shells with a branched meridian," in: Proc. 13th Sci. Conf. Young Scientists Inst. Mech. Acad. Sci. USSR (Manuscript No. 9071-V88 deposited at VINITI 12.27.88) [in Russian], Kiev (1988), pp. 10-14.
39. 39. A. Z. Galishin, "Analysis of nonstationary axisymmetric temperature fields in shells of revolution with a branched meridian," Probl. Prochn., No. 5, 81-85 (1989).
40. 40. A. Z. Galishin, "Axisymmetric thermoviscoelastoplastic analysis of laminated orthotropic shells of revolution with a branched meridian," Prikl. Mekh., 29, No. 1, 61-69 (1993).
41. 41. A. Z. Galishin and D. A. Ishchenko, "Applicability of the Kirchhoff-Love hypotheses to the axisymmetric thermoelastoplastic stress-strain analysis of branched shells," in: Proc. 11th Sci. Conf. Young Scientists Inst. Mech. Acad. Sci. USSR (Manuscript No. 5507-V86 deposited at VINITI 07.28.86) [in Russian], Kiev (1986), pp. 458-463.
42. 42. A. Z. Galishin, D. A. Ishchenko, V. A. Merzlyakov, and V. G. Savchenko, "Applicability of the Kirchhoff-Love hypotheses to the thermoelastoplastic analysis of cylindrical shells," Prikl. Mekh., 27, No. 2, 66-71 (1991).
43. 43. A. Z. Galishin and V. A. Merzlyakov, "Determination of nonstationary temperature fields in axisymmetrically heated branched shells of revolution," Probl. Prochn., No. 9, 94-99 (1987).
44. 44. A. Z. Galishin and V. A. Merzlyakov, "Axisymmetric thermoelastoplastic analysis of laminated branched shells under secondary loading," Prikl. Mekh., 28, No. 10, 47-52 (1992).
45. 45. A. Z. Galishin and I. Yu. Pleshkanovskii, Kinetic Analysis of Axisymmetric Thermoelastoplastic Deformation of Shells of Revolution along Arbitrary Flat Paths [in Russian], Manuscript No. 5231-V86 deposited at VINITI 07.17.86, Kiev (1986).
46. 46. S. K. Godunov, "Numerical solution of boundary-value problems for systems of linear ordinary differential equations," Usp. Mat. Nauk, 16, No. 3, 171-174 (1961).
47. 47. Ya. M. Grigorenko and A. T. Vasilenko, The Theory of Variable-Rigidity Shells, Vol. 4 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kiev (1981).
48. 48. V. P. Degtyarev, Plasticity and Creep of Engineering Structures [in Russian], Mashinostroenie, Moscow (1976).
49. 49. A. A. Il'yushin, "Some issues of plastic deformation theory," Prikl. Mat. Mekh., 7, No. 4, 245-272 (1943).
50. 50. A. A. Il'yushin, "An approximate theory of elastoplastic deformation of an axisymmetric shell," Prikl. Mat. Mekh., 8, No. 1, 15-24 (1944).
51. 51. A. A. Il'yushin, Plasticity [in Russian], Gostekhizdat, Moscow (1948).
52. 52. A. A. Il'yushin, Plasticity: Fundamentals of the General Mathematical Theory [in Russian], Izd. AN SSSR, Moscow (1963).
53. 53. V. S. Lenskii, "Some new data on plasticity of metals under complex loading," Izv. AN SSSR, Otd. Tekhn. Nauk, Mekh. Mashinostr., No. 5, 57-65 (1960).
54. 54. V. S. Lenskii, "Experimental validation of the basic postulates of general elastoplastic deformation theory," in: Issues of Plastic Theory [in Russian], Moscow (1961), pp. 58-82.
55. 55. S. G. Lekhnitskii, The Elastic Theory of an Anisotropic Body [in Russian], Nauka, Moscow (1977).
56. 56. V. V. Piskun, "The elastoplastic axisymmetric stress state of a circular cylindrical shell of constant thickness under nonstationary heating." in: Thermal Stresses in Structural Elements [in Russian], Issue 6, 79-88 (1966).
57. 57. V. V. Piskun, "The stress state of a cylindrical shell under nonisothermal loading," in: Thermal Stresses in Structural Elements [in Russian], Issue 9, 210-219 (1970).
