Optimization and process control for high performance thermal spray coatings

Key Engineering Materials

Volumn 197, Issue , 2001, Pages 27-57

  Moreau, Christian ^a   Leblanc, Luc ^a,b  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^b PyroGenesis Inc   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

DEPOSITION; MICROSTRUCTURE; OPTIMIZATION; PARTICLE SIZE ANALYSIS; PARTICLES (PARTICULATE MATTER); PLASMA SPRAYING; PROCESS CONTROL; SOLIDIFICATION; STRUCTURE (COMPOSITION); TEMPERATURE CONTROL; THERMAL BARRIER COATINGS; VELOCITY CONTROL;

HIGH VELOCITY OXYGEN FUEL PROCESS; MOLTEN PARTICLES SPREADING; THERMAL SPRAY COATINGS; WEAR RESISTANT COATINGS;

SPRAYED COATINGS;

EID: 0035082378     PISSN: 10139826     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (69)

1. N. Czech: Thermal Spray Coatings '97, Conf. Proc. Atlanta, USA, April 1997 (Groham Advanced Materials, Inc., USA 1997).
2. Z., Mutasim and W. Brentnall: Thermal Barrier Coatings, Workshop Cleveland, USA, March 1995 (NASA Lewis Research Center, USA 1995), pp. 103ff.
3. W.P., Parks, E.E. Huffman, W.Y. Lee and I.G. Wright: Thermal Barrier Coatings, Workshop Cleveland, USA, March 1995 (NASA Lewis Research Center, USA 1995), pp. 35ff.
4. P. Cheang and K.A. Khor: J. Therm. Spray Technol. Vol. 5 (1996), pp. 310ff.
5. L. Pawlowski: J. Therm. Spray Technol. Vol. 5 (1996), pp. 317ff.
6. R.C. McCune: Welding Journal Vol. August (1995), pp. 41ff.
7. G. Wuest, G. Barbezat and S. Keller: Applications for Aluminum in Vehicle Design, SP-1251, (SAE Special Publications, USA 1997), pp. 33ff.
8. V.D.N. Rao, D.M. Kabat, H.A. Cikanek, C.A. Fucinari and G. Wuest: Applications for Aluminum in Vehicle Design, SP-1251, (SAE Special Publications, USA 1997), pp. 107ff.
9. S. Sampath, H. Herman, N. Shimoda and T. Saito: MRS Bulletin Vol. 20, (1995), pp.27ff.
10. R.W. Smith: Review of Progress in Quantitative Nondestructive Evaluation, Vol 8B (Plenum Press, USA 1989), pp. 1169ff.
11. Fincke, J.R.: Thermal Spray: International Advances in Coatings Technology, Proc. Inter. Thermal Spray Conf., Orlando, USA 1992 (ASM International, USA 1992), pp. 1ff.
12. R. McPherson, Thin Solid Films Vol. 83 (1981), pp. 297ff.
13. A.C. Léger, M. Vardelle, A. Vardelle, and P. Fauchais: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 623ff.
14. M. Vardelle, A. Vardelle, P. Fauchais and C. Moreau: Meas. Sci. Technol. Vol. 5 (1994), pp.205ff.
15. C. Moreau, P. Cielo, M. Lamontagne, S. Dallaire and M. Vardelle: Meas. Sci. Technol. Vol. 1 (1990), pp. 807ff.
16. C. Moreau, P. Cielo and M. Lamontagne: J. Therm. Spray Technol. Vol. 1 (1992), pp. 317ff.
17. P. Fauchais, A. Vardelle and M. Vardelle: High Performance Ceramic Films and Coatings (Elsevier Science Pub., B.V. 1991), pp. 3ff.
18. A.R. Lopez, B. Hassan, W.L. Oberkampf, R.A. Neiser and T.J. Roemer: J. Thermal Spray Technol. Vol. 7 (1998), pp. 375ff.
19. W.L. Oberkampf and M. Talpallikar: J. Thermal Spray Technol. Vol. 5 (1996), pp. 53ff.
20. W.L. Oberkampf and M. Talpallikar: J. Thermal Spray Technol. Vol. 5 (1996), pp. 62ff.
21. P. Bengtsson and T. Johannesson: J. Therm. Spray Technol. Vol. 4 (1995), pp. 245ff.
22. R.G. Castro, A.H. Bartlett, K.E. Elliot and K.J. Hollis: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 735ff.
23. A. Haddadi, A. Grimaud, A. Denoirjean, F. Nardou and P. Fauchais: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 615ff.
24. M. Mellali, M. Vardelle, A. Grimaud and P. Fauchais: Thermal Spray 93, Proc. Conf. TS93, Aachen, Germany, March 1993 (DVS-Verlag GmbH, Germany 1993), pp. 152ff.
