Behavioral trends of RC beams strengthened with externally bonded FRP

Journal of Composites for Construction

Volumn 5, Issue 2, 2001, Pages 102-103

  Bonacci, J F ^a   Maalej, M ^b  

^a UNIVERSITY OF TORONTO   (Canada)

^b NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

[No Author keywords available]

Indexed keywords

BENDING STRENGTH; DEFLECTION (STRUCTURES); FAILURE ANALYSIS; FIBER REINFORCED PLASTICS; FORMABILITY; PERFORMANCE; REINFORCED CONCRETE;

DEFLECTION CAPACITY; EXTERNALLY BONDED FIBER REINFORCED POLYMERS; REINFORCED CONCRETE BEAMS; STRENGTH GAIN;

CONCRETE BEAMS AND GIRDERS;

EID: 0035338221     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1090-0268(2001)5:2(102)     Document Type: Article

References (33)

1. ACI Committee 318. (1995). Building code requirements for structural concrete, American Concrete Institute, Detroit.
2. ACI Committee 440-F. (1999). "Guidelines for selection, design and installation of fiber reinforced polymer (FRP) systems for externally strengthening concrete structures." ACI Committee 440-F Draft Document, American Concrete Institute, Detroit.
3. Arduini, M., and Nanni, A. (1997). "Behavior of precracked RC beams strengthened with carbon FRP sheets." J. Compos. for Constr., ASCE, 1(2), 63-70.
4. Blaschko, M., Niedermeier, R., and Zilch, K. (1998). "Bond failure modes of flexural members strengthened with FRP." Proc., 2nd Int. Conf. on Compos. in Infrastruct., Tucson, Ariz., 1, 315-327.
5. Bonacci, J. F., and Maalej, M. (2000). "Externally-bonded FRP for rehabilitation of corrosion-damaged concrete beams." ACI Struct. J., 97(5), 703-711.
6. Brosens, K., and Van Gemert, D. (1997). "Anchoring stresses between concrete and carbon fibre reinforced laminates." Proc., 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Struct., Japan, 1, 271-278.
7. Chaalal, O., Nollet, M. J., and Perraton, D. (1998). "Strengthening of reinforced concrete beams with externally bonded fiber-reinforced plastic plates: design guidelines for shear and flexure." Can. J. Civ. Engrg., Ottawa, 25, 692-704.
8. Chaallal, O., Nollet, M. J., and Perraton, D. (1997). "Experimental investigation of RC beams strengthened in flexure with externally-bonded CFRP strips." Proc., 1997 Ann. Conf., Sherbrooke, Canada, 6, 21-30.
9. Crasto, A. S., Kim, R. Y., and Mistretta, J. P. (1996). "Rehabilitation of concrete bridge beams with externally-bonded composites plates. Part II." Proc., 41st Int. SAMPE Symp. and Exhibition, G. Schmitt et al., eds., Anaheim, Calif., 1269-1279.
10. Deblois, M., Picard, A., and Beaulieu, D. (1992). "Renforcement de poutres en béton armé à l'aide de matériaux composites: études théorique at expérimentale." Proc., 1st Int. Conf. on Advanced Compos. Mat. in Bridges and Struct, Canadian Society for Civil Engineering, Ottawa, 205-275 (in French).
11. Djelal, C., David, E., and Buyle-Bodin, F. (1996). "Utilisation de plaques en composite pour la reparation de poutres en beton arme endommagees." Proc., 2nd Int. Conf. on Advanced Compos. Mat. in Bridges and Struct. M. El-Badry, ed., Canadian Society for Civil Engineering, Ottawa, 581-588.
12. Hefferman, P. J., and Erki, M, A. (1996). "Equivalent Capacity and efficiency of reinforced concrete beams strengthened with carbon fiber reinforced plastic sheets." Can. J. Civ. Engrg., Ottawa, 23, 21-29.
13. Hognestad, E. (1951). "A study of combined bending and axial load in reinforced concrete members." Bull. Series No. 399, University of Illinois Engineering Experimental Station, Urbana, Ill.
