Assessing a flow-based finite element model for the sintering of viscoelastic particles

Chemical Engineering Science

Volumn 55, Issue 23, 2000, Pages 5733-5746

  Hooper, Russell ^a   Macosko, Christopher W ^a   Derby, Jeffrey J ^a  

^a University of Minnesota   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COALESCENCE; DEFORMATION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; MORPHOLOGY; PARTICLES (PARTICULATE MATTER); POWDERS; SINTERING; STRESSES; VISCOELASTICITY; VISCOUS FLOW;

VISCOELASTIC PARTICLES;

POLYMERS;

FINITE ELEMENT METHOD; POLYMER; POWDER; SINTERING; VISCOELASTICITY;

EID: 0034353066     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0009-2509(00)00224-4     Document Type: Article

References (65)

1. Asaithambi, N. S. (1995). Numerical analysis: Theory and practice. New York: Saunders College Publishing.
2. Baaijens, F. P. T. (1998). Mixed finite element methods for viscoelastic flow analysis: A review. Journal of Non-Newtonian Fluid Mechanics, 9, 361-385.
3. Bellehumeur, C. T. (1997). Polymer sintering and its role in rotational molding. Ph.D. thesis, Department of Chemical Engineering, McMaster University, Hamilton, Ontario.
4. Bellehumeur, C. T., Bisaria, M. K., & Vlachopoulos, J. (1996). An experimental study and model assessment of polymer sintering. Polymer Engineering and Science, 36, 2198.
5. Bellehumeur, C. T., Kontopoulou, M., & Vlachopoulos, J. (1998). The role of viscoelasticity in polymer sintering. Rheologia Acta, 57(3), 270.
6. Bird, R. B., Armstrong, R. C., & Hassager, O. (1987). Dynamics of polymeric liquids, vol. 1 (2nd ed.). New York: Wiley.
7. Bird, R. B., Stewart, W. E., & Lightfoot, E. N. (1965). Transport phenomena, New York: Wiley.
8. Brinker, C. J., & Scherer, G. W. (1990). Sol-gel science, (pp. 675-742). San Diego, CA: Academic Press, Inc.
9. Brooks, A. N., & Hughes, T. J. R. (1982). Streamline upwind/PetrovGalerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations. Computer Methods in Applied Mechanics and Engineering, 32, 199-259.
10. Brown, R., Szady, M., Northey, P., & Armstrong, R. (1993). On the numerical stability of mixed finite-element methods for viscoelastic flows governed by differential constitutive equations. Theoretical and Computational Fluid Dynamics, 5, 77-106.
11. Cosgrove, G., Strozier, J., & Seigle, L. (1976). An approximate analytical model for the late-stage sintering of an array of rods by viscous flow. Journal of Applied Physics, 47(4), 1258-1264.
12. Crochet, M. J., Davies, A. R., & Walters, K. (1984). Numerical simulation of non-newtonian flow. New York: Elsevier.
13. Derjaguin, B. V., Muller, V. M., & Toporov, Y. P. (1975). Effect of contact deformations on the adhesion of particles. Journal of Colloid and Interface Science, 55(2), 314-326.
14. Eshelby, J. D. (1949). Discussion of 'Seminar on the Kinetics of Sintering'. Metallurgical Transactions, 185, 796-813.
15. Exner, H. E. (1979). Principles of single phase sintering. Reviews on Powder Metallurgy and Physical Ceramics, 1(1-4), 7-251.
16. Frenkel, J. (1945). Viscous Flow of Crystalline Bodies under the Action of Surface Tension. Journal of Physics, IX(5), 385-391.
17. German, R. M., Messing, G. L., & Cornwall, R. Eds. (1996). Sintering Technology. New York: Marcel Dekkar, Inc.
18. Guenette, R., & Fortin, M. (1995). New mixed finite element method for computing viscoelastic flows. Journal of Non-Newtonian Fluid Mechanics, 60(1), 27-52.