25. M. Mellali, P. Fauchais and A. Grimaud: VDI-Berichte NR.1166 (1995), pp. 387ff.
26. M. Mellali, P. Fauchais and A. Grimaud: Surf. Coat. Technol. Vol. 81 (1996), pp. 275ff.
27. S. Kuroda and S. Kitahara: Thermal Spraying - Current Status and Future Trends, Proc, Inter. Thermal Spray Conf., Kobe, Japan, May 1995 (High Temperature Society of Japan, Japan 1995), pp. 489ff.
28. P. Bergtsson, T. Jonannesson and J. Wigren: Thermal Spraying - Current Status and Future Trends, Proc, Inter. Thermal Spray Conf., Kobe, Japan, May 1995 (High Temperature Society of Japan, Japan 1995), pp. 513ff.
29. M. Viens, D. Drolet, A. Blouin, J.-P. Monchalin and C. Moreau: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 947ff.
30. st Century, Proc, Inter. Thermal Spray Conf., Nice, France, May 1998 (ASM international, USA 1998), pp. 1681ff.
31. L. Leblanc and C. Moreau: Thermal Spray Surface Engineering via Applied Research, Proc, Inter. Thermal Spray Conf., Montreal, Canada, May 2000 (ASM international, USA 2000), pp. 1233ff.
32. S.A. Wutzke, E. Pfender and E.R.G. Eckert: AIAA Vol. (6) 8 (1968), pp.1474ff.
33. J.-F. Coudert, M.P. Planche, P. Fauchais: Plasma Chem. and Plasma Proc. Vol 16, No. 1-Supplement (1996), pp. 211Sff.
34. J.-F Brilhac, B. Pateyron and P. Fauchais: ISPC 10 Bochum (1991).
35. J.-F Brilhac, B. Pateyron, J.-F. Coudert, P. Fauchais, P. Pasquini, A. Bouvier, L. Jestin: Jour, of High Temp. Chem. Proc. Vol. 1, No. 3-Supplement (1992)
36. J. Xi, G. Krishnappa, C. Moreau: Thermal Spray: A United Forum for Scientific and Technological Advance, Proc. United Thermal Spray Conf., Indianapolis, USA, September 1997 (ASM International, USA 1997), pp. 413ff.
37. Z. Duan, L. Beall, M.P. Planche, J. Heberlein, E. Pfender, M. Stachowicz: Thermal Spray: A United Forum for Scientific and Technological Advance, Proc. United Thermal Spray Conf., Indianapolis, USA (ASM International, USA 1997), pp. 407ff.
38. L. Leblanc, C. Moreau and P. Gougeon: Proc. United Thermal Spray Conf., Düsseldorf, Germany, March 1999 (DVS-Verlag GmbH, Germany 1999), pp. 306ff.
39. Z. Duan and J. Herberlein: Thermal Spray Surface Engineering via Applied Research, Proc, Inter. Thermal Spray Conf., Montreal, Canada, May 2000 (ASM international, USA 2000), pp. 1ff.
40. J.F. Coudert, M.P. Planche and P. Fauchais: High Temp. Chem. Processes Vol. 3 (1994), pp. 639ff.
41. J.F. Coudert and P. Fauchais: Annals New York Acad. Sciences, Vol. 891 (1999), pp. 382ff.
42. Tecnar Automation Ltd., 1321 Hocquart Street, St-Bruno (Quebec) J3V-6B5, Canada
43. C. Moreau, P. Gougeon, M. Lamontagne, V. Lacasse, G. Vaudreuil and P. Cielo: Thermal Spray Industrial Applications, Proc. National Thermal Spray Conf., Boston, SA, 1994 (ASM International, USA, 1994), pp.431ff.
44. P. Gougeon, C. Moreau, V. Lacasse, M. Lamontagne, I. Powell and A. Bewsher: Proc. Conf. on Powder Metallurgy and Particulate Materials Vol. 6, Toronto, Canada, 1994 (Metal Powder Industries Federation. 1994), pp. 199ff.
45. J. Blain, F. Nadeau, L. Pouliot, C. Moreau, P. Gougeon and L. Leblanc: Surface Engineering Vol. 13 (1997), pp. 420ff.
46. L. Leblanc, P. Gougeon and C. Moreau: Thermal Spray: A United Forum for Scientific and Technological Advance, Proc. United Thermal Spray Conf., Indianapolis, USA (ASM International, USA 1997), pp. 567ff.
47. L. Leblanc, C. Moreau, J.-G. Legoux, and B. Arsenault: Proc. United Thermal Spray Conf., Düsseldorf, Germany, March 1999 (DVS-Verlag GmbH, Germany 1999), pp. 329ff.
48. M. Prystay, P. Gougeon and C. Moreau: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 517ff.
