SCOPUS 정보 검색 플랫폼

Volumn , Issue 1406, 2001, Pages 279-297

Three-dimensional analyses of crack-tip-opening angles and δ5-resistance curves for 2024-T351 aluminum alloy

(3) James, M A a Newman J C , Jr a Johnston W M , Jr a

a NASA LANGLEY RESEARCH CENTER (United States)

Author keywords

Cracks; CTOA; CTOD; Elastic plastic fracture; Resistance curve; 5

Indexed keywords

ALGORITHMS; COMPUTER SIMULATION; CRACK PROPAGATION; DYNAMIC LOADS; ELASTOPLASTICITY; FAILURE (MECHANICAL); FINITE ELEMENT METHOD; FRACTURE MECHANICS; FRACTURE TESTING; NUMERICAL ANALYSIS; STRESSES; TENSILE TESTING;

COMPACT TENSION; CRACK TIP OPENING ANGLES; FAILURE LOADS; MESH LOCKING; STRESS RATIO;

ALUMINUM ALLOYS;

EID: 0034800551 PISSN: 00660558 EISSN: None Source Type: Conference Proceeding
DOI: None Document Type: Article

Times cited : (27)

References (23)

1
- 0001432357
- Application of fracture mechanics at the beyond general yielding
- (1961) British Welding Journal , vol.11 , pp. 563-570
- Wells, A.A.¹

2
- 0027656644
- Three-dimensional elastic-plastic finite-element analyses of constraint variations in cracked bodies
- (1993) Engineering Fracture Mechanics , vol.46 , Issue.1 , pp. 1-13
- Newman J.C., Jr.¹ Bigelow, C.A.² Shivakumar, K.N.³

3
- 0029409235
- Variations of a global constraint factor in cracked bodies under tension and bending loads
- M. Kirk and A. Bakker, Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1995) ASTM STP 1244 , pp. 21-42
- Newman J.C., Jr.¹ Crews J.H., Jr.² Bigelow, C.A.³

4
- 0029489001
- Three-dimensional CTOA and constraint effects during stable tearing in thin sheet material
- W. G. Reuter, J. H. Underwood, and J. C. Newman, Jr., Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1995) ASTM STP 1256 , pp. 223-242
- Dawicke, D.S.¹ Newman J.C., Jr.² Bigelow, C.A.³

5
- 84920630496
- A fracture criterion for widespread cracking in thin sheet aluminum alloys
- Durability and Structural Integrity of Airframes, Vol. I, ICAF '93, 17th Symposium of the International Committee on Aeronautical Fatigue, Stockholm, Sweden, 9-11 June 1993
- Newman J.C., Jr.¹ Dawicke, D.S.² Sutton, M.A.³ Bigelow, C.A.⁴

6
- 0028755578
- CTOA and crack tunneling measurements in thin sheet 2024-T3 aluminum alloy
- (1994) Experimental Mechanics , vol.34 , Issue.4 , pp. 357
- Dawicke, D.S.¹ Sutton, M.A.²

7
- 0029542704
- Three-dimensional crack growth assessment by microtopographic examination
- W. G. Reuter, J. H. Underwood, and J. C. Newman, Jr., Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1995) ASTM STP 1256 , pp. 303-320
- Lloyd, W.R.¹ Piascik, R.S.²

8
- 84987548945
- Studies on crack initiation and stable crack growth
- J. D. Landes, J. A. Begley, and G. A. Clark, Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1979) Elastic-Plastic Fracture, ASTM STP 668 , pp. 65-120
- Shih, C.F.¹ DeLorenzi, G.H.² Andrews, W.R.³

9
- 85167448285
- Elastic-platic fracture mechanics for two dimensional stable crack growth and instability problems
- J. D. Landes, J. A. Begley, and G. A. Clark, Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1979) Elastic-Plastic Fracture, ASTM STP 668 , pp. 65-120
- Kanninen, M.F.¹ Rybicki, E.F.² Stonesifer, R.B.³ Broek, D.⁴ Rosenfield, A.R.⁵ Marschall, C.W.⁶ Hahn, G.T.⁷

