-
1
-
-
85037793027
-
-
U.S. Department of Commerce, N94-12270, National Technical Information Service, July
-
Pratt and Whitney, United Technologies Inc., Advanced Control for Air Breathing Engines, Vol. 1, U.S. Department of Commerce, N94-12270, National Technical Information Service, July 1993.
-
(1993)
Advanced Control for Air Breathing Engines
, vol.1
-
-
-
2
-
-
85037793027
-
-
U.S. Department of Commerce, N94-12271, National Technical Information Service, July
-
General Electric Aircraft Engines, Advanced Control for Air Breathing Engines, Vol. 2, U.S. Department of Commerce, N94-12271, National Technical Information Service, July 1993.
-
(1993)
Advanced Control for Air Breathing Engines
, vol.2
-
-
-
3
-
-
85037793027
-
-
U.S. Department of Commerce, N94-12272, National Technical Information Service, July
-
Allison Gas Turbine, Advanced Control for Air Breathing Engines, Vol. 3, U.S. Department of Commerce, N94-12272, National Technical Information Service, July 1993.
-
(1993)
Advanced Control for Air Breathing Engines
, vol.3
-
-
-
4
-
-
0022440306
-
A theory of post-stall transients in axial compression systems: Part 1 - Development of equations, part 2 -application
-
Greitzer, E. M., and Moore, F. K., "A Theory of Post-Stall Transients in Axial Compression Systems: Part 1 - Development of Equations, Part 2 -Application," Journal for Engineering for Power, Vol. 108, Nos. 1, 2, 1986, pp. 68-78, 231-239.
-
(1986)
Journal for Engineering for Power
, vol.108
, Issue.1-2
, pp. 68-78
-
-
Greitzer, E.M.1
Moore, F.K.2
-
5
-
-
0029734493
-
Control of compressor stall inception - A bifurcation-theoretic approach
-
Liaw, D. C., and Abed, E. H., "Control of Compressor Stall Inception - A Bifurcation-Theoretic Approach," Automatica, Vol. 32, No. 1, 1996, pp. 109-115.
-
(1996)
Automatica
, vol.32
, Issue.1
, pp. 109-115
-
-
Liaw, D.C.1
Abed, E.H.2
-
6
-
-
0029410462
-
Simplified approach for control of rotating stall 1 and 2
-
Badmus, O. O., Chowdhury, S., Eveker, K. M., and Nett, C. N., "Simplified Approach for Control of Rotating Stall 1 and 2," Journal for Propulsion and Power, Vol. 11, No. 6, 1995, pp. 1195-1223.
-
(1995)
Journal for Propulsion and Power
, vol.11
, Issue.6
, pp. 1195-1223
-
-
Badmus, O.O.1
Chowdhury, S.2
Eveker, K.M.3
Nett, C.N.4
-
7
-
-
0029756726
-
Nonlinear control of surge in axial-compression systems
-
Badmus, O. O., Chowdhury, S., and Nett, C. N., "Nonlinear Control of Surge in Axial-Compression Systems," Automatica, Vol. 32, No. 1, 1996, pp. 59-70.
-
(1996)
Automatica
, vol.32
, Issue.1
, pp. 59-70
-
-
Badmus, O.O.1
Chowdhury, S.2
Nett, C.N.3
-
8
-
-
0027224864
-
Active control of rotating stall in a low-speed axial compressor
-
Paduano, J. D., Epstein, A. H., Valavani, L., Longley, J. P., Greitzer, E. M., and Guenette, G. R., "Active Control of Rotating Stall in a Low-Speed Axial Compressor," Journal of Turbomachinery, Vol. 115, 1993, pp. 48-56.
-
(1993)
Journal of Turbomachinery
, vol.115
, pp. 48-56
-
-
Paduano, J.D.1
Epstein, A.H.2
Valavani, L.3
Longley, J.P.4
Greitzer, E.M.5
Guenette, G.R.6
-
9
-
-
0027148134
-
Active suppression of rotating stall and surge in axial compressors
-
Day, I. J., "Active Suppression of Rotating Stall and Surge in Axial Compressors," Journal of Turbomachinery, Vol. 115, No. 1, 1993, pp. 40-47.
-
(1993)
Journal of Turbomachinery
, vol.115
, Issue.1
, pp. 40-47
-
-
Day, I.J.1
-
10
-
-
0029139064
-
Dynamic control of rotating stall in axial-flow compressors using aeromechanical feedback
-
Gysling, D. L., and Greitzer, K. M., "Dynamic Control of Rotating Stall in Axial-Flow Compressors Using Aeromechanical Feedback," Journal of Turbomachinery, Vol. 117, No. 3, 1995, pp. 307-319.
