The influence of stacking fault energy on the mechanical behavior of Cu and Cu-al alloys: Deformation twinning, work hardening, and dynamic recovery

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 32, Issue 1, 2001, Pages 135-145

  Rohatgi, Aashish ^a   Vecchio, Kenneth S ^b   Gray III, George T ^c  

^a Postgraduate Researcher   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; HARDENING; OPTICAL MICROSCOPY; SOLID SOLUTIONS; STACKING FAULTS; STRAIN RATE; TWINNING;

QUASI-STATIC COMPRESSION;

COPPER ALLOYS;

EID: 0035079261     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-001-0109-7     Document Type: Article

References (61)

1. A. Howie: in Direct Observations of Imperfections in Crystals, J.B. Newark and J.H. Wernick, eds., Interscience Publishers, New York, NY, 1961, pp. 283-94.
2. P.R. Swann: in The Impact of Transmission Electron Microscopy on Theories of the Strength of Crystals, G. Thomas and J. Washburn, eds., Interscience Publishers, New York, NY, 1961, pp. 131-79.
3. O. Johari and G. Thomas: Acta Metall., 1964, vol. 12, pp. 1153-59.
4. W.B. Jones and H.I. Dawson: in Metallurgical Effects at High Strain Rates, R.W. Rohde, B.M. Butcher, J.R. Holland, and C.H. Karnes, eds., Plenum Press, New York, NY, 1973, pp. 443-59.
5. F.I. Grace and M.C. Inman: Metallography, 1970, vol. 3, pp. 89-98.
6. J.A. Venables: in Deformation Twinning, R.E. Reed-Hill, J.P. Hirth, and H.C. Rogers, eds., Gordon and Breach Science Publishers, London, 1963, vol. 25, pp. 77-116.
7. C.S. Pande and P.M. Hazzledine: Phil. Mag., 1971, vol. 24, pp. 1393-1410.
8. C.S. Pande and P.M. Hazzledine: Phil. Mag., 1971, vol. 24, pp. 1039-57.
9. F.I. Grace, M.C. Inman, and L.E. Murr: Br. J. Appl. Phys., 1968, vol. 1, pp. 1437-43.
10. Z.S. Basinski, R.A. Foxall, and R. Pascual: Scripta Metall., 1972, vol. 6, pp. 807-14.
11. J. Vergnol and J.P. Villain: 5th Int. Conf. on the Strength of Metals and Alloys, P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon Press, Elmsford, NY, 1979, vol. 1, pp. 121-26.
12. H. Suzuki and E. Kuramoto: Int. Conf. on the Strength of Metals and Alloys; suppl. to Trans. Jpn. Inst. Met., 1967, pp. 697-702.
13. G.I. Shakhalova and A.I. Evplov: Strength Mater., 1992, vol. 24, pp. 469-71.
14. P.S. Follansbee: in Metallurgical Applications of Shock-Wave and High-Strain-Kate Phenomena, L.E. Murr, K.P. Staudhammer, and M.A. Meyers, eds., Marcel Dekker Inc., New York, NY, 1986, pp. 451-79.
15. M.Z. Butt: Phil. Mag. Lett., 1989, vol. 60, pp. 141-45.
16. V.Y. Panin, Y.F. Dudarev, and L.S. Bushnev: Phys. Met. Metallogr., 1966, vol. 21, pp. 73-80.
17. K. Nakanishi and H. Suzuki: Trans. Jpn. Inst. Met., 1974, vol. 15, pp. 435-40.
18. J.W. Steeds and P.M. Hazzledine: Disc. Faraday Soc., 1964, vol. 38, pp. 103-10
19. W.E. Nixon and J.W. Mitchell: Proc. R. Soc. London A, 1981, vol. 376, pp. 343-59.
20. L.E. Murr: Interfacial Phenomena in Metals and Alloys, Addison-Wesley Publishing Co., New York, NY, 1975, pp. 87-164.
21. D.T. Hawkins and R. Hultgren: in Metals Handbook-Metallography, Structures and Phase Diagrams, T. Lyman, ed., ASM, Metals Park, OH, 1973, vol. 8, p. 259.
22. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill Book Company, New York, NY, 1986, p. 135.
23. J. Friedel: in Dislocations and Mechanical Properties of Crystals, J.C. Fisher, W.G. Johnston, R. Thomson, and T. Vreeland, Jr., eds., John Wiley and Sons, Inc., Chapman and Hall, Ltd., New York, 1957, pp. 330-32.
24. J.P. Hirth and J. Lothe: Theory of Dislocations, McGraw-Hill, New York, NY, 1968, pp. 733-36.
25. G.T. Gray III: Symp. Modeling the Deformation of Crystalline Solids, T.C. Lowe, A.D. Rollett, P.S. Follansbee, and G.S. Daehn, eds., TMS, Warrendale, PA, 1991, pp. 145-58.
