The stability of cylindrical and conic shells made of composite materials with an elastoplastic matrix

International Applied Mechanics

Volumn 36, Issue 6, 2000, Pages 697-728

  Babich, I Yu ^a   Semenyuk, N P ^a  

^a S P TIMOSHENKO INSTITUTE OF MECHANICS   (Ukraine)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0034347896     PISSN: 10637095     EISSN: None     Source Type: Journal    
DOI: 10.1007/BF02681981     Document Type: Article

References (63)

1. 1. N. A. Alfutov, I. A. Dymkov, and Yu. G. Cherepanov, "The stability of metal-composite shells under temperature-force actions," Izv. RAN, Mekh. Tverd. Tela, No. 1, 131-141 (1994).
2. 2. N. A. Alfutov, P. A. Zinov'ev, and B. G. Popov, Design of Multilayer Composite Plates and Shells [in Russian], Mashinostroenie, Moscow (1984).
3. 3. I. Ya. Amiro and N. Ya. Prokopenko, "The influence of the arrangement of layers and their mechanical characteristics on the stability of a two-layer cylindrical shell," Prikl. Mekh., 6, No. 3, 9-15 (1970).
4. 4. D. V. Babich, "The rational reinforcement of compression shells," Mekh. Komp. Mater., No. 1, 157-160 (1991).
5. 5. I. Yu. Babich, "Analysis of three-dimensional and applied formulations in the theory of stability of rods made of composite materials," Prikl. Mekh., 25, No. 2, 7-12 (1989).
6. 6. I. Yu. Babich and A. N. Guz', "The stability of rods, plates, and shells made of composite materials (a three-dimensional formulation): A review," Prikl. Mekh., 19, No. 10, 3-19 (1983).
7. 7. I. Yu. Babich, A. N. Guz', and L. V. Deriglazov, "The stability of three-layer anisotropic cylindrical shells," Prikl. Mekh., 19, No. 9, 13-20 (1983).
8. 8. I. Yu. Babich, A. N. Guz', I. I. Chernushenko, and N. A. Shul'ga, "Estimating the accuracy of theories of the stability of cylindrical shells under external pressure," Prikl. Mekh., 10, No. 10, 16-21 (1974).
9. 9. I. Yu. Babich, A. N. Guz', and N. A. Shul'ga, "Studying the dynamics and stability of composite materials in a three-dimensional formulation (review)," Prikl. Mekh., 18, No. 1, 3-27 (1982).
10. 10. I. Yu. Babich and L. V. Deriglazov, "The stability of three-layer anisotropic cylindrical shells," Dokl. Akad. Nauk Ukr. SSR, Ser. A, No. 2, 26-29 (1982).
11. 11. I. Yu. Babich and V. I. Kilin, "The stability of a three-layer orthotropic cylindrical shell under axial compression," Prikl. Mekh., 21, No. 6, 44-49 (1985).
12. 12. I. Yu. Babich and V. I. Kilin, "Studying the effect of a nonsymmetric arrangement of layers on the stability of three-layer cylindrical shells under axial compression," Teor. Prikl. Mekh., No. 19, 103-106 (1988).
13. 13. I. Yu. Babich and M. A. Cherevko, "The stability of cylindrical shells with an elastoplastic filler under axial compression," Prikl. Mekh., 20, No. 3, 60-64 (1984).
14. 14. I. Yu. Babich, I. I. Chernushenko, and N. A. Shul'ga, "Comparative analysis of applied theories of the stability of plates and cylindrical shells made of composite materials," Soprot. Mater. Teor. Sooruzh., No. 25, 22-26 (1975).
15. 15. I. V. Banichuk, V. V. Kobelev, and R. B. Rikards, Optimization of Structural Elements Made of Composite Materials [in Russian], Mashinostroenie, Moscow (1988).
16. 16. A. N. Bozhinskii and A. S. Vol'mir, "Experimental investigations of cylindrical shells beyond the elastic limit," Dokl. Akad. Nauk SSSR, 142, No. 2, 299-301 (1962).
17. 17. V. V. Bolotin and Yu. N. Novichkov, The Mechanics of Multilayer Structures [in Russian], Mashinostroenie, Moscow (1981).