-
(1995)
Journal of Turbomachinery
, vol.117
, Issue.3
, pp. 307-319
-
-
Gysling, D.L.1
Greitzer, K.M.2
-
11
-
-
0031455854
-
Active control of an axial flow compressor vit pulsed air injection
-
D'Andrea, R., Behnken, R. L., and Murray, R. M., "Active Control of an Axial Flow Compressor vit Pulsed Air Injection," Journal of Turbomachinery, Vol. 119, No. 4, 1998, pp. 742-752.
-
(1998)
Journal of Turbomachinery
, vol.119
, Issue.4
, pp. 742-752
-
-
D'Andrea, R.1
Behnken, R.L.2
Murray, R.M.3
-
12
-
-
4243344431
-
Experiments in active control of stall on an aeroengine gas turbine
-
American Society of Mechanical Engineers, Fairfield, NJ, 1997; also Paper 97-GT-280
-
Freeman, C., Wilson, A. G., Day, I. J., and Swinbanks, M. A., "Experiments in Active Control of Stall on an Aeroengine Gas Turbine," International Gas Turbine and Aeroengine Congress and Exhibition, American Society of Mechanical Engineers, Fairfield, NJ, 1997; also Paper 97-GT-280, 1997.
-
(1997)
International Gas Turbine and Aeroengine Congress and Exhibition
-
-
Freeman, C.1
Wilson, A.G.2
Day, I.J.3
Swinbanks, M.A.4
-
13
-
-
0029236335
-
Integrated control of rotating stall and surge in aeroengines
-
Orlando, Florida, April
-
Eveker, K. M., Gysling, D. L., and Nett, C. N., "Integrated Control of Rotating Stall and Surge in Aeroengines," Proceedings of the International Society for Optical Engineering, Orlando, Florida, April 1995, pp. 21-35.
-
(1995)
Proceedings of the International Society for Optical Engineering
, pp. 21-35
-
-
Eveker, K.M.1
Gysling, D.L.2
Nett, C.N.3
-
14
-
-
84963853783
-
Nonlinear control of rotating stall using 1-D bleed valve with continuous air injection
-
Seattle, Washington
-
Yeung, S., and Murray, R. M., "Nonlinear Control of Rotating Stall Using 1-D Bleed Valve with Continuous Air Injection," Proceeding of 33rd Joint Propulsion Conference and Exhibit, Seattle, Washington, 1997.
-
(1997)
Proceeding of 33rd Joint Propulsion Conference and Exhibit
-
-
Yeung, S.1
Murray, R.M.2
-
15
-
-
0031372345
-
Reduction of bleed valve rate requirements for control of rotating stall using continuous air injection
-
Hartford, CT
-
Yeung, S., and Murray, R. M., "Reduction of Bleed Valve Rate Requirements for Control of Rotating Stall Using Continuous Air Injection," Proceedings of Conference on Control Applications, Hartford, CT, 1997, pp. 683-690.
-
(1997)
Proceedings of Conference on Control Applications
, pp. 683-690
-
-
Yeung, S.1
Murray, R.M.2
-
16
-
-
84973616667
-
Characterizing the effects of air injection on compressor performance for use in active control of rotating stall
-
American Society of Mechanical Engineers, Fairfield, NJ, 1997; also Paper 97-GT-316
-
Behnken, R. L., Leung, M., and Murray, R. M., "Characterizing the Effects of Air Injection on Compressor Performance for use in Active Control of Rotating Stall," Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition, American Society of Mechanical Engineers, Fairfield, NJ, 1997; also Paper 97-GT-316, 1997.
-
(1997)
Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition
-
-
Behnken, R.L.1
Leung, M.2
Murray, R.M.3
-
17
-
-
0028563509
-
Distributed nonlinear modeling and stability analysis of axial compressor stall and surge
-
Baltimore, MD, June
-
Mansoux, C. A., Gysling, D L., Setiawan, J. D., and Paduano, J. D., "Distributed Nonlinear Modeling and Stability Analysis of Axial Compressor Stall and Surge," American Control Conference, Baltimore, MD, June 1994, pp. 2305-2316.
-
(1994)
American Control Conference
, pp. 2305-2316
-
-
Mansoux, C.A.1
Gysling, D.L.2
Setiawan, J.D.3
Paduano, J.D.4
-
18
-
-
0031369055
-
Effects of noise, magnitude saturation and rate limits on rotating stall control
-
San Diego, CA, Dec.
-
Wang, Y., and Murray, R. M., "Effects of Noise, Magnitude Saturation and Rate Limits on Rotating Stall Control," Proceedings of the 36th Conference on Decision and Control, San Diego, CA, Dec. 1997, pp. 4682-4689.