14. Hutchinson, A. R., and Rahimi, H. (1996). "Flexural strengthening of concrete beams with externally-bonded FRP reinforcement." Proc., 2nd Int. Conf. on Advanced Compos. Mat. in Bridges and Struct., M. El-Badry, ed., Canadian Society for Civil Engineering, Ottawa, 519-526.
15. "JSCE Committee on Externally Bonded FRP." FRP Int., 7(1), 7.
16. M'Bazaa, I. (1995). "Renforcement en flexion de poutres en béton armé à aide de lamelles en matériaux composites: optimisation de la longeur des lamelles." Mémoire de Maîtrise ès Sciences Appliquées, University of Sherbrooke, Sherbrooke, U.K.
17. Maeda, T., Asano, Y., Sato, Y., Ueda, T., and Kakuta, Y. (1997). "A study on bond mechanism of carbon fiber sheet." Proc., 3rd Int. Symp. on Non-Metallic (FRP) Reinforcement for Concrete Struct., Japan, 1, 279-286.
18. Malek, A. M., Saadatmanesh, H., and Ehsani, M. R. (1998). "Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end." ACI Struct. J., 95(1), 142-152.
19. McKenna, J. K. (1993). "Post strengthening of reinforced concrete members using fiber composite materials." MS thesis, Dept. of Civ. Engrg., Royal Military College of Canada, Kingtston, Canada.
20. Meier, U., and Kaiser, H. (1991). "Strengthening of structures with CFRP laminates." Proc., Specialty Conf. on Advanced Compos. Mat., ASCE, New York, 224-232.
21. Missihoun, M. (1995). "Reinforcement en flexion de poutres en béton armé à l'orientation des fibres." Mémoire de Maîtrise es Sciences appliquées, University of Sherbrooke, Sherbrooke, U.K.
22. Mukhopadhyaya, P., Swamy, N., and Lynsdale, C. (1998). "Optimizing structural response of beams strengthened with GFRP plates." J. Compos, for Constr., ASCE, 2(2), 87-95.
23. Norris, T., Saadatmanesh, H., and Ehsani, M. (1997). "Shear and flexural strengthening of R/C beams with carbon fiber sheets." J. Constr. Engrg., ASCE, 123(7), 903-911.
24. Ritchie, P. A., Thomas, D. A., Lu, L. W., and Connelly, G. M. (1991). "External reinforcement of concrete beams using fiber reinforced plastic." ACI Struct. J., 88(4), 490-500.
25. Roberts, T. M. (1989). "Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated beams." The Struct. Engr., London, 67(12-20), 229-233.
26. Saadatmanesh, H., and Ehsani, M. (1990). "Fiber composite plates can strengthen beams." Concrete Int.: Des. and Constr., 12(3), 65-71.
27. Saadatmanesh, H., and Ehsani, M. (1991). "RC beams strengthened with GFRP plates. I: Experimental study." J. Struct. Engrg., ASCE, 117(11), 3417-3433.
28. Shahawy, M. A., and Beitelman, T. (1996). "Flexural behavior of reinforced concrete beams strengthened with advanced composite materials." Proc., 41st Int. SAMPE Symp. and Exhibition, G. Schmitt et al., eds., Anaheim, Calif., 1015-1025.
29. Sharif, A., Al-Sulaimani, G. J., Basunbul, I. A., Baluch, M. H., and Ghaleb, B. N. (1994). "Strengthening of initially loaded reinforced concrete beams using FRP plates." ACI Struct. J., 91(2), 160-168.
30. Spadea, G., Bencardino, F., and Swamy, R. N. (1998). "Structural behavior of composite RC beams with externally bonded CFRP." J. Compos. for Constr., ASCE, 2(3), 132-137.
31. Triantafillou, R. C., and Plevris, N. (1992). "Strengthening of RC beams with epoxy-bonded fiber-composite materials." Mat. and Struct., 25, 201-211.
32. Triantafillou, T. C. (1998). "Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites." ACI Struct. J., 95(2), 107-115.
33. Vafastehpour, H., and Mamelin, P. (1996). "Experimental study of RC beams strengthened with CFRP plate." Proc., 2nd Int. Conf. on Advanced Compos. Mat. in Bridges and Struct., M. El-Gadry, ed., Canadian Society for Civil Engineering, Ottawa, 555-563.