19. Hiram, Y., & Nir, A. (1983). A Simulation of Surface Tension Driven Coalescence. Journal of Colloid and Interface Science, 95(2), 462-470.
20. Hopper, R. (1984). Coalescence of two equal cylinders: exact results for creeping viscous plane flow driven by capillarity. Journal of the American Ceramic Society (Communications), 67, C262-C264.
21. Hopper, R. (1990). Plane stokes flow driven by capillarity on a free surface. Journal of Fluid Mechanics, 213, 349-375.
22. Hopper, R. (1991). Plane Stokes flow driven by capillarity on a free surface. Part 2. Further developments. Journal of Fluid Mechanics, 230, 355-364.
23. Hopper, R. (1992). Stokes flow of a cylinder and half-space driven by capillarity. Journal of Fluid Mechanics, 243, 171-181.
24. Jagota, A., Argento, C., & Mazur, S. (1998). Growth of adhesive contacts for maxwell viscoelastic spheres. Journal of Applied Physics, 83(1), 250-259.
25. Jagota, A., & Dawson, P. (1988). Micromechanical modeling of powder compacts-1. Unit problems for sintering and traction induced deformation. Acta Metallurgica, 36(9), 2551-2561.
26. Jagota, A., & Dawson, P. (1990). Simulation of the Viscous Sintering of Two Particles. Journal of the American Ceramic Society, 75(1), 173-177.
27. Johnson, K. L., Kendall, K., & Roberts, A. D. (1971). Surface energy and the contact of elastic solids. Proceedings of the Royal Society of London A, 13, 301-313.
28. Kingery, W. D., Bowen, H. K., & Uhlmann, D. R. (1976). Introduction to ceramics (2nd ed.). New York: John Wiley.
29. Kuczynski, G. C. (1972). Physics and chemistry of sintering. Advances in Colloid and Interface Science, 3, 275-330.
30. Kuiken, H. (1990). Viscous sintering: the surface-tension-driven flow of a liquid form under the influence of curvature gradients at its surface. Journal of Fluid Mechanics, 214, 503-515.
31. Levich, V. G. (1962). Physicochemical hydrodynamics. Englewood Cliffs, NJ: Prentice-Hall, Inc.
32. Lin, F., & Meier, D. J. (1996). A study of latex film formation by atomic force microscopy. 2. File formation vs. rheological properties. Langmuir, 12(11), 2774.
33. Lontz, J. (1964). Sintering of polymer materials, In Bonus, & Hausner (Eds.), Fundamental phenomena in the materials sciences, New York: Plenum Press.
34. Lynch, D. R. (1982). Unified approach to simulation on deforming elements with application to phase change problems. Journal of Computational Physics, 47, 387-411.
35. Mackenzie, J. K., & Shuttleworth, R. (1949). A Phenomenological theory of sintering. Proceedings of Physics Society, 62(12-B), 833-852.
36. Macosko, C. W. (1994). Rheologyprinciples, measurements, and applications. New York: VCH Publishers.
37. Martínez-Herrera, J. (1995). Finite element analysis of the sintering of ceramic powders. Ph.D. thesis. University of Minnesota.
38. Martinez-Herrera, J. I., & Derby, J. J. (1994). Analysis of capillary-driven viscous flows during the sintering of ceramic powders. A.I.Ch.E. Journal, 40(11), 1794-1803.
39. Martínez-Herrera, J. I., & Derby, J. J. (1995). Viscous sintering of spherical particles via finite element analysis. Journal of the American Ceramic Society, 78(3), 645-649.
40. Maugis, D. (1992). Adhesion of spheres: The JKR-DMT transition using a dugdale model. Journal of Colloid and Interface Science, 150(1), 243-269.
41. Maugis, D. (1995). Extension of the Johnson-Kendall-Roberts theory of elastic contact of spheres to large contact radii. Langmuir, 11(2), 679-682.