18. 18. G. A. Vanin, The Micromechanics of Composite Materials [in Russian], Naukova Dumka, Kiev (1985).
19. 19. G. A. Vanin and N. P. Semenyuk, "The stability of reinforced laminated cylindrical shells with allowance for local destructions," in: The Mechanics of Structures Made of Composite Materials [in Russian], Nauka, Novosibirsk (1984), pp. 138-143.
20. 20. G. A. Vanin and N. P. Semenyuk, "The influence of microstructural destructions on the stability of fibrous shells," Prikl. Mekh., 20, No. 1, 38-43 (1984).
21. 21. G. A. Vanin and N. P. Semenyuk, "The stability of shells made of fibrous composites with initial cracks in the microstructure," Prikl. Mekh., 23, No. 10, 12-19 (1987).
22. 22. G. A. Vanin and N. P. Semenyuk, The Stability of Shells Made of Composite Materials with Imperfections [in Russian], Naukova Dumka, Kiev (1987).
23. 23. G. A. Vanin, N. P. Semenyuk, and R. F. Emel'yanov, The Stability of Reinforced Shells [in Russian], Naukova Dumka, Kiev (1978).
24. 24. K. Washizu, Variational Methods in Elasticity and Plasticity [Russian translation], Mir, Moscow (1987).
25. 25. A. S. Vol'mir, The Stability of Deformed Systems [in Russian], Fizmatgiz, Moscow (1967).
26. 26. S. K. Godunov, "Numerical solution of boundary-value problems for systems of ordinary differential equations," Uspekhi Mat. Nauk, 16, No. 3 (99), 171-174 (1961).
27. 27. É. I. Grigolyuk and V. V. Kabanov, The Stability of Shells [in Russian], Nauka, Moscow (1978).
28. 28. V. S. Gudramovich, The Stability of Elastoplastic Shells [in Russian], Naukova Dumka, Kiev (1987).
29. 29. A. N. Guz,' Fundamentals of the Three-Dimensional Linear Theory of the Stability of Deformable Bodies [in Russian], Vyshcha Shk., Kiev (1986).
30. 30. A. N. Guz', The Fracture Mechanics of Composite Materials under Compression [in Russian], Naukova Dumka, Kiev (1989).
31. 31. A. N. Guz' and I. Yu. Babich, The Three-Dimensional Theory of the Stability of Deformable Bodies, Vol. 4 of the six-volume series Spatial Problems of the Theory of Elasticity and Plasticity [in Russian], Naukova Dumka, Kiev (1985).
32. 32. V. I. Gulyaev, V. A. Bazhenov, and P. P. Lizunov, The Nonclassical Theory of Shells and Its Application to the Solution of Engineering Problems [in Russian], Vyshcha Shk., Kiev (1978).
33. 33. V. G. Zubchaninov, Fundamentals of the Theory of Elasticity and Plasticity [in Russian], Vyssh. Shk., Moscow (1990).
34. 34. A. A. Il'yushin, Plasticity [in Russian], Gostekhizdat, Moscow (1948).
35. 35. L. M. Kachanov, Fundamentals of the Theory of Plasticity [in Russian], Nauka, Moscow (1969).
36. 36. A. B. Kitaigorodskii and N. P. Semenyuk, "The stability of composite conic shells with allowance for cracking in layers," Mekh. Komp. Mater., No. 6, 1036-1041 (1985).
37. 37. V. D. Klyushnikov, The Stability of Elastoplastic Systems [in Russian], Nauka, Moscow (1980).
38. 38. V. V. Vasil'ev, V. D. Protasov, V. V. Bolotin, et al., Composite Materials: a Reference Book [in Russian], Mashinostroenie, Moscow (1990).
39. 39. K. G. Kreider and K. M. Prewo, "Boron-fiber-reinforced aluminum," in: Metallic Matrix Composites, Vol. 4 of the eight-volume series Composite Materials [in Russian], Mashinostroyeniye, Moscow (1978), pp. 387-405.
40. 40. Yu. V. Nemirovskii, "The stability of reinforced shells and plates beyond the elastic limit," Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 2, 67-74 (1970).
