Mathematical modeling of high velocity oxygen fuel thermal spraying: an overview

Key Engineering Materials

Volumn 197, Issue , 2001, Pages 1-26

  Cheng, D ^a   Trapaga, G ^b   McKelliget, J W ^c   Lavernia, Enrique J ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b Massachusetts Institute of Technology Cambridge   (United States)

^c University of Massachusetts   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; GAS DYNAMICS; GAS FUELS; MATHEMATICAL MODELS; MECHANICAL PROPERTIES; MICROSTRUCTURE; PARTICLE SIZE ANALYSIS; PHYSICAL PROPERTIES; SPRAYED COATINGS;

COATING FORMATION; COATING PERFORMANCE; HIGH VELOCITY OXYGEN FUEL; PARTICLE DYNAMICS; PARTICLE IMPINGEMENT; THERMAL SPRAYING;

SPRAYING;

EID: 0035078929     PISSN: 10139826     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (74)

1. D. W. Parker, and G. L. Kutner: Adv. Mater. Process 140 (1991), p. 68.
2. B.H. Kear, and P. R. Strutt: Naval Res. Rev. 4 (1995), p. 4.
3. V. L. Tellkamp, M. L. Lau, A. Fabel, and E. J. Lavernia: NanoStructured Mater. 9 (1997), p. 489.
4. B. H. Kear, and G. Skandan: Nanostructured Mater. 7 (1996), p. 913.
5. H. G. Jiang, M. L. Lau and E. J. Lavernia: NanoStructured Mater. 10 (1998), p. 169.
6. M. L. Lau, V.V. Gupta and E. J. Lavernia: "Particle Behavior of Nanocrystalline 316-Stainless Steel during High Velocity Oxy-Fuel Thermal Spray", Proceedings of the Nano'98 Conference: The Fourth International Conference on Nanostructure Materials, June 14-19, 1998, Stockholm, Sweden.
7. M. L. Lau, V. V. Gupta and E. J. Lavernia: NanoStructured Mater. 10 (1998), p. 715.
8. V. L. Tellkamp, M. L. Lau, A. Fabel, and E. J. Lavernia: NanoStructured Mater. 9 (1997), p. 489.
9. E. J. Lavernia, M. L. Lau, and H. G. Jiang, "Thermal spraying processing of nanocrystalline materials", presented in NATO ASI Conference, 1997, St. Petersburg, Russia, 1997.
10. M. L. Lau, H. G. Jiang, W. Nuchter,and E. J. Lavernia, Solidi Status Physica 1998, p. 257.
11. N. Sinha, B. J. York, A. Hosangadi, and S. M. Dash: Proc. 8th National Thermal Spray Conference, 11-15 Sept., 1992, Houston, Texas, p. 199.
12. M. L. Thorpe, H. L. Richter: Proc. Inter. Thermal Spray Conf. & Exposition, Orlando, Florida, USA, 28 May-5 June, 1992, p. 137.
13. W. L. Oberkampf and M. Talpalikar: Thermal Spray Industrial Applications, Boston, MA, ASM International (1994), p. 381.
14. R. B. Heimann: Plasma-Spray Coating: Principles and Applications (VCH Verlagsgesellschaft mbh, 1996), p. 19.
15. D. J. Varacalle, M. G. Ortiz, C. S. Miller, T. J. Steeper, A. J. Rotolico, J. Nerz, and W. L. R. Riggs: Thermal Spray: International Advances in Coatings Technology, C. C. Berndt (ed.), ASM International, Materials Park, Ohio (1992), p. 181.
16. T. S. Srivatsan and E. J. Lavernia: J. Mater. Sci. 27 (1992). p. 5965.
17. D. Apelian, D. Wei, and B. Farouk: Metall. Trans. 20B (1989), p. 251.