42. Mazur, S. (1995). Coalescence of polymer particles, In M. Narkis, & N. Rosenzweig, (Eds.), Polymer powder technology. New York: Wiley (Chapter 8).
43. Mazur, S., & Plazek, D. J. (1994). Viscoelastic effects in the coalescence of polymer particles. Progress in Organic Coatings, 24(1/4), 225.
44. Moon, J. R. (1971). Sintering of metal powders. Power Metallury International, 3, 147-152, 194-199.
45. Pokluda, O., Bellehumeur, C. T., & Vlachopoulos, J. (1997). Modification of Frenkel's model for sintering. A.I.Ch.E. Journal, 43(12), 3253-3256.
46. Rabinovich, E. M. (1985). Preparation of glass by sintering. Journal of Materials Science, 20, 4259-4297.
47. Reddy, J. N. (1984). An introduction to the finite element method. New York: McGraw-Hill.
48. Richardson, S. (1992). Two-dimensional slow viscous flows with time-dependent free boundaries driven by surface tension. European Journal of Applied Mathematics, 3, 193-207.
49. Ross, J., Miller, W., & Weatherly, C. (1981). Dynamic computer simulation of viscous flow sintering kinetics. Journal of Applied Physics, 52(6), 3884-3888.
50. Ruschak, K. J. (1980). A method for incorporating free boundaries with surface tension in finite element fluid-flow simulators. International Journal for Numerical Methods in Engineering, 15, 639-648.
51. Scherer, G. W. (1977). Sintering of low-density glasses: I, Theory. Journal of the American Ceramic Society, 60(5-6), 236-239.
52. Scherer, G. W. (1979). Sintering inhomogeneous glasses: Application to optical waveguides. Journal of Non-Crystalline Solids, 34, 239-256.
53. Scherer, G. W. (1984). Viscous sintering of a bimodal pore size distribution. Journal of the American Ceramic Society, 67(11), 709-715.
54. Scherer, G. W., & Garino, T. (1985). Viscous sintering on a rigid substrate. Journal of the American Ceramic Society, 68(4), 216-220.
55. Shaw, N. J. (1989a). Densification and coarsening during solid state sintering of ceramics: A review of models I. densification. Powder Metallurgy International, 21(3), 16-21.
56. Shaw, N. J. (1989b). Densification and coarsening during solid state sintering of ceramics: A review of models II. Grain Growth. Powder Metallurgy International, 21(5), 31-33.
57. Shaw, N. J. (1989c). Densification and coarsening during solid state sintering of ceramics: A review of models III. Coarsening. Powder Metallurgy International, 21(6), 25-29.
58. Somiya, S., & Moriyoshi, Y. Eds. (1990). Sintering key papers. Amsterdam: Elsevier.
59. Tadmor, Z., & Gogos, C. G. (1979). Principles of polymer processing. New York: Wiley.
60. van de Vorst, G. (1993). Integral method for a two-dimensional Stokes flow with shrinking holes applied to viscous sintering. Journal of Fluid Mechanics, 257, 667-689.
61. van de Vorst, G. (1994). Numerical simulation of axisymmetric viscous sintering. Engineering Analysis with Boundary Elements, 14, 193-207.
62. van de Vorst, G., Mattheij, R., & Kuiken, H. (1992). A boundary element solution for two-dimensional viscous sintering. Journal of Computational Physics, 100, 50-63.
63. Waldron, M. B., & Daniell, B. L. (1978). Sintering. London: Heyden and Sons.
64. Yan, M.F. (1982). Sintering of ceramics and metals, In G. Y. Chin (Ed.), Advances in powder technology, (pp. 99-133). Metals Park, Ohio: American Society for Metals.
65. Zhou, H., & Derby, J. J. (1998). Three-dimensional finite element analysis of viscous sintering. Journal of the American Ceramic Society, 81(3), 533-540.