58. 58. V. V. Piskun, "Study of the deformation of a heated elastoplastic cylindrical shell," in: Thermal Stresses in Structural Elements [in Russian], Issue 12, 58-62 (1972).
59. 59. I. Yu. Pleshkanovskii, "The solution of problems of axisymmetric thermoelastoplastic deformation of thin shells of revolution based on the structural medium model," in: Proc. 11th Sci. Conf. Young Scientists Inst. Mech. Acad. Sci. USSR (Manuscript No. 5507-V86 deposited at VINITI 07.28.86) [in Russian], Kiilov (1986), pp. 548-553.
60. 60. I. Yu. Pleshkanovskii, The Axisymmetric Elastoplastic State of Thin Shells under Nonisothennal Loading along Arbitrary Paths [in Russian], Author's Abstract of Ph.D. Thesis, Kiev (1986).
61. 61. I. V. Prokhorenko, "The thermoplastic stress state of shells of revolution," in: Thermal Stresses in Structural Elements [in Russian], Issue 11, 127-131 (1971).
62. 62. I. V. Prokhorenko, "Applicability of small elastoplastic deformation theory to the elastoplastic stress analysis of a cylindrical shell under nonisothermal loading," in: Thermal Stresses in Structural Elements [in Russian], Issue 18, 43-45 (1978).
63. 63. I. V. Prokhorenko, "The thermostressed state of laminated shells of revolution with creep strains in orthotropic layers under simple loading," Prikl. Mekh., 30, No. 9, 46-50 (1994).
64. 64. I. V. Prokhorenko and M. E. Babeshko, A Software Package for Elastoplastic Stress Analysis of Thin-Walled Shells of Revolution [in Russian], No. 4989, Ukr. Resp. Fond Algoritm. Program, Kiev (1978).
65. 65. I.V. Prokhorenko and V. V. Piskun, "The thermoelastoplastic state of shells of revolution under reloading," in: Thermal Stresses in Structural Elements [in Russian], Issue 13, 36-38 (1973).
66. 66. I. V. Prokhorenko and V. G. Savchenko, "Applicability of the Kirchhoff-Love hypothesis to the elastoplastic analysis of nonuniformly heated shells," Probl. Prochn., No. 6, 57-59 (1983).
67. 67. V. G. Savchenko, V. V. Piskun, M. E. Babeshko, and I. V. Prokhorenko, "A numerical method for solution of axisymmetric heat-conductivity and thermoplasticity problems for solids of revolution," in: Thermal Stresses in Structural Elements [in Russian], Issue 19, 38-43 (1979).
68. 68. L. A. Shapovalov, "On one elementary type of the equations of geometrically nonlinear theory of thin shells," Izv. AN SSSR, Ser. Mekh. Tverd. Tela, No. 1, 56-62 (1968).
69. 69. Yu. N. Shevchenko, "The elastoplastic stress state of a disk in an axisymmetric temperature field," in: Thermal Stresses in Structural Elements [in Russian], Issue 3, 89-110 (1963).
70. 70. Yu. N. Shevchenko, "The elastoplastic stress state of a disk under reloading," Thermal Stresses in Structural Elements [in Russian], Issue 8, 143-156 (1969).
71. 71. Yu. N. Shevchenko, Thermoplasticity under Variable Loading [in Russian], Naukova Dumka, Kiev (1970).
72. 72. Yu. N. Shevchenko, "Approximate methods for solution of thermoplastic loading-history problems," Thermal Stresses in Structural Elements [in Russian], Issue 7, 37-48 (1967).
73. 73. Yu. N. Shevchenko and M. E. Babeshko, "The constitutive deformation-type equations describing thermoviscoelastoplastic deformation along flat paths," Prikl. Mekh., 26, No. 6, 38-44 (1990).
74. 74. Yu. N. Shevchenko and M. E. Babeshko, "Elastoplastic deformation of laminated shells of revolution under complex axisymmetric loading," Prikl. Mekh., 33, No. 8, 31-38 (1997).
75. 75. Yu. N. Shevchenko, M. E. Babeshko, A. Z. Galishin, V. A. Merzlyakov, V. B. Kovbasenko, V. A. Kovtunenko, V. M. Leshchenko, and G. V. Melakh, "Thermoelastoplastic stress-strain analysis of pipelines with expansion joints," Probl. Prochn., No. 12, 74-79 (1989).