41. 41. C. T. Herakovich (ed.), Inelastic Behavior of Composite Materials, Presented at 1975 ASME Winter Annual Meeting (Houston, Texas, November 30-December 5), ASME, New York (1975).
42. 42. A. G. Piskunov and V. E. Verizhenko, Linear and Nonlinear Problems of Design of Laminated Structures [in Russian], Budivel'nyk, Kiev (1986).
43. 43. R. B. Rikards and G. A. Teters, The Stability of Shells Made of Composite Materials [in Russian], Zinatne, Riga (1974).
44. 44. N. P. Semenyuk, "The effect of instability of the material in anisotropic shells," Prikl. Mekh., 16, No. 9, 115-118 (1971).
45. 45. N. P. Semenyuk, "The stability of a piecewise-homogeneous cylindrical shell," Prikl. Mekh., 21, No. 5, 55-60 (1985).
46. 46. A. M. Skudra and F. Ya. Bulavs, The Structural Theory of Reinforced Plastic [in Russian], Zinatne, Riga.
47. 47. I. A. Birger and B. F. Shorr (ed.), The Thermal Endurance of Machine Components [in Russian], Mashinostroenie, Moscow (1975).
48. 48. G. A. Teters, Complex Loading and Stability of Shells Made of Polymeric Materials [in Russian], Zinatne, Riga (1969).
49. 49. Yu. N. Shevchenko and R. G. Terekhov, Physical Equations of Thermoviscoplasticity [in Russian], Naukova Dumka, Kiev (1982).
50. 50. A. I. Shinkar', A. B. Kitaigorodskii, and S. K. Borshchevskaya, "Calculation of the eigenvalues for systems of linear ordinary differential equations," in: Algorithms and Programs for Solving Problems of the Mechanics of a Deformable Solid [in Russian], Naukova Dumka, Kiev (1976), pp. 154-159.
51. 51. I. Ya. Shtaerman and A. A. Pikovskii, Fundamentals of the Theory of Building Structures [in Russian], Stroiizdat, Moscow-Leningrad (1939).
52. 52. I. Yu. Babich, "Stability theory of rods, plates, and shells from composite materials," Int. Appl. Mech., 29, No. 10, 842-847 (1993).
53. 53. I. Yu. Babich, A. V. Boriseiko, and N. P. Semenyuk, "Stability of cylindrical shells formed from composite materials beyond the elastic limit," Int. Appl. Mech., 31, No. 12, 978-984 (1995).
54. 54. I. Yu. Babich, A. V. Boriseiko, and N. P. Semenyuk, "Stability of conical shells from composites beyond the elastic limit under axial compression," Int. Appl. Mech., 32, No. 12, 964-969 (1996).
55. 55. I. Yu. Babich, A. V. Boriseiko, and N. P. Semenyuk, "Stability of conical shells formed from reinforced materials under external pressure beyond the elastic limit," Int. Appl. Mech., 33, No. 3, 209-216 (1997).
56. 56. I. Yu. Babich and A. N. Guz', "Stability of fibrous composites," Appl. Mech. Rev., 45, No. 2, 61-80 (1992).
57. 57. I. Yu. Babich and N. P. Semenyuk, "Stability and initial postbuckling behavior of shells made of composites," Int. Appl. Mech., 34, No. 6, 507-537 (1998).
58. 58. I. Yu. Babich and N. P. Semenyuk, "Theoretical models in problems of the stability of shells made of composites," Int. Appl. Mech., 34, No. 10, 941-947 (1998).
59. 59. I. Yu. Babich, N. P. Semenyuk, and A. V. Boriseiko, "Stability and efficient design of cylindrical shells of metal composites subject to combination loading," Int. Appl. Mech., 35, No. 6, 595-601 (1999).
60. 60. A. N. Guz' and I. Yu. Babich, "Three-dimensional stability problems of composite materials and composite construction components," Rozprawy Inzynierskie, 27, No. 4, 613-631 (1979).
61. 61. R. Hill, "A general theory of uniqueness and stability in elastic-plastic solids," J. Mech. Phys. Solids., 6, 236-249 (1958).
62. 62. J. W. Hutchinson, "Plastic buckling," Adv. Appl. Mech., 14, 67-144 (1977).
63. 63. F. R. Shanley, "Inelastic column theory," J. Aeronaut. Sci., 14, 261-267 (1947).