26. F.I. Grace: J. Appl. Phys., 1969, vol. 40, pp. 2649-53.
27. L.E. Murr: in Shock Waves and High Strain Rate Phenomena in Metals, M.A. Meyers and L.E. Murr, eds., Plenum Press, New York, NY, 1980, pp. 607-73.
28. M.A. Crimp, B.C. Smith, and D.E. Mikkola: Mater. Sci. Eng., 1987, vol. 96, pp. 27-40.
29. G.T. Gray III, P.S. Follansbee, and C.E. Frantz: Mater. Sci. Eng., 1989, vol. A111, pp. 9-16.
30. L. Remy: Acta Metall., 1978, vol. 26, pp. 443-51.
31. S. Asgari, E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1781-95.
32. O. Vohringer: Z. Metallk., 1976, vol. 67, pp. 518-24.
33. S. Mahajan: Phil. Mag., 1972, vol. 26, pp. 161-71.
34. T. Mori, H. Fujita, and S. Takemori: Phil. Mag. A, 1981, vol. 44, pp. 1277-86.
35. L. Rémy: Metall. Trans. A, 1981, vol. 12A, pp. 387-408.
36. D.R. Chichili, K.T. Ramesh, and K.J. Hemker: The Johannes Weertman Symp., R.J. Arsenault, D. Cole, T. Gross, G. Kostorz, P.K. Liaw, S. Parameswaran, and H. Sizek, eds., TMS, Warrendale, PA, 1996, pp. 437-48.
37. L.E. Murr, M.A. Meyers, C.-S. Niou, Y.J. Chen, S. Pappu, and C. Kennedy: Acta Mater., 1997, vol. 45, pp. 157-75.
38. F.J. Zerilli and R.W. Armstrong: in Shock Waves in Condensed Matter, S.C. Schmidt and N.C. Holmes, eds., North-Holland, Amsterdam, 1987, pp. 273-76.
39. G.T. Gray III: Symp. Twinning in Advanced Materials, M.H. Yoo and M. Wuttig, eds., TMS, Warrendale, PA, 1994, pp. 337-49.
40. U.R. de Andrade: Ph.D. Thesis, University of California, San Diego, CA, 1993,
41. S. Nemat-Nasser, J.B. Issacs, and J.E. Starrett: Proc. R. Soc. London A, 1991, vol. 435, pp. 371-91.
42. Annual Book of ASTM Standards, ASTM E112-88, ASTM, Philadelphia, PA, 1988, pp. 294-316.
43. W.J. Babyak and F.N. Rhines: Trans. TMS-AIME, 1960, vol. 218, pp. 21-23.
44. T. Kan and P. Haasen: Mater. Sci. Eng., 1969-70, vol. 5, pp. 176-78.
45. R. Labusch: Phys. Status Solidi, 1970, vol. 41, pp. 659-69.
46. P. Jax, P. Kratochvil, and P. Haasen: Acta Metall., 1970, vol. 18, pp. 237-45.
47. R. Labusch, G. Grange, J. Ahearn, and P. Haasen: in Rate Processes in Plastic Deformation of Materials, J.C.M. Li and A.K. Mukherjee, eds., ASM, Cleveland, OH, 1975, pp. 26-46.
48. B.C. Wonsiewicz and G.Y. Chin: Metall. Trans., 1970, vol. 1, pp. 2715-22.
49. N. Ono and S. Karashima: Scripta Metall., 1982, vol. 16, pp. 381-84.
50. D.J. Parry and A.G. Walker: in Mechanical Properties of Materials at High Rates of Strain, J. Harding, eds., Institute of Physics, Bristol, 1989, pp. 329-36.
51. R.J. De Angelis and J.B. Cohen: Trans. ASM, 1965, vol. 58, pp. 700-02.
52. M.G. Stout and U.F. Kocks: in Texture and Anisotropy, U.F. Kocks, C.N. Tomé, and H.-R. Wenk, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 420-65.
53. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76-85.
54. H. Mecking and Y. Estrin: in Constitutive Relations and Their Physical Basis, S.I. Andersen, J.B. Bilde-Sørensen, N. Hansen, T. Leffers, H. Lilholt, O.B. Pedersen, and B. Ralph, eds., Risø National Laboratory, Roskilde, Denmark, 1987, pp. 123-45.
55. P.S. Follansbee and U.F. Kocks: Acta Metall., 1988, vol. 36, pp. 81-93.
56. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865-75.
57. Y. Estrin and H. Mecking: Int. J. Plasticity, 1986, vol. 2, pp. 73-85.
58. Metals Handbook, 10th ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 2, pp. 216-345.
59. U.F. Kocks: in The Mechanics of Dislocations, ASM, Metals Park, OH, 1985, pp. 81-83.
60. U.F. Kocks: in Unified Constitutive Equations for Creep and Plasticity, A.K. Miller, ed., Elsevier, London, 1987, pp. 18-80.
61. D.H. Lassila: in Mechanical Properties of Materials at High Rates of Strain, J. Harding, ed., Institute of Physics, Bristol, 1989, pp. 323-27.