76. 76. Yu. N. Shevchenko, M. E. Babeshko, and V. I. Gololobov, "Numerical stress-strain analysis of heat-insulated sections of a steam tubing string," Probl. Prochn., No. 5, 18-23 (1992).
77. 77. Yu. N. Shevchenko, M. E. Babeshko, and V. I. Gololobov, "A technique for axisymmetric thermoelastoplastic stress-strain analysis of expansion joints of heat-insulated pipelines," Probl. Prochn., No. 8, 87-93 (1992).
78. 78. Yu. N. Shevchenko, M. E. Babeshko, V. V. Piskun, and V. G. Savchenko, Spatial Thermoplastic Problems [in Russian], Naukova Durnka, Kiev (1980).
79. 79. Yu. N. Shevchenko, M. E. Babeshko, V. V. Piskun, I. V. Prokhorenko, and V. G. Savchenko, Solution of an Axisymmetric Thermoplastic Problem for Thin- and Thick-Walled Solids of Revolution on an EU Computer [in Russian], Naukova Dumka, Kiev (1980).
80. 80. Yu. N. Shevchenko, M. E. Babeshko, V. V. Piskun, I. V. Prokhorenko, V. G. Savchenko, V. K. Stryuk, and R. G. Terekhov, "Solution of axisymmetric thermoplastic problems on an EDC," in: Applied Problems of Strength and Plasticity [in Russian], Issue 1, 67-76 (1975).
81. 81. Yu. N. Shevchenko, M. E. Babeshko, and I. V. Prokhorenko, A Technique for Solution of an Axisymmetric Thermoviscoplastic Problem for Thin Laminated Shells on an EU Computer [in Russian], Naukova Dumka, Kiev (1981).
82. 82. Yu. N. Shevchenko, M. E. Babeshko, and I. V. Prokhorenko, "Mathematical simulation of axisymmetric thermoviscoplastic deformation of laminated shells of revolution," in: Proc. 7th All-Union Conf. on Numerical Methods for Solution of Elastic and Plastic Problems [in Russian], Novosibirsk (1982), pp. 80-88.
83. 83. Yu. N. Shevchenko, M. E. Babeshko, and R. G. Terekhov, Thermoviscoelastoplastic Complex Deformation of Structural Elements [in Russian], Naukova Dumka, Kiev (1992).
84. 84. Yu. N. Shevchenko and A. Z. Galishin, "Axisymmetric thermoviscoelastoplastic deformation of branched shell structures," Prikl. Mekh., 25, No. 2, 35-44 (1989).
85. 85. Yu. N. Shevchenko and E. I. Zakon, "A structural medium model for complex nonisothermal processes of loading," Dokl. AN USSR, Ser. A, No. 6, 42-46 (1983).
86. 86. Yu. N. Shevchenko, S. V. Kulakov, V. N. Bastun, and R. G. Terekhov, "Applicability of some plastic theories to the description of reloading along various rectilinear paths," Probl. Prochn., No. 6, 48-52 (1980).
87. 87. Yu. N. Shevchenko, I. A. Motovilovets, V. G. Savchenko, and V. N. Vasilenko, "The elastoplastic state of a reheated asymmetric disk," Prikl. Mekh., 4, No. 2, 28-35 (1968).
88. 88. Yu. N. Shevchenko, S. V. Novikov, V. A. Merzlyakov, V. I. Gololobov, and A. Z. Galishin, "Thermoelastoplastic stress-strain analysis of cylindrical pipes with corrugated joints," Prikl. Mekh., 27, No. 8, 59-68 (1991).
89. 89. Yu. N. Shevchenko and I. Yu. Pleshkanovskii, "Deformation kinetics of shells of revolution under disproportionate loading," Prikl. Mekh., 22, No. 7, 39-44 (1986).
90. 90. Yu. N. Shevchenko and I. V. Prokhorenko, "The elastoplastic stress state of shells of revolution under axisymmetric nonisothermal loading," in: Nonlinear Problems in Engineering Mechanics: Structural Optimization [in Russian], Kievskii Inzh.-Stroit. Inst., Kiev (1978), pp. 8-12.
91. 91. Yu. N. Shevchenko and I. V. Prokhorenko, The Theory of Elastoplastic Shells under Nonisothermal Loading, Vol. 3 of the five-volume series Methods of Shell Design [in Russian], Naukova Dumka, Kiev (1981).
