Optics and optoelectronics: FEM and BEM analyses A bibliography (1998-1999)

Finite Elements in Analysis and Design

Volumn 37, Issue 6-7, 2001, Pages 575-585

  Mackerle, Jaroslav ^a  

^a LINKÖPING INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0035366891     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0168-874X(00)00058-5     Document Type: Short Survey

References (234)

1. Measurement and analysis of impact-induced strain using extrinsic Fabry-Perot fiber optic sensors
2. Computer modeling of optical dielectric waveguides by edge infinite elements
3. Full wave analysis of dielectric optical waveguides by vectorial finite elements and absorbing boundary condition
4. Temperature determination in optoelectronic waveguide modulators
5. Thermal-stress-induced birefringence in panda and bow-tie optical fibers
6. Design considerations for an electrooptic directional coupler modulator
7. Resonance conditions of long-period gratings in temperature sensitive polymer ring optical fibers
8. Finite element analysis of nonreciprocal phase shift for TE modes in magnetooptic rib waveguides with a compensation wall
9. Computer-generated holograms for beam-shaping: Design methods and experimental results
10. Numerical modeling of a fiber-optic phase modulator using piezoelectric polymer coating
11. Polymer coated D-fiber intended for electric field sensing
12. Finite element analysis of an optical electric field sensor using piezoelectric polymer coating
13. Optical response of an all-fibre acoustooptic phase modulator using aluminium nitride coating
14. Upgrade of intermediate focal length optical tracking systems (IFLOTS)
15. Numerical modelling of arc attachment to cathodes of high-intensity discharge lamps
16. Preliminary design of the cavity end deformable mirror of the megajoule laser
17. Complete analysis of the characteristics of propagation into photonic crystal fibers by the finite element method
18. Soliton train generation in a dual channel mode-locked fiber laser
19. Efficient single-mode GaAs/AlGaAs W waveguide phase modulator with a low propagation loss
20. Experimental and numerical investigation on structural effects of laser pulses for modal parameter measurement
21. Thermally induced shifts in an optical fiber soldered into a ferrule
22. Thermal stresses in box-type laser packages
23. Reduction of fiber alignment shifts in semiconductor laser module packaging
24. Modelling the photoresponse characteristics of InP/InGaAs heterojunction phototransistor with different incident directions of beam light
25. 3) channel optical waveguide amplifiers for WDM systems
26. 3+-doped channel optical waveguide amplifiers for WDM systems: A comparison of tellurite, alumina and Al/P silicate materials
27. Analysis of optical fibers with graded-index profile by a combination of modified Airy functions and WKB solutions
28. General eigenvalue equations for optical planar waveguides with arbitrarily graded-index profiles
29. Pressure sensitivity of side-hole optical fiber sensors
30. Recent developments in the use of plastic optical fiber for an embedded wear sensor
31. Non uniform multiresolution method for optical flow and phase portrait models: Environmental applications
32. 2 overlay
33. Finite element analysis of the open window plastic package for optical sensors
34. Stress analysis for the optimization of a new plastic package for optical sensors
35. Vectorial electromagnetic modes in V-shaped dielectric waveguides with application to quantum wire devices
36. Nonlinear finite element semivectorial propagation method for three-dimensional optical waveguides
37. Active nonlinear integrated optical devices: A numerical analysis
38. Perfectly matched anisotropic layers for optical waveguide analysis through the finite element beam propagation method
39. Modelling of titanium indiffused lithium niobate optical waveguide by variational method
40. Analysis of optical waveguides using the two-dimensional integral equations
41. Theoretical and experimental study of nematic liquid crystal display cells using the in-plane-switching mode
42. The mechanical load transfer into a distributed optical fiber sensor due to a linear strain gradient: Embedded and surface bonded cases
43. 1-D and 2-D photonic bandgap microstrip structures
44. Transfer function analysis of diffused planar optical waveguide
45. Modelling of high pressure discharge lamps including electrodes
46. Structural health monitoring of filament wound composite pressure vessels with embedded optical fiber sensors
47. Embedded fiber optic sensor arrays for structural health monitoring of filament wound composite pressure vessels
48. On the computation of eigenmodes of integrated optical components
49. Ultimate low threshold and high efficiency calculated for GaInAsP microdisk injection lasers with optimum posts
50. Simulation of grating light valves
51. Surface integral method to determine guided modes in uniaxially anisotropic embedded waveguides
52. Generation and reception of ultrasonic guided waves in composite plates using conformable piezoelectric transmitters and optical fiber detectors
53. Using fiber-optic sensors to measure strain in motor stator end windings during operation
54. Thermal effects in pulsed laser assisted scanning tunneling microscopy