10
- 0000347557
- An elastic-plastic finite-element analysis of the J-resistance curve using a CTOD criterion
- D. T. Read and R. P. Reed, Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1988) Fracture Mechanics: Eighteenth Symposium, ASTM STP 945 , pp. 665-685
- Newman J.C., Jr.¹ Booth, B.C.² Shivakumar, K.N.³

11
- 0003301950
- ZIP3D-An elastic and elastic-plastic finite-element analysis program for cracked bodies
- NASA Langley Research Center, Hampton, VA
- (1990) NASA TM 102753
- Shivakumar, K.N.¹ Newman J.C., Jr.²

12
- 0003259392
- Department of Civil Engineering, University of Illinois at Urbana-Champaign, Urbana, IL
- (1998) WARP3D-Release 10.8 Users Manual
- Koppenhoefer, K.C.¹ Gullerud, A.S.² Ruggieri, C.³ Dodds R.H., Jr.⁴

13
- 0032633134
- Three-dimensional modeling of ductile crack growth in thin sheet metals: Computational aspects and validation
- (1999) Engineering Fracture Mechanics , vol.63 , pp. 347-374
- Gullerud, A.S.¹ Dodds R.H., Jr.² Hampton, R.W.³ Dawicke, D.S.⁴

14
- 84980095732
- (1969) International Journal for Numerical Methods in Engineering , vol.1 , pp. 75-100
- Zienkiewicz, O.C.¹ Valliappan, S.² King, I.P.³

15
- 0019057349
- Generalization of selective integration procedures to anisotropic and nonlinear media
- (1980) International Journal for Numerical Methods in Engineering , vol.15 , pp. 1413-1421
- Hughes, T.J.¹

16
- 85167794287
- A finite-element analysis of fatigue crack closure
- American Society for Testing and Materials, West Conshohocken, PA
- (1976) Mechanics of Crack Growth, ASTM STP 590 , pp. 281-301
- Newman J.C., Jr.¹

17
- 0003413485
- Stable tearing behavior of a thin-sheet material with multiple cracks
- NASA TM 109131, 1994 NASA Langley Research Center, Hampton, VA
- Dawicke, D.S.¹ Newman J.C., Jr.² Sutton, M.A.³ Amstutz, B.E.⁴

18
- 0004122140
- Use of three-dimensional digital image correlation for the experimental characterization of buckling in large, thin, 2024-T3 aluminum, middle-crack tension specimens
- Ph.D. thesis, University of South Carolina, Columbia, SC
- (1999)
- Helm, J.D.¹

19
- 0001151793
- The Engineering Flaw Assessment Method (EFAM)
- (1998) Fatigue and Fracture of Engineering Materials and Structures , vol.21 , pp. 1203-1213
- Schwalbe, K.H.¹

20
- 0003192823
- R-curve testing and its relevance to structural assessment
- (1998) Fatigue and Fracture of Engineering Materials and Structures , vol.21 , pp. 1259-1271
- Schwalbe, K.H.¹

21
- 0021583672
- Geometry and size effects on J-R and δ-R curves under plane stress conditions
- American Society for Testing and Materials, West Conshohocken, PA
- (1984) Fracture Mechanics: Fifteenth Symposium, ASTM STP 833 , pp. 577-605
- Hellman, D.¹ Schwalbe, K.H.²

22
- 0022985623
- On the experimental determination of CTOD based R-curves
- Proceedings of the Conference on Crack Tip Opening Displacement in Elastic-Plastic Fracture Mechanics, 1986 , pp. 115-132
- Hellman, D.¹ Schwalbe, K.H.²

23
- 0020553537
- A perspective on R-curves and instability theory
- J. C. Lewis and G. Sines, Eds., American Society for Testing and Materials, West Conshohocken, PA
- (1983) Fracture Mechanics: Fourteenth Symposium - Volume I: Theory and Analysis, ASTM STP 791 , pp. 561-584
- McCabe, D.E.¹ Ernst, H.A.²

* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.