Assessment of the accuracy and classification of weigh-in-motion systems: Part 2. European specification

Heavy Vehicle Systems

Volumn 7, Issue 2-3, 2000, Pages 153-168

  Jacob, Bernard ^a   O'Brien, Eugene J ^b   Newton, W ^c  

^a Lab Ctrl des Ponts et Chaussees   (France)

^b TRINITY COLLEGE DUBLIN   (Ireland)

^c TRANSPORT RESEARCH LABORATORY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOBILES; CALIBRATION; PAVEMENTS; SENSORS; SOCIETIES AND INSTITUTIONS; SPECIFICATIONS; SYSTEMS ANALYSIS; WEIGHING;

AXLE LOAD; HEAVY VEHICLES; PAVEMENT CONDITIONS; WEIGH-IN MOTION SYSTEMS;

INTELLIGENT VEHICLE HIGHWAY SYSTEMS;

EID: 0034507992     PISSN: 13517848     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (22)

1. ASTM (1994), Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and test Method, ASTM Committee E-17, E-1318-94.
2. Barbour, I.A. (1993), Dynamic wheel loading on the A34 at Abingdon, Project Report 46, Transport Research Laboratory, United Kingdom.
3. Barbour, I.A. and Newton, W.N. (1995), 'Multiple-sensor weigh-in-motion', in Post Proceedings of First European Conference on Weigh-in-Motion of Road Vehicles, eds. B. Jacob et al., ETH, Zürich, March, pp. 133-142.
4. Blab, R. and Jacob, B. (2000), 'Test of four portable and one multiple-sensor WIM system', Heavy Vehicle Systems, A Series of the International Journal of Vehicle Design, Vol. 7, Nos 2/3, pp. 111-135.
5. Caprez, M., Doupal, E., Jacob, B., O'Connor, A.J. and O'Brien, E.J. (2000), 'Test of WIM sensors and systems on an urban road', Heavy Vehicle Systems, A Series of the International Journal of Vehicle Design, Vol. 7, Nos 2/3, pp. 169-190.
6. Cole, D.J. and Cebon, D. (1992), 'Spatial repeatability of dynamic tyre forces generated by heavy vehicles', Proc. Inst. Mech. Eng., Vol. 206, pp. 17-27.
7. COST 323 (1993), Description of the action COST323 (WIM-LOAD), report to the Technical Committee COST-Transport, COST/278/93 VII/468, EC/DGVII COST Transport Secretariat, Brussels, August 5th.
8. COST 323 (1997a), European Specification on Weigh-In-Motion of Road Vehicles, Draft 2.2, EUCO-COST/323/5/97, EC/DGVII COST Transport Secretariat, Brussels, June, 56 pp..
9. COST 323 (1997b), Collection and Analysis of Requirements as regards Weighing Vehicles in Motion, EUCO-COST/323/2E/97, EC/DGVII COST Transport Secretariat, Brussels, January, 64 pp.
10. COST 323 (1997c), Test of WIM sensors and systems on an urban road (Zurich 1993-95), Final report, EUCO-COST/323/6/97, EC/DGVII COST Transport Secretariat, Brussels, June, 89 pp.
11. COST 323 (1998), Test of four portable and one multiple-sensor WIM systems (Trappes 1996), Final report to the Management Committee, EUCO-COST/323/1/98, EC/DGVII COST Transport Secretariat, Brussels, March.
12. Gillmann, R. (1992), 'Calibration and Adjustment of Weigh-in-Motion Data', TRB'92, Paper no. 920886.
13. Gyenes, L. and Mitchell, C.G.B. (1992), 'The spatial repeatability of dynamic pavement loads caused by heavy goods vehicles', Heavy vehicles and roads: technology, safety and policy, Thomas Telford, London, United Kingdom.
14. Jacob, B. (1995), 'Spatial repeatability of axle impact forces on a road and multiple-sensor WIM', in Pre-Proceedings of the 1st European conference on WIM, ed. B. Jacob, ETH Zurich, pp. 147-156 (in French).
15. Jacob, B., and Dolcemascolo, V. (1997), Spatial Repeatability of Axle Loads on a Road, Report of the Element 5, DIVINE, RTD project, LCPC/OECD, Paris.
16. Jacob, B., Gaillac M., Stanczyk D. (1995), 'Assessments of two weighing stations and piezoceramic weighing sensors', in Post-Proceedings of the 1st European conference on WIM, eds. B. Jacob et al., ETH Zurich, pp. 219-228.
17. METT-LCPC (1993), Recommendations for the choice of sites and the acceptance of weighing stations, National French WIM Project, vol. 2, LCPC, Paris, Nov.
18. NWML (1995), In-motion road vehicle weighing instruments, First committee draft Recommendation, National Weights and Measures Laboratory (NWML) - UK.
19. O'Connor, T.L., O'Brien, E.J., Jacob, B. (1996), 'An experimental investigation of spatial repeatability', International Journal of Vehicle Design, Heavy Vehicle Systems, in print.
20. OIML (1996), In-motion road vehicle weighing instruments, Second committee draft Recommendation, International Organisation for Legal Metrology (OIML), Nov.
21. Stanczyk, D. (1991), 'Etalonnage automatique des stations de pesage', Actes de la Journée Nationale Pesage en Marche, LCPC, Paris, pp. 37-40.
22. VIEA (1994), Vehicle Weigh in Motion Sensor detailed user requirements, Vehicle Inspectorate Executive Agency, Bristol, UK, Sept.