55. Wideband optical waveguides with arbitrary index profile: Propagation solution by quadratic finite element approach
56. Thermal modeling of laser capture microdissection
57. Effects of internal stresses on the precision of moveable structures for optical MEMS
58. Influence of energy transfer upconversion on thermal lensing in end-pumped Nd:YLF and Nd:YAG lasers
59. Take off measurement of pico sliders on laser zone textured media
60. Stroboscopic phase-shifting interferometry for dynamic characterization of optical MEMS
61. 3/Pt-sensors based on photothermal characterization
62. Combination of beam propagation method and model expansion propagating method for bidirectional optical beam propagation analysis
63. A time domain beam propagation method based on a finite element scheme
64. A time domain beam propagation method based on a finite element scheme
65. Thermal modeling of grooved phase change optical recording disk
66. Three-dimensional thermal modeling and analysis of near-field phase change optical disks
67. Sidemode suppression of optical add-and-drop multiplexer utilizing vertically coupled InGaAsP waveguides
68. 3 optical modulator
69. Resonant modes of two-dimensional photonic bandgap cavities determined by the finite element method and by use of the anisotropic layer boundary
70. Location of embedded fiber optic sensors for minimized impact vulnerability
71. Progress towards an orthogonal strain state sensor based optical fiber technology
72. Heat transfer analysis and modeling of a cryogenic laser radiometer
73. Avectorial finite element method for 2-D cross sectional optical waveguides using two transverse components of magnetic vectorial wave equations
74. Bidirectional finite element method-of-line beam propagation method (FE-MOL-BPM) for analyzing optical waveguides with discontinuities
75. Proposal of the accurate semi-vectorial finite element method (SV-FEM) for the 2-D cross-sectional optical waveguide analysis
76. Birefringence free planar optical waveguide made by flame hydrolysis deposition (FHD) through tailoring of the overcladding
77. Polarimetric pulse propagation through discrete random media
78. Analysis of graded-index optical fibers by the rigorous WKB
79. Analysis of shadow mask thermal deformation and prediction of beam landing shifts for color CRT
80. Dynamic characteristics of disk vibration and rotating airflow in magneto optical drive
81. Simulation of DWDM components
82. Stable discrete domain walls and quasi-rectangular solitons in quadratically nonlinear waveguide arrays
83. Implementation of micromirror arrays as optical binary switches and amplitude modulators
84. Device and packaging considerations for MMIC-based millimeter-wave quasi-optical amplifier arrays
85. Beam propagation method based on finite element scheme and its application to optical waveguide analysis
86. Design and modeling of microwave photonic devices
87. Finite element modeling of broad-band travelling-wave optical modulators
88. Time-domain beam propagation method and its application to photonic crystal circuits
89. Utilisation of optical fibre measurement techniques in determination of residual stresses of composites
90. A fiber optic sensor to transverse strain measurement
91. x/Si heterostructures
92. Computer-aided analysis and design of optical structures based on novel directional couplers
93. Simulation of the parameters for an optical system with coaxial radial thermal gradient
94. Analysis of fiber-optic connector parameters through finite element modeling
95. A fused taper-type optical fiber mode converter
96. Design theory and fabrication of a new fused-taper optical fiber mode converter
97. Numerical calculation of field distribution of confocal spherical resonator by the finite element method
98. Optical fiber sensors for studying drag forces of the molding flow in IC packaging
99. Wave-matching of integrated optical coupler structures
100. Efficient stationary model for erbium-doped optical amplifiers: Numerical and experimental comparisons
101. Numerical modeling of multimode doped optical waveguides
102. Finite element method in thermal deformation analysis of high power laser windows
103. Accurate three-dimensional modal solutions for optical resonators with periodic layered structure by using the finite element method
104. Optical dielectric waveguide analysis, based on the modified finite element and integral equation methods
105. A study of the displacement field around embedded fibre optic sensors
106. Improved semivectorial beam propagation method using a finite element scheme
107. Semi-vectorial finite element method for arbitrary step-index optical waveguides
108. Analyzing the polarization dependence in optical spot-size converter by using a semivectorial finite element beam propagation method
109. Modeling of InAs/GaInSb/AlSb Type-II Mid-IR interband cascade lasers
110. Modelling of 3D micromachined cantilevers manufacturing for optical detection
111. InGaP/GaAs based heterojunction transistor characterisation using non-contact optical spectroscopy
112. Development of high density perpendicular magnetic recording system using a probe head of sharpened optical fiber
113. Three-dimensional beam propagation analysis of nonlinear optical fibers and optical logic gates