18. K. A. Kowalsky, D. R. Marantz, M. F. Smith, and W. L. Oberkampf: Thermal Spray Research and Applications, Proc. 3rd National Thermal Spray Conference, Long Beach, CA, USA, 20-25 May 1990, p. 587.
19. H. K. Kim, B. L. Choi, and S. H. Hong: Proc. ITSC'95, May 1995, p. 435.
20. S. Fantassl, M. Vardelle, P. Fauchais and C. Moreau: Pro. ITSC'92, May, 1992, p. 755.
21. J. R. Fincke and W. D. Swank: Proc. 3rd NTSC'90, May 1990, p. 39.
22. S. Oki, S. Gohda, and K. Furukubo: Proc. ITSC'95, May 1995, p.39.
23. W. D. Swank, J. R. Fincke, D. C. Haggard, and G. Irons: Proc. 7th National Thermal Spray Conference, Boston, MA, 20-24 June 1994, p. 313.
24. W. L. Oberkampf and M. Talpallikar: J. Therm. Spray Technol. 5 (1996), p. 53.
25. B. Hassan, A. R. Lopez, and W. L. Oberkampf: J. Therm. Spray Technol. 7 (1998), p. 71.
26. S. Eidelman, X. Yang, I. Lottati, W. Grossmann: Proc. 8th National Thermal Spray Conference, Houston, Texas, 11-15 Sept. 1995, p. 219.
27. C. H. Chang and R. L. Moore: J. Therm. Spray Technol. 4 (1995), p. 358.
28. X. Yang and S. Eidelman: J. Therm. Spray Technol. 5 (1996), p. 175.
29. O. Knotek, and U. Schnaut: in Thermal Spray International Advances in Coatings Technology, C. C. Berndt (ed.), ASM International, Materials Park, Ohio (1992), p. 811.
30. M. L. Thorpe, and H. J. Richter: J. Therm. Spray Technol. 1 (1992), p. 161.
31. S. Gordon, and B. McBride, NASA SP-273, Lewis Research Center (1976).
32. V. V. Sobolev, J. M. Guilemany: Inter. Mater. Rev. 41 (1996), p. 13.
33. E. B. Smith, G. D. Power, T. J. Barber, and L. M. Chiappetta: Proc. of International Thermal Spraying Conference, Orlando, FL, 1992, p. 805.
34. B. E. Launder and D. B. Spalding: Lectures in Mathematical Models of Turbulence, Academic Press, London, New York, 1972.
35. B. E. Launder and D. B. Spalding: Comput. Meth. Appl. Mech. Eng. 3 (1974), p. 269.
36. W. L. Oberkampf and M. Talpallikar: J. Thermal Spray Technol. 5 (1996), p. 53.
37. P. L. Roe: Ann. Rev. Fluid Mech., 1986, p. 337.
38. H. C. Yee: J. Comput. Phy. 68 (1987), p. 151.
39. S. R. Chakravarthy and S. Osher: AIAA Paper 85-0363, 1985.
40. B. van Leer: J. Comput. Phys. 32 (1979), p. 101.
41. P. Colella and P. R. Woodward: J. Comput. Phy. 32 (1984), p. 174.
42. A. Harten and S. Osher: SIAM J. Numerical Analysis 24 (1987), p. 297.
43. N. Sinha, B. J. York, A. Hosangadi, and S. M. Dash: Proc. 8th National Thermal Spray Conference, 11-15 Sept., 1992, Houston, Texas, p. 199.
44. D. Cheng, Q. Xu, G. Trapaga, and E. J. Lavernia: "The Effect of Particle Size and Morphology on the In-flight Behavior of Particles During High Velocity Oxy-fuel (HVOF) Thermal Spraying", submitted to Metall. Mater. Trans. B, 2000.
45. G. D. Power, T. J. Barber, and L. M. Chiappetta: AIAA Paper No. 92-3598, July 1992.
46. D. Cheng, Q. Xu, G. Trapaga, and E. J. Lavernia: "A Numerical Study of the HVOF Process. Part I: Gas Phase Dynamics", submitted to Metall. Mater. Trans. A, 2000.