-
(1997)
Proceedings of the 36th Conference on Decision and Control
, pp. 4682-4689
-
-
Wang, Y.1
Murray, R.M.2
-
19
-
-
0008332828
-
Effects of the shape of compressor characteristics on actuator requirements for rotating stall control
-
Philadelphia, PA, June
-
Wang, Y., and Murray, R. M., "Effects of the Shape of Compressor Characteristics on Actuator Requirements for Rotating Stall Control," Proceedings of the American Control Conference, Philadelphia, PA, June 1998, pp. 1996-2001.
-
(1998)
Proceedings of the American Control Conference
, pp. 1996-2001
-
-
Wang, Y.1
Murray, R.M.2
-
20
-
-
0028103032
-
Active stabilization of rotating stall in a three-stage axial compressor
-
Haynes, J. M., Hendricks, G. J., and Epstein, A. H., "Active Stabilization of Rotating Stall in a Three-Stage Axial Compressor," Journal of Turbomachinery, Vol. 116, 1994, pp. 226-239.
-
(1994)
Journal of Turbomachinery
, vol.116
, pp. 226-239
-
-
Haynes, J.M.1
Hendricks, G.J.2
Epstein, A.H.3
-
21
-
-
0008332482
-
-
Ph.D. Thesis, Dept. of Mechanical Engineering, California Inst. of Technology, Pasadena, CA, Sept.
-
Behnken, R. L., "Nonlinear Control and Modeling of Rotating Stall in an Axial Flow Compressor," Ph.D. Thesis, Dept. of Mechanical Engineering, California Inst. of Technology, Pasadena, CA, Sept. 1996.
-
(1996)
Nonlinear Control and Modeling of Rotating Stall in an Axial Flow Compressor
-
-
Behnken, R.L.1
-
22
-
-
0038213916
-
-
California Inst. of Technology, Pasadena, CA, Feb.
-
Murray, R. M., Wemhoff, E. L., and Kantner, M., "Sparrow Reference Manual," California Inst. of Technology, Pasadena, CA, Feb. 1995.
-
(1995)
Sparrow Reference Manual
-
-
Murray, R.M.1
Wemhoff, E.L.2
Kantner, M.3
-
23
-
-
0017927055
-
Prediction of compressor performance in rotating stall
-
Day, I. J., Greitzer, E. M., and Cumpsty, N. A., "Prediction of Compressor Performance in Rotating Stall," Journal of Engineering for Power, Vol. 100, No. 1, 1978, pp. 1-14.
-
(1978)
Journal of Engineering for Power
, vol.100
, Issue.1
, pp. 1-14
-
-
Day, I.J.1
Greitzer, E.M.2
Cumpsty, N.A.3
-
24
-
-
84928578785
-
Propagation of multiple short length-scale stall cells in an axial compressor rotor
-
American Society of Mechanical Engineers, Fairfield, NJ, 1999; also Paper 99-GT-97
-
Inoue, M., Kuroumaru, M., Tanino, T., and Furukawa, M., "Propagation of Multiple Short Length-Scale Stall Cells in an Axial Compressor Rotor," Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition, American Society of Mechanical Engineers, Fairfield, NJ, 1999; also Paper 99-GT-97, 1999.
-
(1999)
Proceedings of the International Gas Turbine and Aeroengine Congress and Exhibition
-
-
Inoue, M.1
Kuroumaru, M.2
Tanino, T.3
Furukawa, M.4
-
25
-
-
0019025026
-
Review - Axial compressor stall phenomena
-
June
-
Greitzer, E. M., "Review - Axial Compressor Stall Phenomena," Journal of Fluids Engineering, Vol. 102, June 1980, pp. 134-151.
-
(1980)
Journal of Fluids Engineering
, vol.102
, pp. 134-151
-
-
Greitzer, E.M.1
-
26
-
-
0343873152
-
-
NACA, TR R&M E53L28
-
Lucas, J. G., Finger, H. B., and Filippi, R. E., "Effect of Inlet-Annulus Area Blockage on Overall Performance and Stall Characteristics of an Experimental 15-Stage Axial-Flow Compressor," NACA, TR R&M E53L28, 1958.
-
(1958)
Effect of Inlet-annulus Area Blockage on Overall Performance and Stall Characteristics of an Experimental 15-stage Axial-flow Compressor
-
-
Lucas, J.G.1
Finger, H.B.2
Filippi, R.E.3
-
28
-
-
25344450173
-
-
U.S. Patent Application, Serial 60/037,774, Oct. 1997
-
Yeung, S., and Murray, R. M., "Actuator Bandwidth and Rate Limit Reduction for Control of Compressor Rotating Stall," U.S. Patent Application, Serial 60/037,774, Oct. 1997.
-
Actuator Bandwidth and Rate Limit Reduction for Control of Compressor Rotating Stall
-
-
Yeung, S.1
Murray, R.M.2
|