114. Comparison of optical analysis methods for oxide-apertured VCSELS
115. New full-vectorial numerically efficient propagation algorithm based on the finite element method
116. Theoretical analysis of optically addressed spatial light modulator with electromagnetic driven micromirror for optical information processing
117. 2 lasers
118. Development of an all solid state picosecond light source for photocathode RF gun
119. 3+/:LiYF4 lasers
120. 4
121. Thermal lensing in end-pumped Nd:YAG under lasing and nonlasing conditions
122. Design and application of subwavelength diffractive lenses for integration with infrared photodetectors
123. Hybrid scalar-vector method for the analysis of electrically large finite aperiodic diffractive optical elements
124. Modelling of quasi-optical arrays
125. Emitter failure and thermal facet load in high-power laser diode arrays
126. Transient thermal behavior of high power diode laser arrays
127. Rigorous characterization of photonic devices using the finite element method
128. Accurate characterization of in-fiber grating devices
129. Modelling of axially non-uniform photonic devices using finite element base vectorial BPM
130. Finite element modelling of photonic devices
131. Spot size expansion for improved OEIC-to-fibre coupling using directional couplers with 2D confinement
132. Numerical study of spot-size expanders for an efficient OEIC to SMF coupling
133. A rigorous comparison of the performance of directional couplers with multimode interference devices
134. Rigorous study of leaky modes in optical waveguides
135. Numerical modelling of passive duplexers using the finite element method
136. Design and characterization of spot-size expanders for improved laser-fiber coupling
137. Wave function engineering of antimonide quantum-well lasers
138. Quantitative characterization of 96.5Sn3.5Ag and 80Au20Sn optical fiber solder bond joints on silicon micro-optical bench substrates
139. Electrical cross-talk modelling in optoelectronic integrated transceivers
140. Self-adaptive resonators
141. Active quasi-optics
142. Stress analysis method for elastically anisotropic material based optical waveguides and its application to strain-induced optical waveguides
143. Stress analysis method for optical waveguides composed of elastically anisotropic materials and its application to strain-induced waveguides
144. Numerical analysis of integrated acoustooptic tunable filters with weighted coupling
145. Numerical analysis of integrated acoustooptic tunable filters with weighted coupling
146. Stress analysis method considering piezoelectric effects and its application to static strain optic devices
147. Temperature-dependent performance of 1.55 micro M vertical cavity lasers with InGaAsP/InP bottom mirrors
148. Observation and modelling of laser peening phenomenon
149. Ground strain measuring system using optical fiber sensors
150. Modeling of thermal birefringence in longitudinal diode-pumped Nd:YAG laser systems
151. New diode pumped multi kW solid state laser-modeling of the performance in comparison with experimental results
152. Mixed finite element beam propagation method
153. A versatile opto-electronic probe for high-voltage pulsed applications
154. Rib waveguide spot-size transformers: Modal properties
155. Finite element analysis of thermal stresses in laser packaging
156. Near-field analysis of micro-aperture surface emitting laser for high density optical data storage
157. Micro-aperture surface emitting laser for near field optical data storage
158. Efficient waveform recall in absorbing media
159. Combined molecular dynamics and finite element method technique applied to laser induced pressure wave propagation
160. Fermi-level pinning in GaInP/AlGaInP laser diodes
161. Numerical study of effects of the beam tube on laser fields with a three-dimensional simulation code using the finite element method
162. New true fourth-order accurate scalar beam propagation methods for both TE and TM polarization
163. Experimental and analytical characterization of the mechanical performance of disks
164. Dispersion characteristics of an optical fiber having linear chirp refractive index profile
165. Efficient finite element analysis of tilted open anisotropic optical channel waveguides
166. Design methods for illumination light pipes
167. Wfiber with rectangular central dip: Optimization based field diameters
168. Accurate solutions for sub-micron metal-clad optical fibers for optical scanning microscopes
169. Gain/loss characterization of optical waveguide and semiconductor laser structures
170. TM/TE modal solutions for submicron lossy metal-clad optical fibres
171. Laser probing and FEM modeling of ultrasonically vibrating surfaces
172. Laser probing and FEM modeling of solidly mounted resonators
173. Heating of high-power laser diode arrays: From temperature data to power management and failure mechanisms
174. Numerical modeling of long-wavelength vertical-cavity surface-emitting semiconductor lasers II - Transient thermal modeling
175. Finite element beam propagation method with perfectly matched layer boundary conditions for three-dimensional optical waveguides
176. Noniterative beam propagation method for optical grating waveguides