49. M. Prystay, P. Gougeon and C. Moreau: Journal Thermal Spray Technol. in the press.
50. B. Dussoubs, G. Mariaux, A. Vardelle, M. Vardelle and P. Fauchais: High Temp. Material Processes, Vol. 3 (1999), pp.235ff.
51. J.H. Park, J. Heberlein, E. Pfender, Y.C. Lau, J. Ruud and H.P. Wang: Annals New York Acad, Sciences Vol 891 (1999), pp. 417ff.
52. B. Champagne and S. Dallaire: Thermal Spray: Advances in Coatings Technology, Proc. National Thermal Spray Conf., Orlando, USA, September 1987 (ASM International, USA 1988) pp. 25ff.
53. J. R. Fincke, W.D. Swank, D.C. Haggard, T.M. Demeny, S.M. Pandit and A.R. Kashani: Advances in Thermal Spray Science and Technology, Proc. National Thermal Spray Conf., Houston, USA, September 1995 (ASM International, USA 1995), pp. 117ff.
54. J. R. Fincke, W.D. Swank, D.C. Haggard, T.M. Demeny, S.M. Pandit and A.R. Kashani: Advances in Thermal Spray Science and Technology, Proc. National Thermal Spray Conf., Houston, USA, September 1995 (ASM International, USA 1995), pp. 123ff.
55. Surface Engineering Technology Group (SURFTEC), Progress Report #10, National Research Council Canada, Industrial Materials Institute, June 2000.
56. D. Bernard, M. Vardelle, A. Vardelle, and P. Fauchais: (French) Colloque de Physique, Colloque C5, supp. no. 18, Vol. 51 (1990) pp.331ff.
57. T. C. Nerz, J.E. Nerz, B.A. Kushner, A.J. Rotolico and W.L. Riggs: Thermal Spray: International Advances in Coatings Technology, Proc. Inter. Thermal Spray Conf., Orlando, USA 1992 (ASM International, USA 1992), pp. 405ff.
58. T. J. Steeper, D.J. Varacalle, G.G. Wilson, W.L. Riggs, A.J. Rotolico and J.E. Nerz: Thermal Spray: International Advances in Coatings Technology, Proc. Inter. Thermal Spray Conf., Orlando, USA 1992 (ASM International, USA 1992), pp. 415ff.
59. M. Dorfman and J. DeBarro: Thermal Spray: International Advances in Coatings Technology, Proc: Inter. Thermal Spray Conf., Orlando, USA 1992 (ASM International, USA 1992), pp. 439ff.
60. R.N. Wright, J.R. Fincke, W.D. Swank, and D.C. Haggard: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 511ff.
61. R.A. Neiser, and T.J. Roemer: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 285ff.
62. st Century, Proc, Inter. Thermal Spray Conf., Nice, France, May 1998 (ASM international, USA 1998), pp.785ff.
63. A.C. Leger, M. Vardelle, A. Vardelle P. Fauchais, S. Sampath, C.C. Berndt and H. Herman: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 623ff.
64. S. Sampath, J. Matejicek, C.C. Berndt, H. Herman, A.C. Leger, M. Vardelle, A. Vardelle and P. Fauchais: Thermal Spray: Practical Solutions for Engineering Problems, Proc. National Thermal Spray Conf., Cincinnati, USA, October 1996 (ASM International, USA 1996), pp. 629ff.
65. J.-G. Legoux, B. Arsenault, C. Moreau, V. Bouyer and L. Leblanc: Thermal Spray Surface Engineering via Applied Research, Proc, Inter. Thermal Spray Conf., Montreal, Canada, May 2000 (ASM international, USA 2000), pp. 479ff.
66. L. Jacobs, M.M. Hyland, J. Gutleber and S. Sampath: Proc. United Thermal Spray Conf., Düsseldorf, Germany, March 1999 (DVS-Verlag GmbH, Germany 1999), pp. 439ff.
67. P.A. Parrish: Intelligent Processing of Materials (The Minerals, Metals & Materials Society, USA 1990), pp. 3ff.
68. J. H. Taylor, P.K. Houpt, L.P. Harris, H.-P. Wang and E.S. Russell: Advanced Sensing, Modelling, and Control of Materials Processing (The Minerals, Metals & Materials Society 1992), pp. 275ff.
69. Y.C. Lau, C.A. Johonson, D.M. Gray, P. Houpt, M. Penny and H.P. Wang: Thermal Barrier Coating Workshop Cincinnati, USA, May 1997 (NASA Lewis Research Center, USA 1997) pp. 151ff.