Scuffing of area contacts under starved lubrication conditions

Tribology Transactions

Volumn 43, Issue 4, 2000, Pages 722-730

  Yoon, Hyung ^a   Sheiretov, Todor ^a   Cusano, Cris ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

Aluminum; Plastic shearing; Scuffing; Starved lubrication

Indexed keywords

ALUMINUM ALLOYS; BRASS; CAST IRON; SHEAR DEFORMATION; STEEL; TRIBOLOGY;

SCUFFING;

LUBRICATION;

ALUMINUM ALLOY; LUBRICANT STARVATION; SCUFFING; SLIDING CONTACT;

EID: 0034306551     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402000008982401     Document Type: Article

References (30)

1. Yoon, H. K., Poppe, C. H. and Cusano, C., "Screening Lubricants for Refrigerant Compressors: A Comparison Between a Pin and Block Tester and The High Pressure Tribometer," ASHRAE Trans., 101, 2, pp 322-334, (1995).
2. Tiwari, S. N., Pathak, J. P. and Malhotra, S. L., "Seizure Resistance of Leaded Aluminum Bearing Alloys," Materials Scicnce and Tech., 1, pp 1040-1045, (1985).
3. Yoon, H. K., Sheiretov, T. K. and Cusano, C. (1998), “Tribological Evaluation of Some Aluminum-Based Materials in Lubricant/Refrigerant Mixtures,” Wear, 218, pp 54-65,(1998).
4. Hotten, B. W., "Bidentate Organic Oxygen Compounds as Boundary Lubricants for Aluminum," Lubr. Eng., 30, pp 398-403. (1974).
5. Laemmle, J. T. and Bohaychick, J., "Novel Substituted Malonic Diesters: Effectiveness of Bidentate Bonding of Additives on Aluminum Workpiece Surfaces," Lubr. Eng., 43, pp 717-722, (1986).
6. Hironaka, S., and Sakurai, T., "The Effect of Pentaerythriol Partial Ester on the Wear of Aluminum," Wear, 80, pp 105-114, (1978).
7. Montgomery, R. S., "The Lubrication of Aluminum by Phtalic Esters," Wear, 9, pp 297-299, (1966).
8. Montgomery, R. S., "Chemical Effects on Wear in the Lubrication of Aluminum," Wear, 8, pp 289-302, (1965).
9. Sheiretov, T., Yoon, H. and Cusano, C., "Scuffing Under Dry Sliding Conditions: Part I-Experimental Studies," Trib. Trans., 41, 4. pp 435-446, (1998).
10. Tallian, T. E., "On Competing Failure Modes in Rolling Contact," ASLE Trans., 10. pp 418-439, (1967).
11. Johnson, K. L., Greenwood, J. A. and Poon, S. Y., "A Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication," Wear, 19, pp 91-108, (1972).
12. Cameron, A., "On a Generalized Theory of Scuffing," in Proc. 12th Leeds-Lyon Symp. on Trib., The Institut National des Sciences Appliquées, Lyon, France, pp 3-9,(1985).
13. Houperl, L. G. and Hamrock, B. J., "Elastohydrodynamic Lubrication Calculations Used as a Tool to Study Scuffing," in Proc. 12th Leeds-Lyon Symp. on Trib., The Institut National des Sciences Appliquées, Lyon, France, pp 146-155,(1985).
14. Andersson, S. and Salas-Russo, E., "The Influence of Surface Roughness and Oil Viscosity on the Transition in Mixed Lubricated Sliding Steel Contacts." Wear, 174, pp 71-79, (1994).
15. Evans, H. P. and Snidle, R. W., "A Model for Elastohydrodynamic Film Failure in Contacts Between Rough Surfaces Having Transverse Finish," Trans, of the ASME, Jour. of Trib., 118, 7, pp 847-857, (1996).
16. Spikes, H. A. and Cameron, A., "Scuffing as a Desorption Process-an Explanation of the Borsoff Effect," ASLE Trans., 17, pp 92-96, (1974).
17. Lee, S. C. and Cheng, H. S., "Scuffing Theory Modeling and Experimental Correlations," Trans, of the ASME. Jour. ofTrib., 113, 4, pp 237-334, (1991).
18. Cuotiongco, E. C. and Chung, Y. W., "Prediction of Scuffing Failure Based on Competitive Kinetics of Oxide Formation and Removal: Application to Lubricated Sliding of AISI 52100 Steel on Steel," Trib. Trans., 37, 3, pp 622-628,(1994).
19. Barber, J. R., "The Influence of Thermal Expansion in the Friction and Wear Process," Wear, 10, pp 155-159, (1967).
20. Dow, T. A. and Burton, R. A., "The Role of Wear in the Initiation of Thermoelastic Instabilities of Rubbing Contact," Jour, of Lubr. Tech., pp 71-75, (1973).
21. Greenwood, J. A. and Williamson, B. P., "Contact of Nominally Rat Surfaces," in Proc, R. Soc. London. Ser A, 295, pp 300-319. (1966).
22. Hirst, W. and Hollander, A. E., "Surface Finish and Damage in Sliding," in Proc, R. Soc. London, Ser A, 337, pp 379-394, (1974).
23. McCool, J. I. and Popgoshev, D., "Effect of Asperiiy Interaction on Scuffing," in Proc. 12th Leeds-Lyon Symp. on Trib., The Institut National des Sciences Appliquées, Lyon, France, pp 135-145, (1985).
24. Ludema, K. C., "A Review of Scuffing and Running-in of Lubricated Surfaces, With Asperities and Oxides in Perspective," Wear, 100, pp 315-331, (1984).
25. Enthoven, J. and Spikes, H. A., "Infrared and Visual Study of the Mechanisms of Scuffing," Trib. Trans., 39, 2, pp 441-447, (1996).
26. Mishina, H. and Sasada, T., "Observation of Micro-Structure in Seized Portion and Mechanism of Seizure," Trans, of the ASME, Jour. of Trib., 108, 1, pp 128-133,(1986).
27. Somi Reddy, A., Pramila Bai, B. N., Murthy, K. S. S. and Biswas, S. K., "Mechanism of Seizure of Aluminum-Silicon Alloys Dry Sliding Against Steel," Wear, 181-183, pp 658-667, (1995).
28. Rigney, D. A., Chen, L. H. and Naylor, G. S., "Wear Processes in Sliding Systems," Wear, 100, pp 195-219, (1984).
29. Razavizadeh, K. and Eyre, T. S., "Oxidative Wear of Aluminum Alloys," Wear, 79, pp 325-333, (1982).
30. Buckley, D. H., Surface Effects in Adhesion, Friction, Wear, and Lubrication, Tribology Series, 5, Elsevier, (1981).