47. R. Ouziaux, and J. Perrier: Mecanique des fluides appliquée, Tome 2; Paris, Dunod (1967).
48. S. V. Joshi: Int. Powder Metall. 24 (1992), p. 373.
49. A. V. Voronetsky, D. A. Jagodnikov, L. A. Filimono, S. A. Suchkov, N. V. Shirjaeva, A. A. Elisseev, and E. V. Boronin: Proc. of 15th International Thermal Spray Conférence, 25-29 May 1998, Nice, France, p. 1393.
50. Y.-M. Yang, C. Coddet, and M. Imbert: Proc. 15th International Thermal Spray Conférence, 25-29 May 1998, Nice, France, p. 431.
51. D. Milojevic: Part. And Part. System Characterization 7 (1990), p. 181.
52. M. Sommerfeld: Int. J. Multiphase Flow 18 (1992), p. 905.
53. J. A. Lewis, and W. H. Gauvin: AIChE Journal 19 (1973), p. 982.
54. L. Pawlowski: The Science and Engineering of Thermal Spray Coatings (John Wiley & Sons, England, 1995).
55. R. Clift, J. R. Grace, and M. E. Weber: Bubbles, Drops and Particles (Academia Press, New York, 1978).
56. W. E. Ranz, and W. R. Marshall: Chem. Eng. Prog. 48 (1952), p. 141
57. M. C. Flemings: Solidification processing (New York, McGraw-Hill, 1974).
58. C. H. Chang and R. L. Moore: Proc. Proc. Of the 8th National Thermal Spray Conference, 11-15 Sept. 1995, Houston, Texas, p. 207.
59. A. R. Lopez, B. Hassan, W. L. Oberkampf, A. R. Neiser, and T. J. Roemer: Thermal Spray: Practical Solution for Engineering Problems, C. C. Berndt (Ed.), Published by ASM International, Materials Park, Ohio-USA, 1996, p. 531.
60. G. H. Ganser: Powder Technol. 77 (1993), p. 143.
61. F. H. Harlow and J. P. Shannon: J. Appl. Phys. 38 (1967), p. 3855.
62. J. E. Welch, F. H. Harlow, J. P. Shannon, and B. J. Daly: The MAC Method, LA-3425, UC-32, Mathematics and Computers, TID-4500, Los Alamos National Laboratory, New Mexico (1966).
63. M. Kitaura, M. Yao, J. Senda and H. Fujimoto: Proc. 13th Japanese Conf. On Atomization of Liquids (1984).
64. J. Madejski: Int. J. Heat Mass Transfer 19 (1976), p. 1009.
65. C. San Marchi, H. Liu, A. Sickinger, E. Muhlberger, E. J. Lavernia and R. H. Rangel: J. Mater. Sci. 28 (1993), p. 3313.
66. G. Trapaga and J. Szekely: Metall. Trans. 22B (1991), p. 901.
67. G. Trapaga, E. F. Matthys, J. J., Valencia and J. Szekely: Metall. Trans. 23 B (1992), p. 701.
68. S. Fantassi, M. Vardelle and P. Fauchais: Proc. 1993 National Thermal Spray Conf., Anaheim, Calif. (1993).
69. H. Liu, E. J. Lavernia, and R. H. Rangel: J. Phys. D: Appl. Phys. 26 (1993), p. 1900.
70. H. Liu, E. J. Lavernia, and R. H. Rangel: J. Thermal Spray Technol. 2 (1994), p. 369.
71. D. B. Kothe, R. C. Mjolsness and M. D. Torrey: RIPPLE: A Computer Program for Incompressible Flows with Free Surface, LA-12007-MS, UC-000, Los Alamos National Laboratory, New Mexico (1991).
72. H. Liu, E. J. Lavernia, and R. H. Rangel: Acta Metall. Mater. 43 (1995), p. 2053.
73. M. Bussmann, J. Mostaghimi, and S. Chandra: Phy. Fluids 11 (1999), p. 1406.
74. th International Thermal Spray Conference, 25-29 May 1998, Nice, France, p. 413.