92. 92. Yu. N. Shevchenko, I. V. Prokhorenko, and I. Yu. Pleshkanovskii, "Study of the thermoelastoplastic deformation of shells of revolution along arbitrary flat paths," Probl. Prochn., No. 12, 8-10 (1990).
93. 93. Yu. N. Shevchenko and V. G. Savchenko, Thermoviscoplasticity, Vol. 2 of the five-volume series Mechanics of Coupled Fields in Structural Elements [in Russian], Naukova Dumka, Kiev (1987).
94. 94. Yu. N. Shevchenko and R. G. Terekhov, "Application of flow theory to the thermostress analysis of disks," in: Thermal Stresses in Structural Elements [in Russian], Issue 8, 196-206 (1969).
95. 95. Yu. N. Shevchenko and R. G. Terekhov, Physical Thermoviscoplastic Equations [in Russian], Naukova Dumka, Kiev (1982).
96. 96. Yu. N. Shevchenko, I. S. Chernyshenko, V. A. Merzlyakov, A. Z. Galishin, V. A. Maksimyuk, S. V. Novikov, V. M. Pavlychko, I. Yu. Pleshkanovskii, and V. F. Godzula, "Plastichnost'-1 computer-aided system for elastoplastic stress analysis of shell structural elements on an EU computer," Probl. Prochn., No. 2, 90-96 (1993).
97. 97. M. E. Babeshko and I. V. Prokhorenko, "The thermoviscoelastoplastic axisymmetric stress-strain state of laminated flexible orthotropic shells," Int. Appl. Mech., 36, No. 8, 1088-1096 (2000).
98. 98. M. E. Babeshko and V. G. Savchenko, "Method of successive approximation in boundary-value problems of thermoplasticity," Int. Appl. Mech., 34, No. 3, 232-238 (1998).
99. 99. M. E. Babeshko and V. G. Savchenko, "Improving the convergence of the additional-strain method in thermoplasticity boundary problems with deformation along small-curvature trajectories," Int. Appl. Mech., 34, No. 8, 771-776 (1998).
100. 100. G. N. Brooks, "Elastic-plastic ring-loaded cylindrical shells," Trans. ASME, J. Appl. Mech., 55, No. 4, 761-766 (1988).
101. 101. V. Gamer, "Zum elastisch-plastischen Hohlzylinder unter Innendruck," ZAMM, 68, No. 1, 47-50 (1988).
102. 102. Ph. G. Hodge and S. V. Nardo, "Carrying capacity of an elastic-plastic cylindrical shell with linear strain-hardening," J. Appl. Mech., 25, No. 1, 79-85 (1958).
103. 103. S. Karadeniz, A. R. S. Ponter, and K. F. Carter, "The plastic ratcheting of thin cylindrical shells subjected to axisymmetric thermal and mechanical loading," Trans. ASME, J. Pressure Vessel Technol., 109, No. 4, 387-393 (1987).
104. 104. V. A. Merzlyakov and Yu. N. Shevchenko, "Elastoplastic deformation of shells of revolution under nonaxisymmetric loading (review)," Int. Appl. Mech., 35, No. 5, 431-461 (1999).
105. 105. M. Rogozinski, "Some problems of thermoplasticity of a spherical shell," in: Nonhomogeneity in Elasticity and Plasticity, Pergamon Press, London (1959), pp. 215-226.
106. 106. V. G. Savchenko and M. E. Babeshko, "Solution of nonaxisymmetric three-dimensional thermoplasticity problem by the secondary-stress method," Int. Appl. Mech., 35, No 12, 1207-1213 (1999).
107. 107. V. G. Savchenko and M. E. Babeshko, "The elastoplastic axisymmetric stress-strain state of flexible laminated shells exposed to radiation," Int. Appl. Mech., 36, No. 9, 1218-1224 (2000).
108. 108. Yu. N. Shevchenko and M. E. Babeshko, "Method of approximately describing the lag of scalar properties of isotropic materials," Int. Appl. Mech., 35, No. 7, 671-677 (1999).
109. 109. T. Shigeo, T. Katsumy, and T. Kiyoyoky, "Elasto/visco-plastic deformation of multi-layered moderately thick shells of revolution," JSME. Int. J., Ser. 1, 34, No.1, 13-22 (1991).