Hard part machining AISI H13 (∼50 HRC) using amborite AMB90: A finite element modelling approach

Industrial Diamond Review

Volumn 60, Issue 587, 2000, Pages 305-312

[No Author Info available]

Author keywords

[No Author keywords available]

Indexed keywords

CUBIC BORON NITRIDE; CUTTING TOOLS; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; POLYCRYSTALLINE MATERIALS; SHEAR STRESS;

CONTINUOUS CHIPS; HARD PART MACHINING; POLYCRYSTALLINE CUBIC BORON NITRIDE (PCBN) TOOLS; SEGMENTED CHIPS;

MACHINING;

EID: 0034498902     PISSN: 00198145     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (29)

1. OKUSHIMA K. and KAKINO Y., 1971, 'The Residual Stress Produced By Metal Cutting', Annals of the CIRR Vol. 20/1, pp. 13-14
2. TAY A.O., STEVENSON M.G. and DE VAHL DAVIS G., 1974, 'Using The Finite Element Method To Determine Temperature Distributions In Orthogonal Machining', Proceeding Of The Institute Of Mechanical Engineers, Vol. 188, pp. 627-638
3. STRENKOWSKI J.S. and ATHAVALE S.M., 1997, 'A Partially Constrained Eulerian Orthogonal Cutting Model For Chip Control Tools', Transaction of the ASME, Journal Of Manufacturing Science And Engineering, Vol. 119, pp. 681-688
4. RAMESH M.V., SEETHARAMU K.N., GANESAN N. and KUPPUSWAMY G., 1999, 'Finite Element Modelling Of Heat Transfer Analysis In Machining Of Isotropic Materials', International Journal Of Heat And Mass Transfer, Vol. 42, pp. 1569-1583
5. KIM K.W., LEE W.Y. and SIN H.C., 1999, 'A Finite Element Analysis Of Machining With The Tool Edge Considered', Journal Of Materials Processing Technology, Vol. 86, pp. 45-55
6. CARROLL III J.T. and STRENKOWSKI J.S., 1988, 'Finite Element Models of Orthogonal Cutting With Applications To Single Point Diamond Turning', International Journal Of Mechanical Science, Vol. 30, pp. 899-920
7. LIN Z-C, LIN Y-Y, 1999, 'A Study Of An Oblique Cutting Model', Journal Of Materials Processing Technology, Vol. 86, pp. 119-130
8. SHIRAKASHI T., 1993, 'New Trend On Machining Theory - Way To Computational Machining', International Journal Of Japan Society of Precision Engineering, Vol. 27, pp. 299-302
9. HUNAG J.M. and BLACK J.T., 1996, 'An Evaluation Of Chip Separation Criteria For The FEM Simulation Of Machining', Transaction Of The ASME, Journal Of Manufacturing Science And Engineering, Vol. 118, pp. 545-554
10. NG E-G, 2000, Ph.D. Dissertation : 'Modelling Of The Cutting Process When Machining Hardened Steel With PCBN Tooling', University Of Birmingham, School Of Manufacturing And Mechanical Engineering, To be submitted
11. WU D.W. and MATSUMOTO Y., 1990, 'The Effect Of Hardness On Residual Stresses In Orthogonal Machining Of AISI 4340 Steel', Transaction Of The ASME, Journal Of Engineering For Industry, Vol. 112, pp. 245-252
12. NG E-G and ASPINWALL D.K., 1999, 'The Effect Of Workpiece Hardness And Cutting Speed On The Machinability Of AISI H13 Hot Work Die Steel When Using PCBN Tooling', Proceeding of the 1999 International Mechanical Engineering Congress and Exposition, Nashville, USA, pp. 773-780
13. BAKER M., ROSLER J. and SIEMERS C., 1999, 'Development Of A Finite-Element-Model For The Design Of Machinable Titanium Alloys', Proceedings Of The 2nd International German And French Conference on High Speed Machining, Darmstadt, Germany, pp. 179-184