177. Guided-mode and leaky-mode analysis by imaginary distance beam propagation method based on finite element scheme
178. Finite element beam propagation method for anisotropic optical waveguides
179. Finite element based Kerr electro-optic reconstruction of space charge
180. New reconstruction algorithm for Kerr electro-optic measurement of space charge in arbitrary geometries
181. Dispersive properties of Kerr-like nonlinear optical structures
182. Mid-IR vertical cavity surface emitting lasers
183. Interband cascade and Type-II superlattice mid-infrared lasers
184. Post-weld-shift in semiconductor laser packaging
185. 2 laser waveguide with two curved surfaces
186. Elliptical Fourier series expansion method together with cutoff frequencies in elliptical optical waveguides
187. Cooling schemes for longitudinally diode laser-pumped Nd: YAG rods
188. Thermal effects in solid-state laser materials
189. Design, simulation and technological realization of a reliable packaging concept for high power laser bars
190. Modelling of arc-electrode systems-preliminary results for high pressure xenon arc lamps
191. Spatial hole burning effect in gain-guided vertical cavity surface-emitting lasers
192. Prototype of the side hole HB optical fiber
193. 3 electro-optic modulators with novel complex electrode
194. 2 laser processing
195. Electrooptic mapping and finite element modeling of the near-field pattern of a microstrip patch antenna
196. Design and simulation of polymer thermo-optic waveguide switches
197. A wide-angle finite element beam propagation method with perfectly matched layers for nonlinear optical waveguides
198. Finite element beam propagation method for nonlinear optical waveguides
199. A wide-angle finite element beam propagation method with perfectly matched layers for nonlinear optical waveguides
200. Electrooptic phase modulators using W-type PPpinNN AlGaAs rib waveguides with a low switching voltage and a low propagation loss
201. State reduction of recursive median filters
202. Combined beam propagation and finite element method for bidirectional optical beam propagation analysis
203. Combined beam propagation and finite element method for bidirectional optical beam propagation analysis
204. Combination of beam propagation method and finite element method for optical beam propagation analysis
205. Performance capacity of a simulated annealing bipolar composite filter (SABCF)
206. Review of numerical and approximate methods for the modal analysis of general optical dielectric waveguides
207. An overview of the finite element method in optical systems
208. Review of finite element methods for the analysis of optical and microwave dielectric waveguides
209. A review on the characterization of photonic devices using the finite element method
210. Review of finite element methods for microwave and optical waveguides
211. Computation of light scattering by axisymmetric nonspherical particles and comparison with experimental results
212. Comparison of FDM, FEM and BEM for electrostatic charged particle optics
213. 3D FDTD analysis of light beam scattering from a phase-change optical disk structure
214. Calculation of the temperature distribution on laser-illuminated scanning probe tips
215. Electric stresses in three-core cables equipped with optical fiber sensors
216. FDTD analysis of three-dimensional light beam scattering from the magneto-optical disk structure
217. Field enhancement of optical radiation in the nearfield of scanning probe microscope tips
218. FDTD analysis of light scattering characteristic from the magneto-optical disk medium
219. Analysis of beam wave scattering by recording marks on phase-change optical disk using boundary element method with finite element method
220. Design and application of subwavelength diffractive lenses for integration with infrared photodetectors
221. Vector-based synthesis of finite aperiodic subwavelength diffractive optical elements
222. Field stitching algorithm for the analysis of electrically large diffractive optical elements
223. Application of boundary element method to optical integrated circuits
224. Boundary integral equations for a two-dimensional simulator of a photon scanning tunneling microscope
225. Simulations of two-dimensional photon scanning tunneling microscope by boundary integral equation method: P-polarization
226. Boundary integral equations for computer-aided design and simulations of near-field optics: Two-dimensional optical manipulator
227. Simulation of near field optical manipulator by boundary element method aperture probe coated with metal
228. Numerical analysis of quasi-optical mode converters. 2- Analysis of azimuthal waveguide deformations using the boundary element method
229. Rigorous analysis of coupling between laser and passive waveguide in multilayer slab waveguide
230. Regular boundary integral formulation for the analysis of open dielectric/optical waveguides
231. Analysis of light beam scattering and detected signal characteristics from three-dimensional pit models of optical discs by the BEM
232. Full modes analysis of rectangular optical waveguide using new boundary element method
233. Scattered near-field and induced current on a beam wave by pits on optical disks using boundary element analysis