14. NG E-G, ASPINWALL D.K., BRAZIL D. and MONAGHAN J., 1999, 'Modelling Of Temperature And Forces When Orthogonally Machining Hardened Steel', International Journal Of Machine Tools And Manufacture, Vol. 39, pp. 885-90
15. USUI E., OBIKAWA T. and SHIRAKASHI T., 1984, 'Study On Chip Segmentation In Machining Titanium Alloy', Proceedings Of The 5th International Conference On Production Engineering, Tokyo, Japan, pp. 233-239
16. MARUSICH T.D. and ORTIZ M., 1995, 'Modelling And Simulation Of High Speed Machining', International Journal Of Numerical Methods In Engineering, Vol. 38, pp. 3675-3694
17. SANDSTROM D.R. and HODOWANY J.N., 1998, 'Modelling The Physics Of Metal Cutting In High-Speed Machining', International Journal Of Machining Science And Technology: Selected And Reviewed Papers From The CIRP International Workshop On Modelling Of Machining Operations, Vol. 2, pp. 343-353
18. DEEMING A.P., MUNZ W.D. and SMITH I.J., 1998, 'Dry High Performance Machining (HPM) Of Die And Moulds Using PVD Coated Solid Cemented Carbide Tools', Proceedings Of The Conference On Behaviour Of Materials In Machining: Opportunities And Prospects For Improved Operations, Stratford-Upon Avon, UK, pp. 12-22
19. LUO Q., RAINFORTH W.M., DONOHUE L.A., WADSWORTH I. and MUNZ W.D., 1999, 'Tribological Investigation Of TiAICrN And TiAIN/CrN Coatings Grown By Combined Steered-Arc/Unbalance Megnetron Deposition°, Vacuum, Vol. 53, pp. 123-126
20. PFLUGER E., SCHROER A., VOUMARD R, DONOHUE L. and MUNZ W.D., 1999, 'Influence Of Incorporation Of Cr And Y On The Wear Performance Of TiAIN Coatings At Elevated Temperatures', Surface And Coatings Technology, Vol. 115, pp. 17-23
21. CHILDS T.H.C., MAEKAWA K. and MAULIK R, 1988, 'Effects Of Coolant On Temperature Distribution In Metal Machining', Journal Of Materials Science And Technology, Vol. 4, pp. 1006-1017
22. LI X, KOPALINSKY E.M. and OXLEY P.L.B., 1995, 'A Numerical Method For Determining Temperature Distributions In Machining With Coolant Part 2: Calculation Method And Results', Proceeding Of The Institute Of Mechanical Engineers, Vol. 209, pp. 45-52
23. SMITH A., LAGERBERG S., DAHLMAN P and KAMINSKI J., 1999, 'High Pressure Jet Assisted Turning', Proceedings Of The Third International Conference On Industrial Tooling 99, Southampton, U.K., pp. 62-71
24. DILLON O.W. and ZHANG H., 1999, 'An Analysis Of Cutting Using A Grooved Tool', Proceedings Of The 2nd CIRP International Workshop On The Modelling Of Machining Operations, Nantes, France
25. HIBITT, KARLSSON and SORENSEN, 1998, ABAQUS/Explicit™ Theory And Users' Manuals, Version 5.8
26. SHIH A.J., 1996, 'Finite Element Analysis of Orthogonal Metal Cutting Mechanics', International Journal of Machine Tools and Manufacture, Vol. 36, pp. 255-273
27. MARUSICH T.D. and ORTIZ M., 1994, 'Simulation of High Speed Machining', Proceeding of the Recent Developments In Finite Element Analysis, pp. 62-77
28. BURYTA D., SOWERBY R. and YELLOWLEY I., 1994, 'Stress Distributions on the Rake Face During Orthogonal Machining', International Journal Of Machine Tools and Manufacture, Vol. 34, No. 55, pp. 721-739
29. OXLEY P.L.B., 1989, 'Mechanics of Machining: An Analytical Approach To Assessing Machinability', Ellis Norwood Limited, ISBN 0-7458-0007-6